Feb 02, 2013, 06:54 PM
Registered User
Quote:
Originally Posted by windrnone View Post
+1 was hoping we had the ability to turn the gyro on and off while maintaining full throws...............
I haven't messed with the gains yet since my Visionaire seems to fly perfect with the AS3X gains factory settings. Are you saying that if we do put the gains down to 0 which is our way of turning the AS3X off, then we won't have full throws???
Sign up now
to remove ads between posts
Feb 02, 2013, 07:02 PM
lownslow
windrnone's Avatar
Quote:
Originally Posted by Cloud_Buster View Post
I haven't messed with the gains yet since my Visionaire seems to fly perfect with the AS3X gains factory settings. Are you saying that if we do put the gains down to 0 which is our way of turning the AS3X off, then we won't have full throws???
OOOPS sorrry for the confusion on my part, ......I agree 100% the AS3X works perfectly in the Visionaire and I too have no need to change it. Turboparker was initially referring to putting the AR635 in other aircraft, that said if we put it in other aircraft we lose the ability to turn the gyro on and off while maintaining high throws......something to think about depending on which aircraft it goes in.....if you choose to turn the gain all the way down you must also choose wether you do it on the high throw or low throw or both....
EDIT: refer to post 817.....
EDIT: turning the gain to zero should not affect throws
Last edited by windrnone; Feb 02, 2013 at 07:36 PM.
Feb 02, 2013, 07:35 PM
wjs
wjs
William
Quote:
Originally Posted by Cloud_Buster View Post
I haven't messed with the gains yet since my Visionaire seems to fly perfect with the AS3X gains factory settings. Are you saying that if we do put the gains down to 0 which is our way of turning the AS3X off, then we won't have full throws???
It would have been nice to have a switch way to turn off as3x via tx. I will never remember all that stuff.
Feb 02, 2013, 10:39 PM
VP of Policy & Legal at DJI
bmschulman's Avatar
The Visionaire looks like it would make a great night flyer. Anyone planning to load it up with LEDs and see how it handles the extra weight?
Feb 02, 2013, 10:50 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by bmschulman View Post
The Visionaire looks like it would make a great night flyer. Anyone planning to load it up with LEDs and see how it handles the extra weight?
Nice! Never thought of that!!
Feb 02, 2013, 11:53 PM
Registered User
Maiden went well today, albeit COLD. Ran 2 packs through it at a local mall parking lot in the morning. Too cold to exercise it much, but there was already a good breeze and it handled it very well. Definitely going to enjoy flying this plane!

Tom
Feb 03, 2013, 12:14 AM
wjs
wjs
William
Quote:
Originally Posted by bmschulman View Post
The Visionaire looks like it would make a great night flyer. Anyone planning to load it up with LEDs and see how it handles the extra weight?
At $300 clams, one would have to have some stones to fly it at night. I will stick with the Vapor for night flying :-)
Feb 03, 2013, 03:51 AM
Registered User
lovetofly25's Avatar
Love, it, Love it, LOVE IT!!!!!
Last edited by lovetofly25; Feb 03, 2013 at 03:57 AM.
Feb 03, 2013, 05:24 AM
lownslow
windrnone's Avatar
10 PAKS yesterday in 10 mph of wind ...windsurfing, WHAT A BLAST!!!!:
Last edited by windrnone; Feb 03, 2013 at 05:30 AM.
Feb 03, 2013, 05:27 AM
lownslow
windrnone's Avatar
Quote:
Originally Posted by bmschulman View Post
The Visionaire looks like it would make a great night flyer. Anyone planning to load it up with LEDs and see how it handles the extra weight?
It would make an excellent night flyer, very floaty, it would handle it fine, this thing lands so sweet, right at my feet every time
Feb 03, 2013, 07:50 AM
Registered User
Mr Oz's Avatar
Quote:
Originally Posted by windrnone View Post
It would make an excellent night flyer, very floaty, it would handle it fine, this thing lands so sweet, right at my feet every time
So it harriers in easily? I just bought one also, but have not maidened yet. 13 degrees here and snowing but maybe this afternoon.
Feb 03, 2013, 08:01 AM
J. Titors gr8 grandson...
Sonofagun's Avatar
Stock 12 x 4 = 38.5 amps. Apc 11 x 4.7 slo flyer = 53 amps ...
Feb 03, 2013, 09:30 AM
lownslow
windrnone's Avatar
Quote:
Originally Posted by Mr Oz View Post
So it harriers in easily? I just bought one also, but have not maidened yet. 13 degrees here and snowing but maybe this afternoon.
Put a 4X8 sheet of plywood out there and I will drop it on 9/10 times, BTW - I CANNOT FLY 3D !!!!!!! LOL,...........this thing is a hoot.........cold here today 65 degrees.....
Feb 03, 2013, 11:19 AM
Team Aztech Aeromodels!
zmonster97's Avatar
I may maiden mine today!
Feb 03, 2013, 11:26 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by zmonster97 View Post
I may maiden mine today!
Take your camera!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Parkzone's New Habu 2 EDF ChuckTseeker Foamy EDFs 5037 Oct 31, 2016 08:05 PM
For Sale New Parkzone S.E.5a w/ AR600 Rx - LPU Kevinfred Aircraft - Electric - Airplanes (FS/W) 1 Jul 12, 2012 12:26 AM
Sold New Parkzone S.E.5a w/ AR600 Rx - LPU Kevinfred Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Jun 23, 2012 09:10 AM