RCLander new one piece version 12 blades rotor for 90mm edf - Page 4 - RC Groups
Thread Tools
Dec 22, 2012, 04:15 AM
Registered User
Rocketboy1030's Avatar
I bought the 70mm and the 90mm version , looks good .I hope the power is there....running them on test 'mule's first .
Sign up now
to remove ads between posts
Jan 02, 2013, 04:03 AM
Registered User

alloy 70mm and 90mm at HK


- and there's the single piece rotor in the 90mm version.
hope HK will sell the rotor separately as well...
Jan 02, 2013, 12:35 PM
Registered User
Quote:
Originally Posted by mopetista
- and there's the single piece rotor in the 90mm version.
hope HK will sell the rotor separately as well...
Pay attention to the rotor dia of 86mm vs 89 of CS. Just heads up depending on what brand shroud you use. That is 6mm gap on standard shroud.
Jan 02, 2013, 12:51 PM
Registered User

86mm vs. 89mm diameter - not sooo bad


thanks, I wasn't aware of that difference - however since we are talking diameters (not radii) it's 3mm difference, not 6mm, or 1,5mm "material" everywhere (and twice on opposite sides, so it makes 3mm) - could be done using tape on the inside of the shroud, or?
Jan 02, 2013, 06:05 PM
Registered User
MagnusEl's Avatar
CS 90mm12 rotor is not 89mm, I just measured two of mines, and the soft lighter one is 86,4mm, the stiffer, heavier one is 86,65mm.

Inner dia off the shroud is 88,4mm, so I think it would be a good match with this one pice rotor.
Jan 02, 2013, 07:16 PM
Registered User
Sounds great... Now if they were actually available to purchase as a rotor only.
Jan 02, 2013, 07:53 PM
Registered User
erh7771's Avatar
I hope they do the single piece rotor with the 120mm also...

If they're made in the same place as the haoye rotors (since the 70mm accepts the same shaft adapter and have similar looking hub holes) then it could stand a lot of spinning force.
Jan 03, 2013, 01:43 PM
Registered User
Quote:
Originally Posted by invertmast
Sounds great... Now if they were actually available to purchase as a rotor only.
I'm pretty sure ParkRCmodels stocks the rotors... these it?

http://parkrcmodels.com/product_info...oducts_id=1442

I know they stock the other Lander fan rotors (70mm 5-blade).
Jan 03, 2013, 02:01 PM
Registered User
alexandermh's Avatar
That's the multi-piece unit at ParkRC.
Jan 03, 2013, 02:05 PM
Registered User
So is there a ONE piece 12 blade 90 mm rotor ? Or is Tim yoinking all our chains ?
Jan 03, 2013, 04:05 PM
Registered User
anlucas's Avatar
Quote:
Originally Posted by pencon
So is there a ONE piece 12 blade 90 mm rotor ? Or is Tim yoinking all our chains ?
Yes there is.

HK sells the fan and the fan+motor combo.

http://www.hobbyking.com/hobbyking/s..._Heatsink.html
Jan 03, 2013, 05:16 PM
Registered User
Quote:
Originally Posted by anlucas
Yes there is.

HK sells the fan and the fan+motor combo.

http://www.hobbyking.com/hobbyking/s..._Heatsink.html

He said ROTOR.... As in Fan ROTOR only.. Not fan and motor
Jan 03, 2013, 05:28 PM
Registered User
alexandermh's Avatar
I haven't seen the rotor sold separately anywhere yet.
Jan 03, 2013, 05:41 PM
Registered User
unclecrash's Avatar
I don't know why Tim would tell us all it was already available when obviously it has not hit the market as a one piece rotor yet!!
Jan 03, 2013, 05:45 PM
Registered User
Alpha10's Avatar
Quote:
Originally Posted by unclecrash
I don't know why Tim would tell us all it was already available when obviously it has not hit the market as a one piece rotor yet!!
It has... Park and EDFhobbies has them


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New series EDF LEDFDPS64-1A33 4S/.10 blades rotor version Tim Wan Electric Ducted Fan Jet Talk 2 Oct 06, 2012 12:45 AM
Sold TamJets TJ90MM Fan With Change Sun 12 Bladed Rotor $275 Shipped FlyBoyTha1 Aircraft - Electric - Jets (FS/W) 1 Apr 02, 2012 05:24 PM
Sold Alfa 5 bladed Rotor and 5 rotor plugs NEW $12.00 Shipped Mikey 68 Aircraft - Electric - Jets (FS/W) 1 Jan 18, 2012 05:58 PM
Question Will a genius canopy (one piece new version) physically fit on an MCPx? Ampdraw Micro Helis 8 Dec 12, 2011 05:16 PM