Thread Tools
Dec 14, 2012, 01:33 PM
Fly CPA
patternpilot1's Avatar
Discussion

My version of RAVEN


Hi all,

Been working on a project for a customer and decided to share with you.. Needed a platform to carry a payload ( can't say & yes it is legal ) but any how we did a bunch of different designs and kept coming back to a RAVEN clone. So some plugs where made and molds and the glass work has been done. The wing has been cut out of 3/4 pound foam and sheeted with 1/32 sheeting. I will show photo's on that soon.. here are some quick pics of the fiberglass parts and boom and tail surface.

what you think ?

S.
Sign up now
to remove ads between posts
Dec 14, 2012, 04:16 PM
Fly CPA
patternpilot1's Avatar

kit


Is there any interest in this as a kit?

Glass parts and foam wings ( unsheeted )

Or a deluxe version with sheeted wings..

Still working out some details.. Hope to fly it soon as I get caught up on other composite orders.

s.
Dec 15, 2012, 07:47 AM
Fly CPA
patternpilot1's Avatar
This version has a removable nose with a slid in battery / payload tray. The camera can be mounted in the nose or out on the wing where the 2.4 ghz 1 watt TX will be.

Hope to have some wing work done today and post some more photos.
Dec 15, 2012, 04:53 PM
Fly CPA
patternpilot1's Avatar
Okay.... break time

The wing is done for the most part some sanding and put the hard points in for the bolts and a few other little things...that will be later tonight...

But here is what she is looking like at this point ...
Dec 15, 2012, 04:56 PM
Fly CPA
patternpilot1's Avatar
you will see in this next set of photos that it is a 2 piece wing.. plug in center.
tips will be glued on.
Dec 15, 2012, 04:57 PM
Fly CPA
patternpilot1's Avatar
more........
Dec 15, 2012, 07:11 PM
Fly CPA
patternpilot1's Avatar
oaky..dinner done....

put the hard points in the wing...

1/2 inch hardwood for 1/4x20 nylon 2 inch screw..

Used 1/2 brass tubing with a slight bevel in drill press to cut hole in wing...

did a quick weight check, and i did not use my good 4# contest wood, but 14.6 oz for total wing..
Dec 16, 2012, 08:46 PM
ProBro Spaz
spastic's Avatar
looks good those wings turned out great
Dec 17, 2012, 02:35 AM
Registered User
I`m interested to buy at least one of your planes.
Would be the deluxe version...
PM me when you are ready
Shipped to Norway
Dec 17, 2012, 07:35 AM
Fly CPA
patternpilot1's Avatar
Thank you for the comment on the wings...

Kaspers1 I will keep you up to date.

I hope to get some more building done today.
Dec 19, 2012, 01:54 PM
Fly CPA
patternpilot1's Avatar
well I got tossed under the bus....had to do family stuff.. anyhow did get the other hard points in the wing and did some design work for a production version of the prototype.

should be in the shop again soon..

s.
Dec 20, 2012, 04:15 PM
Fly CPA
patternpilot1's Avatar
more
Dec 26, 2012, 11:59 AM
Fly CPA
patternpilot1's Avatar
Well got the wing panels glued on to the each center section of the wing and will do a weight check next... Been working on some payload mounts specific for the project.
Dec 27, 2012, 08:42 PM
Fly CPA
patternpilot1's Avatar
some more photos...

Shows the tube mount..

wing with tip glued on and weight of wing panel, they came out almost the same.

total wing weight , wing, wing tube.. I'm sure I can get this lighter with a better selection of wood.. I was out of my contest grade 1/32 wood.

I did get the mount for the payload done last night and will show that later.

Next working on the servo mount with the push rods to go down thru the boom.

cheers
Last edited by patternpilot1; Dec 27, 2012 at 08:43 PM. Reason: info
Dec 31, 2012, 10:02 AM
Fly CPA
patternpilot1's Avatar
Hope to have some more work today and tonight... The payload try for this specific airframe is done. Next the stab and vertical fin...

s.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need a Charger for my AirField Sky Trainer Upgraded Version Airplane. gauiguy200 Batteries and Chargers 1 Mar 26, 2012 06:28 PM
MY 2200 watt E-raven flys ! gjestico Electric Heli Talk 41 Dec 22, 2004 11:47 AM
1 Fish, 2 Fish, Red Fish, I crashed my Raven! LuckyArmpit Electric Sailplanes 5 Apr 25, 2004 06:54 PM
Idea My contribution: Axi 2808/20 data and Dymond Raven performance ohms Power Systems 2 Apr 05, 2004 07:10 PM