SH 6047 Scorpion - Page 4 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 27, 2013, 03:56 PM
Registered User
asanovrus's Avatar
Quote:
Originally Posted by jesolins
Hi A,
There is a blurry photo of the Scorpion fcb on Banggood: http://www.banggood.com/Wholesale-Sh...5-p-63260.html
Cheers,
Jim
Quadrocopter and Tricopter Info Mega Link Index
thanks for link. so banggood has is a terrible photo that even front camera of my nameless chinese tablet would shoot better? As far as I can see there are only connectors for motors, power cables soldered to board
Sign up now
to remove ads between posts
Feb 01, 2013, 12:39 PM
quad addict

radio mode


Hi!

I don't know yet the mode of the radio sold on bangood

I drive mode 2 and the scorpion binds with a proprietary protocol so if I get the wrong mode I miss all

Can someone tell me if they sell only mode 2 or wich mode arrived at home?

Thanks to all
Feb 01, 2013, 12:47 PM
Flyin' Ryan
theimacman's Avatar
Mine was Mode 2. Throttle/rudder on left stick. Ailerons/Elevator on right stick.
Feb 01, 2013, 01:59 PM
Registered User
any other issues with this copter, other than the loose prop? anybody else have a stuck controller like theimacman ?
Feb 01, 2013, 03:11 PM
Flyin' Ryan
theimacman's Avatar
Quote:
Originally Posted by username2620
any other issues with this copter, other than the loose prop? anybody else have a stuck controller like theimacman ?
I've been enjoying it quite a bit, and haven't had any other issues. I put a new prop from one of my other micro quads on it and haven't had an issue since.

I checked my transmitter for my Ares Ethos, which has the same transmitter, and it sticks too when I give full up/left input.

I am going to open the Scorpion Tx this weekend and see if I can fix it. It really isn't an issue though, unless you like to let your fingers off the stick and let it snap back to center.
Feb 02, 2013, 06:54 AM
Registered User
asanovrus's Avatar
Quote:
Originally Posted by theimacman
They are brushed motors. And, they have spare parts on Banggood.com.

I may have a chance to take it outside in the wind this weekend. I'll film it, if possible. I can also see if it can lift my keychain camera. I have a feeling it might, since it has 6 motors, but then again, it's pretty heavy to start with, so the motors may already be doing all they can just to lift the body.
Hi. You didn't update so I guess you couldn't fly it outdores so far. It seems that because of too much competition this machine is not very popular. My WL v939 just arrived and flies terribly, unpredictably. I can't hover it at all, only swinging when I try to return it then can't stop and compensate it back. I need something that can hover with no move. The only thing I'm concerned about this 3copter is that it might be bad in wind as it has big surface. My v959 and v929 are on their way from china, hope they will be better then v939. I can't find detailed pictures of this tricopter to find if I could cut off some pieces to reduce wight.
Feb 02, 2013, 10:42 AM
Registered User
Quote:
Originally Posted by theimacman
I've been enjoying it quite a bit, and haven't had any other issues. I put a new prop from one of my other micro quads on it and haven't had an issue since.

I checked my transmitter for my Ares Ethos, which has the same transmitter, and it sticks too when I give full up/left input.

I am going to open the Scorpion Tx this weekend and see if I can fix it. It really isn't an issue though, unless you like to let your fingers off the stick and let it snap back to center.
thanks, I think I'm going to order one... I've got one more question before I pull the trigger... Have you found a source for replacement bottom props? Will the walkera scorpion props fit?
Feb 02, 2013, 01:42 PM
Flyin' Ryan
theimacman's Avatar
Quote:
Originally Posted by asanovrus
Hi. You didn't update so I guess you couldn't fly it outdores so far.
That is correct. The weather has turned for the worse here and I have not been able to fly outside yet.


Quote:
Originally Posted by username2620
thanks, I think I'm going to order one... I've got one more question before I pull the trigger... Have you found a source for replacement bottom props? Will the walkera scorpion props fit?
No, actually, I have not found replacement bottom props. That is definitely a major drawback. The Walkera Scorpion blades would work, but it looks like they don't sell bottom blades for that either. You have to use top blades and drill a hole through the top, which is not exactly something everyone has the tools to do.
Feb 02, 2013, 06:32 PM
Registered User
FYI: I bought a pack of Walkera scorpion props on-sale for my Ladybird awhiles back and tried 'em, to find that indeed a few of them are upside-down.. doh!
bummed... I thought 3 props are a waste now, but punching the shaft hole thru the prop would allow me to used them "right-side-up"

behold the pitch.
Feb 02, 2013, 06:34 PM
Registered User
double post
Feb 03, 2013, 12:17 PM
Registered User
Quote:
Originally Posted by vpsporb
FYI: I bought a pack of Walkera scorpion props on-sale for my Ladybird awhiles back and tried 'em, to find that indeed a few of them are upside-down.. doh!
bummed... I thought 3 props are a waste now, but punching the shaft hole thru the prop would allow me to used them "right-side-up"

behold the pitch.
cool, so it looks like the walkera props will do the trick, ordering a 6047 now..

*edit* found some scorpion props at moonhobby for $3.69 (USD) + free shipping... never ordered from moonhobby before, so I hope everything goes smooth.. All the other shops wanted too much for shipping... I can't justify spending $7 shipping for a $3 part...
Last edited by username2620; Feb 04, 2013 at 12:18 PM.
Feb 18, 2013, 05:27 PM
Registered User
Just double checking that this isnt 9x compatible?
Feb 18, 2013, 05:34 PM
quad addict
Quote:
Originally Posted by edk83
Just double checking that this isnt 9x compatible?
I'm afraid ....

it is not compatible:
Feb 18, 2013, 07:08 PM
Flyin' Ryan
theimacman's Avatar
Quote:
Originally Posted by username2620
*edit* found some scorpion props at moonhobby for $3.69 (USD) + free shipping... never ordered from moonhobby before, so I hope everything goes smooth.. All the other shops wanted too much for shipping... I can't justify spending $7 shipping for a $3 part...
Nice! Please post back with your experience with that site.
Feb 18, 2013, 07:31 PM
Registered User
Is Moon Hobby in US?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion WL Toys V959/V202/ SH 6047 Scorpion dankar04 Mini Multirotor Drones 10 Apr 25, 2015 02:22 AM
Sold REDUCED: Savox SH-1250MG x 3, plus one Savox SH-1290MG servo w Fedex $149 shipping HeliPown Aircraft - General - Radio Equipment (FS/W) 2 Sep 12, 2012 10:34 PM
Sold REDUCED: Savox SH-1250MG x 3, plus one Savox SH-1290MG servo w Fedex $149 shipping HeliPown Aircraft - Electric - Helis (FS/W) 2 Sep 12, 2012 10:33 PM
For Sale Dynam Vortex 4-CH Coax RTF Set - Used ($40+sh) + New ($60+sh) vimb Aircraft - Electric - Helis (FS/W) 3 Aug 28, 2008 07:34 AM
Wanted Aveox SH-48, SH-98, H-160, H-160-RC, H-360!!! lutach Aircraft - Electric - Power Systems (FS/W) 1 Dec 11, 2006 12:36 AM