Naza gimbal setup problems - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 05, 2013, 03:20 PM
Registered User

Naza gimbal setup problems

I am having a problem getting my GoPro Aeroxcraft two axis gimbal setup. I am
new to setting up gimbal, so am having a time getting it working. The tilt servo
works, but is tilted down around 10 degrees. The roll servo always tilts all the way
down on one side. I would rather have the camera level. Anyone be willing to help
me out. I am running the gimbal on DJI 550. Thanks
Sign up now
to remove ads between posts
Jan 07, 2013, 12:12 PM
Registered User

no responses-- is my post that elementary or no one willing to help

I know my post is elementary to those who know all about this kind of
setup. I do know how to open naza assistant and enter settings, but still doesn't
work. Hoping someone would help me with this problem. Thanks.
Last edited by crdodd; Jan 07, 2013 at 12:13 PM. Reason: misspelled word
Jan 07, 2013, 12:21 PM
Registered User
tstrike's Avatar
I'll try and help, but no guarantee's. First, free up all your servos by removing the gopro box from the pitch servo and removing the servo horn from the roll servo. Then give the gimbal power, this gets the servos to find their center meaning now you should have 45 degress up and 45 degrees down. Reattach everything being careful to not move the servos positions. This should give you a decent starting point. Good luck.
Jan 07, 2013, 01:16 PM
Registered User

Thanks! for your concern

Thanks for your reply. I know I am lost concerning gimbals and servos. Your
information is certainly a starting point. Again thanks.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Need help with F550 NAZA gimbal setup chipwich Multirotor Drone Talk 21 Sep 23, 2013 10:01 AM
Discussion DJI F550 Setup, Gimbal(Gopro3 black) naza+GPS ( first build ) ActionHeroWT Multirotor Drone Talk 0 Nov 25, 2012 10:38 AM
Discussion Naza Gimbal Gain Setup Primer? birdseyefilms Multirotor Drone Electronics 0 Oct 31, 2012 08:13 AM
Question SETUP Turnigy 9x with ER9X setup for NAZA? Medicineman76 Radios 0 Feb 26, 2012 09:51 PM
Mini-HowTo Optimizing Gimbal Setup for Filming - CineStar Gimbal tabbytabb Multirotor Drone Talk 2 Nov 29, 2011 02:00 PM