Thread Tools
Old Jan 08, 2013, 06:09 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
Discussion

trex 450 AH-6


RC aerodyne send me a wrong little bird. it's just a regular MD500 . as you can see there is no weapon plus there should me a hole on the side of the fuselage to insert the weapon boom.





this is what it supposed to be.



Last edited by lightfighter363; Jan 08, 2013 at 06:51 PM.
Sign up now
to remove ads between posts
Old Jan 08, 2013, 06:18 PM
Ado is offline
Ado
Find More Posts by Ado
Ado
Meow?
Ado's Avatar
Not sure why you are posting this on here? Why aren't you letting RCA know and asking them to fix the issue? Posting it on here isn't going to get it fixed.
Old Jan 08, 2013, 06:31 PM
cap231ex is offline
Find More Posts by cap231ex
Track clear , smoke on !
cap231ex's Avatar
+1 Ado

This is not the way to resolve an issue with a supplier or vendor.

You should call Cliff or email him directly and explain your problem to him , going about it this way is in very poor taste and just not the way we do things around here.

Make sure you get ahold of Ciff and not just someone who works there , he wiil correct the issue you have quickly.
Old Jan 08, 2013, 06:53 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
Ok. my bad. but i am still thinking about the build so i figured to post it in here. RCa replied and they said this is the right fuselage.
Old Jan 09, 2013, 07:27 PM
darthdrk is offline
Find More Posts by darthdrk
My hobby is why Im broke
darthdrk's Avatar
RTFs and ARFS are killing the hobby.
Old Mar 09, 2013, 07:04 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
done





Old Mar 10, 2013, 04:52 PM
Bad Creation is offline
Find More Posts by Bad Creation
Registered User
Bad Creation's Avatar
Are those the Weighted tip Blades
Old Mar 10, 2013, 08:50 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
Quote:
Originally Posted by Bad Creation View Post
Are those the Weighted tip Blades
No idea what are they, they just came with the 4 blade rotor
Last edited by lightfighter363; Mar 10, 2013 at 10:28 PM.
Old Mar 11, 2013, 07:09 PM
Dongskie is offline
Find More Posts by Dongskie
Dongskie
Dongskie's Avatar
like!!!
Old Mar 12, 2013, 03:49 PM
FiveZigen is offline
Find More Posts by FiveZigen
Registered User
It looks like a copter X head so if the blades came with it then they are the unweighted version as Ehirobo does not sell the weighted version.
Old Mar 12, 2013, 04:03 PM
Keyrigger is offline
Find More Posts by Keyrigger
Love my scale Whirlybirds
Keyrigger's Avatar
It does look good but if there was one improvement I could suggest, get all four of the landing gear legs to touch the ground at the same time while it is at reast so that any rocking caused by the three legged gear cannot happen. It is the first time I have seen the flapping head at rest and it does look very real with the droop in the blades. Take care.

Don
Old Mar 12, 2013, 06:11 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
Quote:
Originally Posted by Keyrigger View Post
It does look good but if there was one improvement I could suggest, get all four of the landing gear legs to touch the ground at the same time while it is at reast so that any rocking caused by the three legged gear cannot happen. It is the first time I have seen the flapping head at rest and it does look very real with the droop in the blades. Take care.

Don
thanks for the advise man. yeah i will try to fix those LG.i'm trying to spread them more.

@fivezigen.

yes they came from copter x. what is the different between the weighted and non?
Old Mar 12, 2013, 06:36 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
a little test flight.

Trex 450 mh6 test flight (1 min 35 sec)
Old Mar 13, 2013, 03:10 PM
FiveZigen is offline
Find More Posts by FiveZigen
Registered User
The weighted blades were designed to be run with no E-stab system. The weight in the tip of the blade provides stability to the helicopter. How do the plastic blades fly with the flapping head you have? I have the same combo for a 500 scale project I am working on and was unsure wether there would be to much flap in the blade with the combo of the two together.
Old Mar 13, 2013, 08:41 PM
lightfighter363 is offline
Find More Posts by lightfighter363
Registered User
lightfighter363's Avatar
Quote:
Originally Posted by FiveZigen View Post
The weighted blades were designed to be run with no E-stab system. The weight in the tip of the blade provides stability to the helicopter. How do the plastic blades fly with the flapping head you have? I have the same combo for a 500 scale project I am working on and was unsure wether there would be to much flap in the blade with the combo of the two together.
This plastic are not bad. But i want to try the weighted tip. Where can i get them?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Cinestar 6 Maiden Flight and Setting Up AH PH chaurais Multirotor Talk 0 Sep 11, 2012 06:33 AM
Help! my syma s012 AH-64 wont charge ziro Coaxial Helicopters 1 Jul 22, 2012 06:21 AM
Discussion Crashed my new dji s800, 100%totally not my fault. I'm so friggn pissed off right now jasper7821 Multirotor Talk 137 Jun 13, 2012 11:46 AM
Discussion Ah no, lost my plane! **RECOVERED!** slowjett FPV Aircraft 49 Apr 29, 2012 04:44 AM
Question GPS and AH functions not working with Firmware 4.0 ross_badger Hoverfly Technologies 13 Apr 08, 2012 12:02 PM