K-E-os at last - Page 8 - RC Groups
Thread Tools
Feb 27, 2013, 11:11 AM
Gravity sucks.
mrittinger's Avatar
50"..... Perfect. I did my Taurus that size, on 3S 2600. Foam fully symettrical wing, 12.5 %, about 3 lbs rtf. Great flyer, easy to transport, affordable...
Sign up now
to remove ads between posts
Feb 27, 2013, 11:42 AM
Visitor from Reality
HI Mark
I suspect mine may have a teensy-weensy little bit more power than your Taurus.

4S 3600, OS 3825-750 motor...

Maybe end of this year, if Chicago ever gets a flying season to try the new models out, I may have a big re-think on my sports flying drivetrains.

When I flew slimers, my usual engine was a 25, which can propel the right model very well. Have been looking to settle down in electrics now that LiPos have taken over - last few years have been somewhat sluggish on the aeromodelling front. Your 3S numbers sound a lot more attractive than the bigger 4S I've been leaning to of late.

Great thing about having your own custom design/build service is that you only have to buy two or three battery sizes, as they'll run any model you have for that pack size.

Did you ever publish your little Taurus plan? It's another of the classy looking birds from its era. Love those swept back tailfins too.

Mar 03, 2013, 01:10 PM
Visitor from Reality
Well, I could have made the tailplane from 1/4" sheet balsa, but I went with pretty much my plan - a 1/4" thick balsa strip core capped top and bottom with 1/16" sheet balsa.

Yes, I know, I could have covered the lot in 1/16" sheet far faster too...

Whatever, the completed tailplane weighs around 55gm, though a little may disappear when I sand it down to section. The sheet of 1/4" x 4" x 36" balsa that didn't get the job weighs 75gm, for comparison, and it may have needed some help from another sheet.

Whatever, I now have a 3/8" thick tailplane with a good old fashioned tapered pair of elevators behind it.

Need to concentrate more - it's bad when you can't even stick to your own plan!

Mar 03, 2013, 09:31 PM
Build more, websurf less
FlyingW's Avatar
You'll be glad you built up the stab when you see the light coming through on an overhead pass.
Mar 06, 2013, 02:16 PM
Visitor from Reality
Okay folks, I'm re-starting this down in 'Balsa Builders' as it seems to be attracting a readership. Though I must confess that I'm not moving it along like I used to...

Why? Up the top of 'Electric Airplanes' are a bunch of people who I don't care to waste any more time on. So, if I shuffle off to Balsa Builders, I can shut out Electric Airplanes and not have to scroll past it.

A secondary reason is that K-E-os and a V60 are getting in the way of months and even years long posts on models that could be put together in days by anyone who can figure out the best end of a screwdriver to hold, to be nice.

See you around, builders.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion K + A F86- a microfan airplane at long last... Megowcoupe Electric Ducted Fan Jet Talk 13 Dec 21, 2009 05:11 PM
Video K&A L-39 at Western E-Fly And Rotor out of static balance bmiller Electric Plane Talk 6 Jun 30, 2008 08:43 AM
Discussion K&A L-39 video at Western E-Fly 2008 bmiller Electric Ducted Fan Jet Talk 10 Jun 17, 2008 12:37 AM
Discussion Free at Last, Free at last!!! Scrat Coaxial Helicopters 4 Aug 31, 2007 01:11 PM
"Putz-E" - at last Dereck Sport Planes 22 Sep 08, 2001 04:54 PM