Thread Tools
This thread is privately moderated by Keenan smith, who may elect to delete unwanted replies.
Dec 29, 2012, 01:09 AM
was geht , müssen unten kommen
Keenan smith's Avatar
Build Log

40mm EDF F-35A build


Been building this lil bugger whilst waiting for components for my other larger aircraft to dry almost done, it has a 15" wingspan and i packing 40mm EDF thats chucks out 214g of thrust on 3s. **Donated By Nitrocharged of www.nitrocharged.com ** Just waiting for the new AEO rc 40mm 7 bade EDF rotor to arrive until then this lil bugger is on hold, any who i just need to source out a V-tail mixer ** Recieved V-tail mixer, Was Donate by P51P51 From www.wingmanrc.com **

*Update 25/01/2013*

Plane Is now Complete Minus EDF Rotor Which is on its Way! not too long now
To Do list
.Reverse Ailerons
.Fit EDF Cover
.Paint
.Fly (and Film it!)


^ The List is Short!^
K

Thoughts would be appreciated, thanks in advance
Check out my next build: https://www.rcgroups.com/forums/show....php?t=1817892

and Follow me on twitter @raceto1mil
http://the-dreamfactory.webs.com
Last edited by Keenan smith; Jan 26, 2013 at 05:23 PM.
Sign up now
to remove ads between posts
Dec 30, 2012, 11:04 AM
was geht , müssen unten kommen
Keenan smith's Avatar
Had a little spare time and glued all tte top formers, the rudder and installed the rest of the elctronics

Also i used my top-secret depron compound forming technique to make a few important pieces of the Ducting

But im still not sure the esc will have enough cooling in its current position

I will make a video on conpound forming the depron
Dec 30, 2012, 02:08 PM
was geht , müssen unten kommen
Keenan smith's Avatar
40mm EDF F-35A build part one (1 min 4 sec)
Dec 30, 2012, 02:24 PM
Airliner Builder
WAGliderGuy's Avatar
Damn she looks like a sexy little park screamer. In the words of Borat,

very nice, high five (0 min 4 sec)


Nice work K.

Ethan
Dec 30, 2012, 03:08 PM
was geht , müssen unten kommen
Keenan smith's Avatar
Thanks Ethan i'm just waiting on the new rotor from AEO but in the mean time im going to buy a 6 Blade rotor and then change it when the new rotor arrives

Im hoping for speeds in excess of 100mph when i change over to a dons wicked 7000kv with the 7 blade rotor, i should have around 320g of thrust on 4s maybe some day I'll build a 70mm FPV version....


K
Dec 31, 2012, 03:17 PM
was geht , müssen unten kommen
Keenan smith's Avatar
Big thanks to P51P51 from www.wingmanrc.com for providing me with a GWS V-Tail mixer check out his site cos he has loads of.cool stuff

Just did some caclulations and the 40mm edf before it blew up, was drawing 15A on 2s and was pulling 133Watts an on 2s thats gives me 301 Watts/lb so i should be okay for ROG with some lightweight msic wire gears (thats at my predicted weight of 195g)

K
Last edited by Keenan smith; Jan 01, 2013 at 03:15 AM.
Dec 31, 2012, 10:06 PM
was geht , müssen unten kommen
Keenan smith's Avatar
few more calcs says i will have 199Watts on 3s at 451Watts/lb MAN ARE YOU CRAZY !!!!!!!
Jan 01, 2013, 04:15 AM
Up-Out-&-Gone
demondriver's Avatar
K, this is yet again proof that you can start and build and basically finish a project, Being that your F-35 is nearly complete.

I can't wait to see her fly!
Latest blog entry: It's 737 Time!
Jan 01, 2013, 04:34 AM
was geht , müssen unten kommen
Keenan smith's Avatar
Than you Chris...
Im hoping to have this done in a few days and have my airliners done in the coming months

Tis F-35 should fly fast but im still deciding on maidening with gear or not??

K
Jan 01, 2013, 11:49 PM
Up-Out-&-Gone
demondriver's Avatar
Quote:
Originally Posted by Keenan smith View Post
Than you Chris...
Im hoping to have this done in a few days and have my airliners done in the coming months

Tis F-35 should fly fast but im still deciding on maidening with gear or not??

K
Nah make her a belly flopper, gust put some fiberglass tape on her belly.
Latest blog entry: It's 737 Time!
Jan 01, 2013, 11:58 PM
was geht , müssen unten kommen
Keenan smith's Avatar
k... belly flopper it is thought id put gear on her cos i have a tarmac runway and so ic an do touch n goes...but ill have her as a bely flopper first..
Jan 02, 2013, 12:52 AM
was geht , müssen unten kommen
Keenan smith's Avatar
Checking the fit of the top skin panel for the F-35 all looks good but it will need some trimming at the rear

Todays trip to the local hobby store to get some more foam, music wire wheels and some other misc items...


K
Jan 03, 2013, 01:44 PM
Up-Out-&-Gone
demondriver's Avatar
Now I'm impressed! Sweet!

Good work K!
Latest blog entry: It's 737 Time!
Jan 03, 2013, 08:12 PM
was geht , müssen unten kommen
Keenan smith's Avatar
Thanks dd, but i can't really progress till i get a ne rotor fo this fan and whats really annoying is that i have cash in hand but the only placeni can get the rotor is online

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Build Thead: F-16 EDF-FPV-ForceFly build sykmethodz FPV Talk 154 May 10, 2013 09:45 PM
Build Log edf contest-F-88 Sabre Canard 40mm MustangAce17 Foamy EDFs 8 Jan 11, 2013 02:38 PM
Discussion 40mm EDF F-22 from toprchobby Joe 1320 Micro EDF Jets and Power Systems 13 Jul 13, 2012 08:12 PM
For Sale REDUCED: Stealth-E 40mm EDF kit with 40mm fan/brushless motor and ESC The Don Aircraft - Electric - Jets (FS/W) 1 Mar 14, 2012 10:23 PM
Build Log F-35A EDF 40 - Scratch build G-force237 Foamy EDFs 39 Jul 09, 2006 10:51 AM