Thread Tools
Dec 01, 2012, 02:48 PM
Registered User
Discussion

Heavy metal (not really ) Phantom


Ok folks , since my phantom is partially covered in pop cans ,I thought it could perhaps achieve non foamy status . The pop can sheets once the end caps were removed came out to .16 of an ounce each . I used about 6 pop cans so with 3m adhesive not more than a couple ounces I would think .This all started after a crash and I covered it to hide the nasty crash damage . This thing is going back up with a BL32 Changesun 10 blade and 6S . I'm pondering changing the tail to an all moving tailplane and covering it as well . I'm a bit of a rivet addict .
Last edited by pencon; Dec 01, 2012 at 03:15 PM.
Sign up now
to remove ads between posts
Dec 01, 2012, 02:57 PM
Registered User
Here's a sheet of popcan AL on the gram scale . 4.6 grams or .16 of an oz . Comments are welcome by the way ..
Last edited by pencon; Dec 01, 2012 at 03:16 PM.
Dec 01, 2012, 06:42 PM
Registered User
Double E's Avatar
Why not just use aluminum ducting tape or flight metal?
Dec 01, 2012, 07:48 PM
Registered User
I've got tape on parts of it . The aluminum hides the damaged cracked areas , which looked awful , without even sanding them . The tape would have shown all the cracks.I find all the dings on a foamy get transfered right through the tape so it would end up looking rough pretty quick as well . The can aluminum hides all the foam beading or flaws completely . Plus the aluminum sheeting looks way better than the tape up close. This is actually practise for another plane .
Last edited by pencon; Dec 01, 2012 at 07:55 PM.
Dec 01, 2012, 08:52 PM
Registered User
Looks Cool to me ,good luck
Dec 02, 2012, 12:10 AM
jofro
Talking about heavy metal, there's deffinitelly no one to match Black Sabbath with Dio orTony Martin. Have a good listen, sounds just about as good as my metal/foam combo I'm working on, Joe.
Dec 02, 2012, 01:00 AM
Registered User
deleted
Last edited by pencon; Dec 02, 2012 at 01:23 AM.
Dec 02, 2012, 01:31 AM
jofro
Quote:
Originally Posted by pencon View Post
Got pics?
You got to be MAD! J.
Dec 02, 2012, 01:53 AM
Registered User
Dude , I like the turbine but please put on a shirt .
Dec 02, 2012, 03:39 PM
jofro
Quote:
Originally Posted by pencon View Post
Dude , I like the turbine but please put on a shirt .
Mate, you have seen nothing yet! You shoud see the maestro flying jets in budgee smugglers! Ciao, J.
Dec 02, 2012, 04:46 PM
Registered User
That's ok I'll pass .. one skin pic is enough
Last edited by pencon; Dec 02, 2012 at 04:54 PM.
Dec 03, 2012, 10:09 AM
High Dynamic Thrust
stoneenforcer's Avatar
now can the fuse to match
Dec 03, 2012, 02:54 PM
jofro
While at heavy metal subject, this foamy is covered with 24kt gold, J.
Dec 03, 2012, 05:58 PM
Registered User
Might do Stoneenforcer, first I want to see if it flys ok after the current repairs before spending more time on it .Perhaps I'll start at the front and work my way back .
Last edited by pencon; Dec 03, 2012 at 09:31 PM.
Dec 04, 2012, 11:50 AM
My dog is PERFECT in my eyes
Could have used liquid sheeting, easier (maybe)

http://www.wowplanes.com/product_inf...roducts_id=130


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Huge Scratchbuild 90mm F-4 Phantom (Not complete- close) FlyJumper Aircraft - Electric - Jets (FS/W) 1 Jun 01, 2012 05:29 AM
Discussion Flying Heavy Metal Airplane Models. epoxyearl Scale Fuel Planes 57 Apr 13, 2012 06:21 AM
Alert Turnigy Turbine Engine released! not really... vettster Electric Ducted Fan Jet Talk 1 Mar 05, 2012 11:04 AM