New Products Flash Sale
Thread Tools
Old Dec 05, 2012, 06:19 PM
Steve_ is offline
Find More Posts by Steve_
Dum enuff 2 think I'm smart :o
Steve_'s Avatar
Quote:
Originally Posted by mikefromgermany View Post
Yes, Steve,
my intentions are to use the onboard SMD-Leds to trigger the much more powerful Nav-LEDS without influencing the really small 4-in-one PCB of my X4s. So it's really importantfor me to draw as less current as possible from the two LED-sockets - just to play it safe. I will not get any replacement PCB in near future for these quads - they will not be produced for months as a spare ....
-mike-
But do you need the original LED to stay in place?

Because if you don't, the opto-isolators are the safest way.

I don't know how comfortable you are with soldering / desoldering SMD
components, but you will have to tap in somewhere
Last edited by Steve_; Dec 05, 2012 at 06:25 PM.
Sign up now
to remove ads between posts
Old Dec 05, 2012, 06:28 PM
mikefromgermany is offline
Find More Posts by mikefromgermany
Not here to help stupids
mikefromgermany's Avatar
Quote:
Originally Posted by Steve_ View Post
But do you need the original LED to stay in place?

Because if you don't, the opto-isolators are the safest way.

I don't know how comfortable you are with soldering SMD components,
but you will have to tap in somewhere
SMD soldering - no problem - and yes, i want to let the leds stay in place - they are built in as eyes in the canopy.
hubsan x4 in wind (2 min 8 sec)

-mike-
Old Dec 05, 2012, 06:36 PM
Steve_ is offline
Find More Posts by Steve_
Dum enuff 2 think I'm smart :o
Steve_'s Avatar
Holy crap !! I had no idea how small these were.

You are brave if you want to take the iron to such a tiny board
Old Dec 05, 2012, 06:47 PM
mikefromgermany is offline
Find More Posts by mikefromgermany
Not here to help stupids
mikefromgermany's Avatar
Quote:
Originally Posted by Steve_ View Post
Holy crap !! I had no idea how small these were.

You are brave if you want to take the iron to such a tiny board
the contacts of my SMD Nav-LEDs are just 1,5mm apart - soldered them to 0,1mm magnet wire (under a 10x magnifier...)
But these little beasts are worth it - d*** fast for their size - from zero to 300 yards in 5 seconds (vertical too with some other motors that draw 1,2 amps each at full throttle) - therefore the lights....
-mike-
Old Dec 05, 2012, 07:40 PM
minbari is offline
Find More Posts by minbari
Registered User
minbari's Avatar
Quote:
Originally Posted by mikefromgermany View Post
Yes, Steve,
my intentions are to use the onboard SMD-Leds to trigger the much more powerful Nav-LEDS without influencing the really small 4-in-one PCB of my X4s. So it's really importantfor me to draw as less current as possible from the two LED-sockets - just to play it safe. I will not get any replacement PCB in near future for these quads - they will not be produced for months as a spare ....
-mike-
If you really want to play it safe. Disconnect the stock leds and use that board to drive the opto. Then use the opto to drive all the leds, including the the stock ones
Old Dec 05, 2012, 08:08 PM
Steve_ is offline
Find More Posts by Steve_
Dum enuff 2 think I'm smart :o
Steve_'s Avatar
Quote:
Originally Posted by minbari View Post
If you really want to play it safe. Disconnect the stock leds and use that board to drive the opto. Then use the opto to drive all the leds, including the the stock ones
He just nailed it. This is by far the safest way to do it.

I never even thought of driving the stock LED's with the opto

Thanks again minbari for all the input
Old Jan 09, 2013, 03:10 PM
mikefromgermany is offline
Find More Posts by mikefromgermany
Not here to help stupids
mikefromgermany's Avatar

Project "ridiculous micronisation"


Steve,

Im getting old... after soldering 20 of these without glasses..... can't see a thing now....

Just to give you feedback

-mike-
Old Jan 09, 2013, 05:09 PM
minbari is offline
Find More Posts by minbari
Registered User
minbari's Avatar
Lol, well, they are designed to be surface mount.
Get over of those ring light magnifiers. Works great for me
Old Jan 12, 2013, 09:29 AM
Steve_ is offline
Find More Posts by Steve_
Dum enuff 2 think I'm smart :o
Steve_'s Avatar
Yup, they get pretty tiny.

My next project will be lights for the main blades, powered by a
tiny high value capacitor. I still need to see how many lights I can
run for 5 minutes. Maybe none, don't know yet.
Old Jan 12, 2013, 11:31 AM
CaptJac is offline
Find More Posts by CaptJac
Rotor Controller
CaptJac's Avatar
Here's one I learned by accident - you can put LED's in series. I'll be darn!! Even more darn is if one LED is a blinker - the others will blink too.

captJac
RCG Plus Member
Old Jan 12, 2013, 11:57 AM
minbari is offline
Find More Posts by minbari
Registered User
minbari's Avatar
Lol, yup. Led is just a diode. As long as your series voltage is high enough to turn all the leds on, then it works just fine.

As for the blinker, that is because there is an external IC that does the blinking (embedded in the case)

Little known fact, ALL diodes emit light. Most is in the ir spectrum and the black case blocks it


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Run LEDS from "x" port on naza WyDiablo Multirotor Talk 6 Nov 09, 2012 10:11 AM
Discussion Here's a new one, need help getting an EVO to STOP running. Wookster Engines 19 Oct 09, 2012 12:34 AM
For Sale LOT of 6+ R50's, 2 DA50's(one brand new), and MANY new parts for R50's snooptwomey Aircraft - Fuel - Engines and Accessories (FS/W) 6 Mar 15, 2012 11:51 PM
Discussion Driving LED from Servo output - PicAxe-08 Success! deswong DIY Electronics 18 Apr 20, 2009 09:00 PM
Mini-HowTo How many HL tanks can run at one time? Blitzkrieg65 RC Tanks 0 Feb 15, 2008 12:03 PM