Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Dec 02, 2012, 11:51 AM
john_53_70 is offline
Find More Posts by john_53_70
Registered User
john_53_70's Avatar
Help!

Unstoppable tail wag


I have a clone 450, spectrum tx and receiver. I'm using a spectrum h3020 digital tail servo, my gyro is a Gy48v. The odd part is it flew great I tried to put this frame in a fiberglass body and it was to heavy so I went back to the regular frame, now it has a bad tail wag in avcs mode, so replaced the gyro thinking it went bad. Well even with the new gyro ( which is different kind from what I had) it still does the tail wag all setting are correct and have not changed since it flew good. Any idea what will make his happen this?
Sign up now
to remove ads between posts
Old Dec 02, 2012, 06:42 PM
alanthor is offline
Find More Posts by alanthor
hovering-stage
Try decrease the gyro sensitivity (gain)
Old Dec 02, 2012, 06:54 PM
old4570 is online now
Find More Posts by old4570
Registered User

Yeah


Might need to be re-tuned , so play with the gain ..
Also check the controls for any binding ..
Rotor speed ? has it gone up ? sometimes if you increase rotor speed it increases the sensitivity of the gyro as the tail rotor has more authority . And there probably is a few other things , but if you haven't changed anything
Old Dec 02, 2012, 07:08 PM
john_53_70 is offline
Find More Posts by john_53_70
Registered User
john_53_70's Avatar
Well with the digital servo being used it say's to set it at zero, although I did try that and it made no deffrance. And the head speed is the same. Could I have a bad tail servo
Old Dec 02, 2012, 07:42 PM
karlik is offline
Find More Posts by karlik
Closed Account
Look for a missing or worn down tooth on a gear.
Old Dec 02, 2012, 09:02 PM
john_53_70 is offline
Find More Posts by john_53_70
Registered User
john_53_70's Avatar
Found it, two parts the shaft that holds the tail rotor was dry and not allowing the steering Mechanism to slide freely. So I lubed it up. And the other part was the nut that holds down the metal pice that holds the tail rotor blade was loose. So I was about to sling a blade off! Guess the old girl was trying to tell me something was wrong


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion T-REx 450 Sport tail wag jmparsons Electric Heli Talk 1 Nov 11, 2012 10:00 PM
Help! Tail wag Kwik-Fli DoctorG Classic Pattern Flying 12 Nov 08, 2012 05:27 PM
Help! 600 3GX Tail wag midohioboarder Large Electric Helis 0 Mar 28, 2012 09:25 PM
Help! Tail wag on spool up and spool down tonycopter Beginner Training Area (Heli-Electric) 9 Mar 17, 2012 03:54 AM
Discussion 450 pro tail wag dgibbons 3D Electric Heli Flying 3 Mar 11, 2012 01:00 PM