Can you recommend a 25" span ARF/RTF Pattern ship? - RC Groups
Thread Tools
Dec 16, 2012, 02:30 PM
Registered User

Can you recommend a 25" span ARF/RTF Pattern ship?


I have a small public park/field near me. It would be very convenient...if I could find something fun to fly there I could get a flight before/after work.

I used to fly a Kaos 10 years was great w/unlimited vertical and it would knife edge forever. I used to knife-edge that plane for a full tank of gas, 15-20 min.

Can you recommend a foamy Pattern ship that would feel like the Kaos (or even more precise), knife edge, with lots of vertical? I'd prefer a plug-and-play deal so I could just supply Rx and batteries but I have no objection to an ARF as long as it's light (want that vertical ability!!). Also, I hate doing hinges...must be factory hinged.

I have tried the little 15" span Sukohi and I think that's just too small...I can't seem to get it to fly. I'd like something in the 22-30" span range. It could be foamy(preferred) or balsa/ultracoat.

Thanks for your help!!

Last edited by sothpaw; Dec 16, 2012 at 02:36 PM.
Sign up now
to remove ads between posts
Dec 19, 2012, 01:44 PM
Registered User
If you're willing to build your own from scratch, go to the Indoor and Micro forum and search for my "140 Percent UMX Extra 300 ** NOW WITH VIDEO ** " thread.

This plane retains all of the great flying characteristics of the stock UMX Extra 300, but I enlarged the dimensions to 22 inch WS, which lowered the flying speed to about 80% of the original. Knife edge, inside and outside loops, etc. are easy. However, snap rolls are a bit too trying for a depron/mylar structure - so stick to the slower Pattern-type maneuvers and you'll be happy.

My original plane was converted to use an AS3X version of the ar6400, but a strong gust of wind blasted it into a tree. All that could be salvaged was the equipment, so after the holidays I am going to build a new airframe for it. I will post a build thread over there and a link to it here.

Another suggestion is the Vision3D by [URL=""][/URL it flies as slow as Alexi Lantsov's or Donatas' planes.
Dec 19, 2012, 01:52 PM
Registered User
wayfaringdreamer's Avatar
Not really a pattern plane but the crack yak mini (24 inch wingspan, hinged already) might be fun for you:
Dec 19, 2012, 09:20 PM
Registered User
If you are going to fly out doors, a depron plane will get beat up pretty quick. You will get a lot more flying out of an Epp foamy.
Jan 08, 2013, 12:04 AM
Registered User
Thanks guys! I'm going to try Horizon's Edge 540 QQQ and see how that goes.
It's about the right wing loading for the small areas I have that are soooo convenient. I'll get a larger electric pattern plane for my club field.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! can you recommend a rc course for electric parts HAWKEYE44444 Electric Plane Talk 2 Apr 05, 2012 11:01 PM
Discussion Seeking Larger Foam J3 - Can You Recommend Any? itsme2 Electric Plane Talk 1 Mar 16, 2012 09:12 AM
Discussion Can you recommend a Slow Stick Setup? andrewho83 Beginner Training Area (Aircraft-Electric) 23 Mar 07, 2012 06:32 PM
Sold Groovy 50 arf pattern RTF $225 shipped! kmp647 Aircraft - Electric - Airplanes (FS/W) 4 May 06, 2008 05:20 AM
For Sale OK EZ Models ARF . Calm 25 Pattern ship mavdriver Aircraft - Fuel - Airplanes (FS/W) 4 Apr 16, 2008 09:38 AM