IDEAFLY IFLY-4s - Page 2 - RC Groups
Thread Tools
Dec 08, 2012, 07:54 AM
Wannabe B-26 pilot!
Matt Halton's Avatar

Can't wait to read about how you guys are getting on with this new quad..Needless to say, I want one
Sign up now
to remove ads between posts
Dec 08, 2012, 08:49 AM
Registered User
Ok problem number 1. Is anyone using a wfly wft07 Tx with the wfr07 receiver? Can't seem to get them coded the manual is not much use.

I've got the yellow light flashing on the receiver but what's the next step?

Any thoughts would be appreciated.
Dec 08, 2012, 10:23 AM
Pilot in Training
MJS88's Avatar
Originally Posted by pigdogstix
Cheers startazz, been looking at that and others, just connecting the ifly up to the computer before I can code my wft07 to the receiver, now the computer doesn't want to play its stuck installing NET framework. Lol

Nothing is ever simple is it?
Thats right my friend, nothing is ever simple, welcome to Life 101!

As you can see from my previous, I got mine yesterday.. and as of this moment havent even unpacked it yet.. I plan on savoring that moment later today after my killer hangover goes away, otherwise you KNOW whats gonna happen.. LoL!!

Also, think Im going to follow you as I go through this and see how it goes with you and what you're doing.. so I guess you get to be the "Guinea-Pig" - LoL!!

Cheers mate, we'll get this going!
Dec 08, 2012, 10:48 AM
Aerial videographer
Aerial Filming's Avatar
pigdogstix i dont know if this video will help you but here you go:

Binding Process WFLY Modul (2 min 40 sec)
Dec 08, 2012, 11:27 AM
Registered User
Thanks chaps, sorry for the delay in replying got roped into putting the Christmas decorations up (does my mrs not know what's important!) thanks AF for the video, slightly different to the set up I have but I'll try turning the tx unit off and on again, it makes no mention of that in the manual, will post back later after I untangle myself from all this tinsel.
Dec 08, 2012, 11:42 AM
Aerial videographer
Aerial Filming's Avatar
Found this Flight Video of the IFLY-4s from Hobby-Wing

IDEA-FLY IFLY-4S (5 min 18 sec)
Dec 08, 2012, 11:51 AM
Aerial videographer
Aerial Filming's Avatar
Hi pigdogstix i know its a bit different but the Binding should be much the same i would have thought, good luck .
Last edited by Aerial Filming; Dec 08, 2012 at 12:10 PM.
Dec 08, 2012, 01:04 PM
Pilot in Training
MJS88's Avatar

I-Fly 4-s Setup - Part 1

I can tell already this is going to be a LONG weekend.. LoL!!

Well Jonathan & forum gentlemen..
Here I am, done with the unpacking;
Figured out how to attach the legs.. Im not going to mess with the camera gimbal just yet;
Everything that was in the box is laid out on the table;

1st Question..
I watched your video Jonathan.. thanks for posting it, except what is shown is not what I received.
I went to look at the I-Fly 4 videos I had seen and it seems that you have to connect the ifly to a pc - with a USB cable?

IFLY 4 first fly install video (4 min 6 sec)

What cable is it, I didnt receive any USB cable (see picture)

Then.. the radio;
There is that little module.. ok, what am I supposed to do with it?
I didnt see anywhere on the ifly or on the radio where to connect it.. ?
That cable in the plastic bag plugs into the back of the radio I think, but I have no connector of any kind where to plug it in ?

Remember, I am so NEW to all this I have no idea what to do next, sorry.

Dec 08, 2012, 01:08 PM
Pilot in Training
MJS88's Avatar
~ LoL ~ I think this thread will become the ultimate guide for all NooB's who have no experience at all and have never done any of this..

Dec 08, 2012, 01:15 PM
Registered User
I've got it plugged in via USB to the computer and with tx power off i have a red light on the reciever, turn on the tx and the light on the reciever goes out, in the manual I now have to go to advanced settings on the Tx then coding then press and hold set on the receiver to get flashing orange light it doesn't tell me what to do next the LCD on the Tx just goes back to the advanced menu again, turn Tx off and on again then I have no light on the receiver but the RF light on the Tx is now solid blue.

I now open ifly tools to calibrate in remote control and I get nothing.
Dec 08, 2012, 01:21 PM
Pilot in Training
MJS88's Avatar
Originally Posted by pigdogstix
I've got it plugged in via USB to the computer and with tx power off..

... I now open ifly tools to calibrate in remote control and I get nothing.
I dont even have a USB cable and no idea what to do with that little module that came with the radio.. Haha!
Dec 08, 2012, 01:34 PM
Aerial videographer
Aerial Filming's Avatar
pigdogstix and MJS88
Dec 08, 2012, 01:35 PM
Aerial videographer
Aerial Filming's Avatar
MJS88 The FC should just take a normal USB cable
Dec 08, 2012, 01:45 PM
Registered User
Thanks AF got all that on the disk and have followed it to the letter but it doesn't tell you how you know that the coding process was successful or not.

You can set level in ifly tools but nothing on the Tx is showing moving when you move the stcks to calibrate it.

For all I know coding may have been successful but I've no way of knowing.

Thanks for your help.
Dec 08, 2012, 02:05 PM
1111Mavrick's Avatar
Sorry to hear you guys are having trouble setting up your new 4`s`s

If Aerial Filming is willing to send me one for free I would be happy to do a video for the complete newbie from opening the box to first flight.

MJS88 you need to supply your own mini USB cable to connect the FC to your computer..... usually people have them lying around because they are so common for cameras and such.

Here is what they look like
Last edited by 1111Mavrick; Dec 09, 2012 at 02:32 PM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion IDEA-FLY IFLY-4S Foldable UAV quadcopter with auto-balance and altitude position FLYC Quadcopter MQ80 Multirotor Drone Talk 2 Feb 08, 2017 08:24 PM
Help! IDEAFLY IFLY-4 Altitude Hold jmystaki Multirotor Drone Talk 11 Sep 26, 2013 06:35 AM
Sold IdeaFly quad helisfreak Aircraft - Electric - Multirotor (FS/W) 3 Nov 04, 2012 12:34 PM
For Sale HoverFly Pro board, IdeaFly quad, 4x 12A HBK esc, helisfreak Aircraft - Electric - Multirotor (FS/W) 3 Jun 27, 2012 12:25 AM
New Product New Concept Quadcopter (Affordable Price) DiVidesign Multirotor Drone Talk 8 Dec 19, 2011 08:37 PM