profile MIRAGE 2000 D parkjet EPP 15mm - RC Groups
Thread Tools
Jan 11, 2013, 06:53 PM
Registered User
Build Log

profile MIRAGE 2000 D parkjet EPP 15mm


Hi...

I started build of my new profile MIRAGE 2000 D parkjet...It is my own design, wingspann 820mm, length 1155mm...I used 15mm EPP plates, it is very good material, flexible, light and strong...It is prototype, I want to know ho it will fly and I would like to make it like night flyer later...Here is few pictures...I will share more pictures and video from maiden flight...
Sign up now
to remove ads between posts
Jan 12, 2013, 05:47 PM
Registered User
Mirage is done, I just had to make choice which setup I will use for it...weight is 350g with servos without motor, esc and battery...I expect RTF weight between 550 - 650g...
Last edited by pajlotmato; Jan 13, 2013 at 10:48 AM.
Jan 13, 2013, 03:31 PM
fortuna favet fortibus
Wobisch's Avatar
This one is very cool. Good luck with the maiden..
Jan 13, 2013, 07:35 PM
Fidler & twidler
empeabee's Avatar
looks interesting
Mike
Jan 14, 2013, 12:53 AM
Crash-safe
lessram's Avatar
Very slick build.
Is the impression wrong, or did you use 2x 6mm depron for vertical stabilizer ?

olli
Jan 14, 2013, 01:36 AM
Registered User
No, it is just one 7mm depron...I bought this engine for my Mirage : http://www.rctimer.com/index.php?gOo...9&productname=

Quote:
Originally Posted by lessram
Very slick build.
Is the impression wrong, or did you use 2x 6mm depron for vertical stabilizer ?

olli
Jan 15, 2013, 08:08 PM
Registered User
Waltjg's Avatar
Nice project Paj! W
Jan 16, 2013, 02:18 AM
Registered User
Subscribed... I hope U will give us some plans. I for one would like to build one ;-)
Jan 16, 2013, 04:28 AM
Registered User
Thanks Walt, I am gonna make him like night flyer

Quote:
Originally Posted by Waltjg
Nice project Paj! W
Jan 16, 2013, 04:30 AM
Registered User
Yes, sure, I will share plan after maiden flight, I am not sure about CG so I have to check it during first few flights...

Quote:
Originally Posted by Ronin
Subscribed... I hope U will give us some plans. I for one would like to build one ;-)
Jan 17, 2013, 10:08 PM
222 km/hr Parkjet flyer
solentlife's Avatar
Just to wet appetites ... there's another guys Mirage 2000 plans ...

Snice Mrage 2000 ....

Not my place to steal his fame ... but a search I'm sure will pull it up either on here or Wattflyer ....

Just while we wait for p[lans for this threads beauty !

Nigel
Jan 27, 2013, 03:57 PM
Registered User

Maiden flight


I maidened my Mirage today. It is excelent flyer. I should say it is high alpha flyer, like all deltas. My setup is motor DUALSKY XM2834CA-9 (980kv) with GWS 9x7,5 HD prop, ESC TURNIGY Plush 30A, Zippy Compact 3S 2200 mAh 25-30C battery and 3 x TURNIGY TGY-50090MG servos for elevons and rudder. I work on LED system for night flying now. Here are pictures and video from maiden flight...

EPP Mirage 2000 profile jet (4 min 16 sec)
Jan 27, 2013, 04:48 PM
Fidler & twidler
empeabee's Avatar
Quote:
Originally Posted by pajlotmato
I maidened my Mirage today. It is excelent flyer. I should say it is high alpha flyer, like all deltas. My setup is motor DUALSKY XM2834CA-9 (980kv) with GWS 9x7,5 HD prop, ESC TURNIGY Plush 30A, Zippy Compact 3S 2200 mAh 25-30C battery and 3 x TURNIGY TGY-50090MG servos for elevons and rudder. I work on LED system for night flying now. Here are pictures and video from maiden flight...
Gad what a brave man, maidening a plane that is exactly the same colour as the sky and the ground
She looked nose heavy, but I wasn't on the sticks
Mike
Feb 23, 2013, 12:22 PM
Registered User
So, my Mirage nightflyer is completely done. I replaced old motor for new TURNIGY 3530-1100kv with APC 10x5 E prop which has more static thrust. RTF weight is 950g now. I canīt wait to first night maiden flight, we have very bad weather here


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion MINI profile pusher jets: Mirage 2000, Mirage F1, F-18C ~ 14 in WS Fisticuffs! Pusher Prop Jet Models 4 Jan 13, 2010 07:51 AM
Build Log Mirage 2000, Mirage F1, F-18C Profile Pusher Jets -14 in WS Fisticuffs! Scratchbuilt Indoor and Micro Models 3 Dec 12, 2009 01:24 PM
Build Log Mirage 2000 Profile Jet with Plans Fisticuffs! Pusher Prop Jet Models 18 May 08, 2009 12:15 PM
Discussion EDF contest - 40mm profile Mirage 2000 kelberts Scratchbuilt Indoor and Micro Models 1 Mar 28, 2009 09:02 PM