Blade Nano CP X, mCP X, and 130X Head and Tail Stiffening Kits - RC Groups
Thread Tools
This thread is privately moderated by SYMAWD, who may elect to delete unwanted replies.
Jan 07, 2013, 04:13 PM
Trader Rating: 111
Registered User
SYMAWD's Avatar
Sold

Blade Nano CP X, mCP X, and 130X Head and Tail Stiffening Kits


These kits will reduce vibrations on your Nano CP X, mCP X, or 130X and get rid of slop on the ball links.

Each kit includes high quality silicone o-rings that will last a very long time. Commonly used rubber canopy grommets on the head will degrade and crack over time.

The Nano CP X kit (picture 1) includes 7 o-rings. Refer to mCP X picture for installation. Each kit is $2 shipped.

The mCP X kit (picture 2) includes 9 o-rings. Large orange o-rings go on the lower swash and blade grips. Small orange o-rings go on the upper swash. The black o-rings replace your feathering shaft dampers. They are much stiffer than the stock ones. Each kit is $2.50 shipped.

The 130X kit (picture 3) includes 11 o-rings. The large o-rings go on the upper and lower swash as well as the blade grips. If your 130X has DFC arms like in the picture, they obviously do not go on the blade grips as there is no longer a ball link up there. The small ones go on the tail grip balls, tail servo linkage ball, and on top of the pitch slider. Each kit is $2.50 shipped.

When you PayPal me, please tell me what kits and the quantity in the notes on PayPal. Thank You.

*Delivery confirmation is NOT included. Add $1.40 to the final price if you would like delivery confirmation.
**You will receive new, never used o-rings, the picture of them installed is just for show.
***Multiple sets available.
****Tail Stiffening applies to 130X only
Sign up now
to remove ads between posts
Jan 07, 2013, 06:05 PM
Trader Rating: 9
Registered User
PM sent for the 130X kit.
Jan 07, 2013, 06:49 PM
Trader Rating: 4
Registered User
do u have one for the msrx
Jan 07, 2013, 10:29 PM
Trader Rating: 62
Registered User
fairplane's Avatar
PM sent for 1 of each- 3 kits total- and payment sent!
Last edited by fairplane; Jan 07, 2013 at 10:36 PM.
Jan 07, 2013, 11:34 PM
Trader Rating: 111
Registered User
SYMAWD's Avatar
Quote:
Originally Posted by fairplane
PM sent for 1 of each- 3 kits total- and payment sent!
Got it
Jan 08, 2013, 11:31 AM
Trader Rating: 12
God is Good
TMAC4123's Avatar
Quote:
Originally Posted by SYMAWD
Got it
Just got mine in the mail today! Thanks again! What part of the nano should i put them on?
Jan 08, 2013, 11:35 AM
Trader Rating: 111
Registered User
SYMAWD's Avatar
Quote:
Originally Posted by TMAC4123
Just got mine in the mail today! Thanks again! What part of the nano should i put them on?
Remove any o-rings that may already be on your nano and then install in the same places as this picture:
Jan 08, 2013, 11:36 AM
Trader Rating: 111
Registered User
SYMAWD's Avatar
If you have paid, your order has been shipped. Still have more available.
Jan 08, 2013, 11:36 AM
Trader Rating: 77
Registered User
Same place as on the mcpx, all 5 swash plate posts.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
blade MCP X for Nano CP X cale10 Non R/C Items (FS/W) 4 Jan 06, 2013 05:22 PM
Sold Nano CP X Head Stiffening Kit SYMAWD Aircraft - Electric - Helis (FS/W) 3 Jan 03, 2013 08:47 PM
Sold mCP X Head Stiffening Kit (2 Left) SYMAWD Aircraft - Electric - Helis (FS/W) 3 Jul 17, 2012 02:26 AM
Sold mCP X Head Stiffening Kit SYMAWD Aircraft - Electric - Helis (FS/W) 7 Jul 15, 2012 12:39 AM
Sold mCP X Head Stiffening Kit SYMAWD Aircraft - Electric - Helis (FS/W) 1 Jul 07, 2012 07:22 AM