Thread Tools
Jan 27, 2013, 08:38 PM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by nickelbn1
I have several 1600mah 3s batteries, 40c. think they would work in this plane?
They might be a little low. They would probably work fine though. You'll just get a little shorter flight times.
Sign up now
to remove ads between posts
Jan 27, 2013, 08:54 PM
Hey... watch this...
Mmarshall's Avatar
Probably very short flight times, I am getting around 5:30 with 2200's and that leaves around 20% left in them when I land.

1600 you might get as low as 3 mins??
Jan 27, 2013, 09:12 PM
Registered User
Quote:
Originally Posted by Left Coast DJ
That's some very sweet flying!

Any opinions on this as a first 3D plane? Trying to decide between a flat foamie (Crack Yak for appx $150) vs. the VisionAire?
Not a hijack attempt here but as long as you asked...you want a truly religious experience? One that will have you chanting & burning incense after each flight?

3 words, my friend, 3 words: Crack Yak Lite ...ooooommmm....oooommmm

<Ahem> But this Visionaire - - Yep!!! I'm experienced 3D and after becoming an AS3X Acolyte on the Beast 3D, 130X, and the HyperTaxi, count me in, baby!!!
Jan 27, 2013, 09:16 PM
Registered User
Quote:
Originally Posted by Mmarshall
I can honestly say I fly this better then I do my 3DHS 51 Slick.
Now, the above sentence, Sir, is one of the scarier ones I've seen in quite some time...!!.
Jan 27, 2013, 09:25 PM
wjs
wjs
William
[QUOTE=poiyt;23952925]Not a hijack attempt here but as long as you
3 words, my friend, 3 words: Crack Yak Lite ...ooooommmm....oooommmm
QUOTE]

From Twisted ?
Jan 27, 2013, 09:30 PM
Registered User
[QUOTE=wjs;23953058]
Quote:
Originally Posted by poiyt
Not a hijack attempt here but as long as you
3 words, my friend, 3 words: Crack Yak Lite ...ooooommmm....oooommmm
QUOTE]
From Twisted ?
Yep, mine should be arriving this week and built on Friday.
Jan 27, 2013, 11:14 PM
Beast 60E Maniac
SLK Count's Avatar
..sad to read here problems with the clevis - I also assumed some post ago for weak clevis
-
Weather forecast is bad and I think my Visionaire would be here tomorrow- I will check the clevis and if tey are the same at my Stryker, I have to mod them with a small steal pin instead of the weak (and horrible) plastic pin.
For example...
Jan 28, 2013, 05:12 AM
Can't fly 3D for toffee ...
GoAround's Avatar
Quote:
Originally Posted by SLK Count
..sad to read here problems with the clevis - I also assumed some post ago for weak clevis
-
Weather forecast is bad and I think my Visionaire would be here tomorrow- I will check the clevis and if they are the same at my Stryker, I have to mod them with a small steal pin instead of the weak (and horrible) plastic pin.
For example...
That is genius. I am expecting mine tomorrow as well (and, like you, rubbish weather!).

I have some spare metal rod here so will do likewise, or even add a metal clevis if the one I have fits. I'm mainly keen on the elevator as you can fly with one aileron or no rudder. This assumes they simply come off the clevis .... not jam at the same time
Jan 28, 2013, 05:34 AM
Hey... watch this...
Mmarshall's Avatar
Quote:
Originally Posted by poiyt
Now, the above sentence, Sir, is one of the scarier ones I've seen in quite some time...!!.
It is scary!

I love my slick, nothing beats the looks and the quality but this thing is crazy fun.

I do not see the Visionaire replacing my Slick as my favorite plane at the field but for school yard 3D sessions its a beast.
Jan 28, 2013, 05:51 AM
Registered User
Tomdomification's Avatar
Quote:
Originally Posted by poiyt
Now, the above sentence, Sir, is one of the scarier ones I've seen in quite some time...!!.
Quote:
Originally Posted by Mmarshall
It is scary!

I love my slick, nothing beats the looks and the quality but this thing is crazy fun.

I do not see the Visionaire replacing my Slick as my favorite plane at the field but for school yard 3D sessions its a beast.
I think he was saying that HE flies the Visionaire better, not that IT flies better :-) You would hope so as the Visionaire is a 3D trainer really.

Tom
Jan 28, 2013, 05:59 AM
lownslow
windrnone's Avatar
Quote:
Originally Posted by SLK Count
..sad to read here problems with the clevis - I also assumed some post ago for weak clevis
-
Weather forecast is bad and I think my Visionaire would be here tomorrow- I will check the clevis and if tey are the same at my Stryker, I have to mod them with a small steal pin instead of the weak (and horrible) plastic pin.
For example...
Hey SLK, I did exactly the same mod on my stryker, after she went in the first time due to clevis pulling out of the elevon....

Guys, Ace hardware has brass rod that fits perfectly, easy mod

HH, about time we put better clevis' in the aircraft, they are becoming more powerful and more stressed.....
Jan 28, 2013, 06:03 AM
lownslow
windrnone's Avatar
Quote:
Originally Posted by poiyt
Not a hijack attempt here but as long as you asked...you want a truly religious experience? One that will have you chanting & burning incense after each flight?

3 words, my friend, 3 words: Crack Yak Lite ...ooooommmm....oooommmm

<Ahem> But this Visionaire - - Yep!!! I'm experienced 3D and after becoming an AS3X Acolyte on the Beast 3D, 130X, and the HyperTaxi, count me in, baby!!!
No doubt the Crak Yak has a large following but would it be as much fun in 10 knots of wind, the VA is more about wind resistance???
Jan 28, 2013, 07:37 AM
Registered User
Quote:
Originally Posted by windrnone
No doubt the Crak Yak has a large following but would it be as much fun in 10 knots of wind, the VA is more about wind resistance???
No debating that with you but the Crack Yak can take a full throttle head dive into the ground with little to no damage due to it being EPP. That is the difference, if you are learning to 3D you will crash, with EPP it will bounce and be fine. It being indoor season around here, these will be flown inside for now. I can fly these in front of my house as they are so small floaty and light (little damage to the plane and no damage to my house/car), turn up the rates and they turn into monsters.
Jan 28, 2013, 08:06 AM
Can't fly 3D for toffee ...
GoAround's Avatar
^^ This is why I intend to get a Crack Yak as well as a Visionaire!

Going back to Visionaire equivalents on Phoenix, I have edited a Multiplex Acromaster by putting tip stalling to zero (in the fine tuning section). It now flies, and looks, like I imagine the Visionaire will. I'd be grateful if a Visionaire owner with Phoenix could try this and see if I am correct. I pick it up tomorrow but it may be a while before I can maiden it so I want something relevant to practice on. The edited Shruiken is great but obviously a totally different scale!
Jan 28, 2013, 09:15 AM
Aut Viam Inveniam Aut Faciam
verticalspark's Avatar
Quote:
Originally Posted by windrnone
Hey SLK, I did exactly the same mod on my stryker, after she went in the first time due to clevis pulling out of the elevon....

Guys, Ace hardware has brass rod that fits perfectly, easy mod

HH, about time we put better clevis' in the aircraft, they are becoming more powerful and more stressed.....
I thought everyone did this mod I had the stock clevis break on the radian under very little pressure. Ever since then I always swap them out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Parkzone's New Habu 2 EDF ChuckTseeker Foamy EDFs 5050 Yesterday 11:03 PM
For Sale New Parkzone S.E.5a w/ AR600 Rx - LPU Kevinfred Aircraft - Electric - Airplanes (FS/W) 1 Jul 12, 2012 12:26 AM
Sold New Parkzone S.E.5a w/ AR600 Rx - LPU Kevinfred Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Jun 23, 2012 09:10 AM