This AR.Drone has been modified and now has a 2.4gHz transmitter and receiver installed. You can, of course, unplug it and use your iOS or Android device to fly, but you don't have to! You also get two custom hulls. The Yellow and the Carbon Fiber wrapped black hull. The yellow hull is pre-wired and has a 9 LED spotlight installed under the nose.

I've made many modifications to this AR.Drone including Teflon coated sealed bearings, gear protectors, drone feet, balanced the blades, etc.

I am also including the stock battery as well as two additional 1350mah batteries.

You also get an extra set of blades.

I'm including the original charger for the stock battery, but you will need a charger that accepts balance ports to charge the additional batteries.

This DOES NOT include the original indoor hull. You only get two custom outdoor hulls.

I will include all instructions for both the AR.Drone and the 2.4gHz TX/RX.

Value: $600+
Batteries: $18 x 2 = $36
Teflon Bearings: $15
Gear Protection: $20
9 LED Spotlight: $15
Blades: $15
Die-Cut Decals: $25
Drone Feet: $25
Carbon Hull: $60
Yellow Hull: $45
MacGyver Mod: $150
AR.Drone: $200

Please see my video below...this is the ACTUAL DRONE you are buying!!

AR.Drone 2.0 Modifications and Customizations - Part 2 (7 min 33 sec)

Remember, you're getting ONE AR.Drone 2.0 with TWO custom hulls!

Looking for $450, but I will entertain other offers. No trades.

PM sent w/?'s

Answered