Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 09, 2013, 12:34 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by Urufu_Shinjiro View Post
Would it be a better idea to just go with the batteries it comes with until the spare 25C's are in and then order extras?
Wait until we get the ones that are coming as they could be better or worse than the stock 25C as they are being custom-made.

The Mini Pet lipos are fine for casual flying and longer flight times.
RCG Plus Member
Sign up now
to remove ads between posts
Old Jan 09, 2013, 12:35 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by stonecutter View Post
Don't have an answer for the apparent voltage difference. But I think swapping one pair of booms diagonally would accomplish what you want, wouldn't it? (Assuming swapping booms is easier than soldering led's.)
You still have to solder unfortunately.
RCG Plus Member
Old Jan 09, 2013, 12:44 PM
jesolins is offline
Find More Posts by jesolins
Tri-Quad-Hexa-Octo-copters!!

WLToys V202 LED and prop orientation swapping 101


Gents,
KISS(Keep It Simple Smartone) I know you like to solder as much as I do If your goal here is to put the green LEDs on the front and blue on the back, here is an easy solution:

1. Swap the M2 and M4 props so the green props are on the green LEDs.
2. Swap the M1 and M3 props for the same reason.
3. Remove the flight controller board and rotate it 180 degrees and replace.
4. Swap the M1 and M3 connectors.
5. Swap the M2 and M4 connectors.

Note: I mark the black motor wires with silver marker 0-3 dots to keep track of their original locations. If you mix them up then just plug them in to any socket one at a time and apply a bit of power to source the correct motor for the plug...easy

Also note that both LED sockets provide lipo voltage. Both are switched with the top right button on the Tx. The resistors for the LEDs are in the wiring.

...and yes, like a freshly washed car, the V202 flies better this way

Photo attached.
Cheers,
Jim
Quadrocopter and Tricopter Info Mega Link Index

Quote:
Originally Posted by stonecutter View Post
Don't have an answer for the apparent voltage difference. But I think swapping one pair of booms diagonally would accomplish what you want, wouldn't it? (Assuming swapping booms is easier than soldering led's.)
Last edited by jesolins; Jan 09, 2013 at 12:54 PM.
Old Jan 09, 2013, 01:02 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
That's good Jim, now you just need to modify the instructions if BD wants green on left and blue on right (or vice versa)
RCG Plus Member
Old Jan 09, 2013, 01:12 PM
RCCrashTestDummy is offline
Find More Posts by RCCrashTestDummy
Finding Creative Ways To Crash
RCCrashTestDummy's Avatar
Quote:
Originally Posted by massiveoverkill View Post
url]http://www.massiverc.com/prestashop/44-prop-guard-stock.html[/url]
lmfao!
Old Jan 09, 2013, 01:23 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by RCCrashTestDummy View Post
lmfao!
I don't think a lot of people got it or thought is was funny
RCG Plus Member
Old Jan 09, 2013, 01:27 PM
stonecutter is offline
Find More Posts by stonecutter
Sir Crashalot
stonecutter's Avatar
Quote:
Originally Posted by MassiveOverkill View Post
I don't think a lot of people got it or thought is was funny
But seriously you should include a set of them free for people who ask for it. In place of (or in addition to) the candy.
Old Jan 09, 2013, 01:36 PM
stonecutter is offline
Find More Posts by stonecutter
Sir Crashalot
stonecutter's Avatar
I wanted to try the mini pet prop switch; and while I was at it, put on the MP canopy as well. Result is one nimble bee. Reminds me of a 914 ("poor man's Porsche") I once owned, not lightning fast, but man it handles like a dream.

WL Toys v202 with Mini Pet props and canopy (5 min 11 sec)
Old Jan 09, 2013, 01:38 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by stonecutter View Post
But seriously you should include a set of them free for people who ask for it. In place of (or in addition to) the candy.
But what will the quads live off of during their journey to their new owners?

We're trying to find a source of the Lady Bird guards or something similar. If I had the tooling to cut them consistently to size, it would be viable. I've gone to crafts stores looking for plastic beads that will do the job. There's something already out there that will work perfectly (without cutting), we just have to find it.
RCG Plus Member
Old Jan 09, 2013, 02:42 PM
Urufu_Shinjiro is offline
Find More Posts by Urufu_Shinjiro
Registered User
Um, having an issue ordering MO, set up an account and such, and got to the last phase where I select shipping method and agree to terms, then click next and it just sits there trying to open the page.....not timing out though for some reason, just sitting there trying to load....
Old Jan 09, 2013, 03:02 PM
UniversalRC is offline
Find More Posts by UniversalRC
UniversalRC's Avatar
Quote:
Originally Posted by MassiveOverkill View Post
I don't think a lot of people got it or thought is was funny
Hey I'm still saving up my spare change every day after work. I'll have enough by 2014

MO you got my MP props here too fast, I have not had time to cut motor guards. No TV for me tonight
Site Sponsor
Old Jan 09, 2013, 03:17 PM
stonecutter is offline
Find More Posts by stonecutter
Sir Crashalot
stonecutter's Avatar
Quote:
Originally Posted by Urufu_Shinjiro View Post
Um, having an issue ordering MO, set up an account and such, and got to the last phase where I select shipping method and agree to terms, then click next and it just sits there trying to open the page.....not timing out though for some reason, just sitting there trying to load....
Could be a firewall issue, I cannot completely load store pages at work, but loads fine at home.
Old Jan 09, 2013, 03:39 PM
MassiveOverkill is offline
Find More Posts by MassiveOverkill
Registered User
MassiveOverkill's Avatar
Quote:
Originally Posted by Urufu_Shinjiro View Post
Um, having an issue ordering MO, set up an account and such, and got to the last phase where I select shipping method and agree to terms, then click next and it just sits there trying to open the page.....not timing out though for some reason, just sitting there trying to load....
Hey bud, we sent an order out but don't know if it was you. Can you PM me your real name?

Quote:
Originally Posted by UniversalRC View Post
Hey I'm still saving up my spare change every day after work. I'll have enough by 2014

MO you got my MP props here too fast, I have not had time to cut motor guards. No TV for me tonight
I'm waiting for someone to actually add it to their cart.
RCG Plus Member
Old Jan 09, 2013, 03:44 PM
cyberbillp is offline
Find More Posts by cyberbillp
Registered User
cyberbillp's Avatar

Prop guards


Quote:
Originally Posted by MassiveOverkill View Post
But what will the quads live off of during their journey to their new owners?

We're trying to find a source of the Lady Bird guards or something similar. If I had the tooling to cut them consistently to size, it would be viable. I've gone to crafts stores looking for plastic beads that will do the job. There's something already out there that will work perfectly (without cutting), we just have to find it.
Lowes stocks #6 and #8 nylon washers. I grabbed a bunch of the #6 with the intent of putting them on the H36, but the inner diameter is just a touch to small. Next time I go, I'm getting some #8's. I think they will work.

So for the v202, I suspect you can google for some #2 or #0 flat nylon washers and buy a bag of 1000 for $20 or something. I imagine 2 or 3 stacked would be perfect.
Old Jan 09, 2013, 04:09 PM
BD Murdock is offline
Find More Posts by BD Murdock
Quad guys are 4x the fun :)
BD Murdock's Avatar
NAV light set-up is red on port side front & back green on starboard front & back looking at vehicle from behind. Theoretically I could still use the green LED's, and if I knew thier values could match reds to them. There's no way to know though without a data sheet on them.

It's just me...since I started fiddling with things that fly I've taught myself orientation based on NAV lights, port & starboard red and green left and right. I'm just set in my ways so I'll figure it out one way or another even if I have to build another set like the one on my LB.

I sure wouldn't want to have to replace a boom though...a wiring / re-wiring de-soldering / soldering nightmare.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion WL Toys V959/V202/ SH 6047 Scorpion dankar04 Mini Multirotors 10 Apr 25, 2015 02:22 AM
Discussion Micro Quad V202 RTF for 26.68$ ratonxi Hot Online Deals 57 Jan 24, 2013 12:23 PM
Discussion WL Toys V202 "50% off" ??? stifa Mini Multirotors 3 Dec 08, 2012 10:50 AM
Discussion V202, which canopy do you prefer? MassiveOverkill Mini Multirotors 16 Dec 07, 2012 02:29 PM
Discussion Soodohobby 2.4G Mini 6 aixs Gyro Scorpion Quadcopter WL V202 Quadcopter MQ80 Multirotor Talk 0 Nov 26, 2012 11:01 PM