10cc (.60 cu. in.) Gas Engine by Evolution Engines - Page 34 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 12, 2013, 05:23 PM
Engine Category Manager - EVO,
Quote:
Originally Posted by Wingwrecker
I used to have the Hangar 9 Mini-Pulse XT and loved it.

I imagine that this engine will pair well with the Pulse XT 40.

Any thoughts? If I decide to give it a go I will definately post updates.
We did most of the testing for a couple of years on a Saratoga, which is a mid-wing Pulse 40. Perfect match with this engine, you'll have a blast!

Pete
Sign up now
to remove ads between posts
Feb 12, 2013, 09:05 PM
I buy, I fly, I buy....
Wingwrecker's Avatar
Quote:
Originally Posted by Pete Bergstrom
We did most of the testing for a couple of years on a Saratoga, which is a mid-wing Pulse 40. Perfect match with this engine, you'll have a blast!

Pete
Good to hear Pete, thanks! This combo is going into my cart..
Feb 12, 2013, 10:45 PM
Registered User
I got an Sbach, with an electric setup (power 46 on 4 cell)
http://www.troybuiltmodels.com/items...342-55AAF.html
got the Evo 10cc coming, Think it will have the power to 3D with a 12x6 -- 13x6??
Feb 12, 2013, 10:55 PM
Registered User
Opps ,, its the 60" wing
http://www.troybuiltmodels.com/items...3D70V3AAF.html
same question? Think it will have the power to 3D with a 12x6 -- 13x6??
looking for anyone with practical experience, not theoretical or calculated possibilities ?
Feb 13, 2013, 12:33 AM
Registered User
kerwin50's Avatar
Quote:
Originally Posted by ehskds
Ready for flight but I don't know when il have the chance to get it out.
My what a big wing you have
Feb 13, 2013, 07:13 AM
Now you see it...
ehskds's Avatar
Lol! Flies like a rocket, tip stalls like crazy!
Feb 13, 2013, 07:30 AM
Registered User
Wrong forum the correct for this one is below.
Last edited by brunofporto; Feb 13, 2013 at 07:43 AM.
Feb 13, 2013, 07:41 AM
Registered User
Quote:
Originally Posted by jspauld2
I'm not sure who you talked to at Horizon Hobby product support, but I would just tell you that it is NOT Horizon's standpoint that running both the ignition and receiver off the same battery is safe.

What you do with your plane is absolutely up to you, but the product support tech that you talked with is incorrect about our standpoint.

Thanks,
Jimmy
And I thought I would be able to debut my new Evo 10cc and Meridian this weekend but the wing of Meridian does not fit right ... What can I do in this case?
Feb 13, 2013, 07:44 AM
Registered User
AA5BY's Avatar
I can understand it seeming serious, but it doesn't look so and doubtfully will affect flight.
Feb 13, 2013, 07:51 AM
Registered User
Quote:
Originally Posted by AA5BY
I can understand it seeming serious, but it doesn't look so and doubtfully will affect flight.
I can not even fit the wing screw to hold the wing...
Feb 13, 2013, 08:11 AM
Registered User
Problem solved with a small force applied at the tip of the wing before screwing in the fuselage.... Sorry for diverting the focus of this forum.
Feb 13, 2013, 06:09 PM
Sucker for biplanes
DMHIGHFLYER's Avatar
I'm hoping to get the big stick and 10cc out this weekend for engine break-in. I think once I get to a 13x6 the stick will do well. Now only if winter will go away!!!
Latest blog entry: Hobbyzone sport cub
Feb 13, 2013, 06:42 PM
Registered User
AA5BY's Avatar
Quote:
Originally Posted by brunofporto
Problem solved with a small force applied at the tip of the wing before screwing in the fuselage.... Sorry for diverting the focus of this forum.
Solutions are good... glad it worked out.
Feb 14, 2013, 04:56 PM
Gas Only
Fokker DII's Avatar
My 10cc now has over 10.5 hours flight time, after a non recorded 1 hour +- break in time. I fly about an hour several days a week.
Not one dead stick....yet.

It is running very strong for it's size. Flying a 6.5 lb low wing sport plane, turning a 13X6 Xoar prop. It will do unlimited vertical, but I soprt fly, not 3D.
Most of my flying is done at 7000/7500RPM on the telemetry tach. Fuel consumption is about 6 oz for 20 minutes of continous flight.

The black Goo has dissapeared after about 9 hours running. Now there is only oil similar to what a glow engine puts out.
My low end is still a tad rich (it loads up if idled for very long, and surges when first given full throttle), so the oil mess will get better with a little slow leaning of the lsn.
Feb 14, 2013, 07:12 PM
Now you see it...
ehskds's Avatar
Thanks for that update, sounds great!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Hangar 9 Meridian Sport ARF and Evolution 10cc Gas Engine Bajora Sport Planes 441 Apr 13, 2017 05:03 PM
Sold Fox 4.2 cu. in. (70cc) gas engine, electronic ignition, runs great barchiola Aircraft - Fuel - Engines and Accessories (FS/W) 7 Nov 19, 2012 08:07 PM
For Sale Evolution 58cc gas engine with new KS header parts and new Evolution tuned canister Daveyboycfs Aircraft - Fuel - Engines and Accessories (FS/W) 0 Jun 11, 2012 11:07 PM
Sold US Engines NIB 41cc (2.5 cu in) gas engine. REDUCED !! puplover Aircraft - Fuel - Engines and Accessories (FS/W) 0 Oct 15, 2011 02:41 PM
Sold Saito FG-36 4 stroke gas engine (2.2 cu in) James Love Aircraft - Fuel - Engines and Accessories (FS/W) 0 Mar 23, 2011 12:16 AM