Thread Tools
Dec 12, 2012, 09:53 AM
Team Rag-A-Muffin'
KenSue's Avatar
Help!

Coroplast PLane Help Needed?


I have a 4x8 sheet of Coroplast. It's right at 1/8" thick. I have a hankering to build a plane with it. Here's the problem...I've never used this stuff before. I am not a newbie to the hobby, just never used this stuff. Does anyone have any idea where I can get some plans for this stuff. I don't care what kind of plane (slow flyer, 3d, pusher..whatever). I would prefer to use only the stuff I have, and not have to get more in different thickness's.

Thanks for any help in advance!
Kenny
Sign up now
to remove ads between posts
Dec 12, 2012, 10:52 AM
Call me Frosty
TheRealFrosty's Avatar
sounds like 2mil thickness.

www.spadtothebone.net ?
Dec 12, 2012, 02:32 PM
Team Rag-A-Muffin'
KenSue's Avatar
I completely forgot about that site. Thank you.
Dec 13, 2012, 10:12 AM
Registered User
draftman1's Avatar
thats awesome that you have the 2 mil, but you will need some 4 mil also, most spads need some, but luckily, the 4 mil is the easiest to get
Dec 14, 2012, 09:03 AM
Registered User
If it is 1/8" that is 3mm. All of my 4mm stuff actually does measure out to 4mm which is .160" Maybe it is really 4mm. the more common stuff, and good for rudders and stabs etc.
Dec 14, 2012, 05:00 PM
Call me Frosty
TheRealFrosty's Avatar
aspeed is right, that does seem more like 3mil if you do the actual conversion to metric correctly....


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion free flight plane...HELP needed zoheb_rox Free Flight 9 Jun 28, 2012 07:56 PM
Discussion Help!! newbie needs plane advice RCAddict16 Electric Plane Talk 10 Apr 26, 2012 07:16 PM
Discussion First LiPo plane, need some help connecting R0yalty Batteries and Chargers 1 Mar 04, 2012 07:11 PM
Question New to SPAD need some help with Coroplast. Water Boy SPAD - Simple Plastic Airplane Designs 8 Oct 30, 2006 03:12 PM
My Correx/coroplast Delta, need help el_rwn SPAD - Simple Plastic Airplane Designs 5 Sep 16, 2003 05:48 PM