Thread Tools
Jan 14, 2013, 03:26 PM
Registered User
Discussion

Vibrations with KK2 v 1.5 camera gimbal


Still with some vibration problems I hope to solve soon...

Calpe Beach Flight KK2 FCB (3 min 53 sec)


servos do shake the camera for no apparent reason.

It may be necessary some software or hardware buffer to smooth the movement of the servo
Sign up now
to remove ads between posts
Mar 17, 2013, 12:21 AM
Registered User
Do you use the same gimbal aas your other thread... It seems to be shaky. your camera was shaking as you put the quad on your table. Gimbal must be stiff. no shakes.. As for servos, you will need hs 65 hb or futaba s3156.

Dan


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-HowTo KK2 camera stabilization set up, updating firmware to 1.5 rctestbench Multirotor Drone Electronics 44 Apr 17, 2015 08:01 AM
Discussion The New #18 HD Keychain Camera with AV Out (READ POSTS #1-#5 First) Tom Frank Aerial Photography 2243 Feb 08, 2014 08:35 AM
Discussion DIY Camera Gimbal KK2 autolevel antiguogrumete Multirotor Drone Talk 1 Mar 08, 2013 10:32 AM
Discussion DIY Camera Gimbal KK2 autolevel antiguogrumete Multirotor Drone Talk 0 Jan 08, 2013 06:19 PM
Help! kk quad board v 5.5 2.1 v firm black42799 Multirotor Drone Talk 3 Apr 09, 2012 03:03 PM