Thread Tools
Mar 14, 2004, 04:07 PM
Thread OP
and elevator

thats 2 days of work for now

greetings

michael
Sign up now
to remove ads between posts
Mar 14, 2004, 04:10 PM
PRO BRO #157
daking's Avatar
beeeutifulll !!!!!!!!!
Mar 15, 2004, 07:30 AM
Thread OP
Ok!

Heres my power setup.

Its an flyware brushless www.flyware.de. No gear needed. Its a 16 pole motor which has an electric gear and can turn really big props.

Data

14 cells
Prop 16x8 Camcarbon
6400U/min
13,5V
ca. 45-47A (calculated from 1min running time)

Didnt have such a powerfull motor yet...so you have to be really carefull.

Video for fun:
http://misi-online.de/videos/motortest.avi

Comments wanted
Mar 16, 2004, 03:59 PM
Thread OP
Templates for cutting the back of the fuselage
Mar 16, 2004, 04:01 PM
Thread OP
and the result:
Mar 16, 2004, 04:02 PM
Thread OP
..
Mar 16, 2004, 04:03 PM
Thread OP
paper template for cutting the balsawood to right size
Mar 16, 2004, 04:04 PM
Thread OP
finally clued together and put under vaccuum......
Mar 16, 2004, 04:05 PM
Thread OP
....and the result a real good shaped piece of styro/wood
Mar 16, 2004, 04:05 PM
Thread OP
some spars added on top of the fuselage
Mar 16, 2004, 04:06 PM
Thread OP
and clued together
Mar 16, 2004, 04:07 PM
Thread OP
and the nose
Mar 16, 2004, 04:43 PM
PRO BRO #157
daking's Avatar
coming along very nicely.
Mar 16, 2004, 05:15 PM
Thread OP
yeahhh hope it comes along lightweighted as well...but I think it will as all the wood is weightselected


thanks for joining this thread

cu soon

mike
Mar 24, 2004, 03:43 PM
Thread OP
ok,

started building the wing

wing spars, leading and trailing edge finished


Quick Reply
Message:

Thread Tools