Tarot FY680 hex - Page 5 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 09, 2012, 03:04 AM
Registered User
just starting my assembly..
Sign up now
to remove ads between posts
Dec 09, 2012, 12:44 PM
Registered User
Quote:
Originally Posted by sgg05158
just starting my assembly..
I think it looks as if they almost cut out too much of the frame to lighten it.

Peter
Dec 09, 2012, 02:52 PM
Registered User
Quote:
Originally Posted by sgg05158
just starting my assembly..
good positioning for ESC's, going to copy that on mine!!.
Dec 09, 2012, 02:54 PM
Registered User
OK so is it only me that thinks the decals are rubbish.....!, going to cut some in vinyl on my plotter/cutter, if anybody likes them I could send some (SAE) foc.
Dec 09, 2012, 03:20 PM
Registered User
I just slipped a few of the decals on mine and was thinking they looked pretty good. I was expecting crappier looking stickers.

If yours come out cool, though, Id take some!
Dec 09, 2012, 04:20 PM
Registered User
Quote:
Originally Posted by achiii
I just slipped a few of the decals on mine and was thinking they looked pretty good. I was expecting crappier looking stickers.

If yours come out cool, though, Id take some!
Mine just seem to distort...may not be letting them get wet enough, but if my 'alternative' decals look good you can of course have some, (designing them at this very moment)
Dec 09, 2012, 04:49 PM
Registered User
Yeah, ruined the first 2 that way, didn't wait long enough and left some letters behind. 2nd two I waited a few minutes for pre soaking and they floated right over and look pretty good.

Any chance I can commission a couple custom decals?
Dec 09, 2012, 07:51 PM
Registered User
Quote:
Originally Posted by achiii
Yeah, ruined the first 2 that way, didn't wait long enough and left some letters behind. 2nd two I waited a few minutes for pre soaking and they floated right over and look pretty good.

Any chance I can commission a couple custom decals?
yes you can, no problem!
Dec 10, 2012, 09:45 AM
Registered User
Just ordered from Foxtechfpv.com
I hope to get it before Xmas. but usually they just send within 24 hours,
4-5 days EMS shipping .
the cheap aluminum version doesn't seem to be attractive,
no folding landing gear, and the aluminum tube could soon be scratched or even broken at the lock piece.
Dec 10, 2012, 10:23 AM
Registered User
Quote:
Originally Posted by x2001
Just ordered from Foxtechfpv.com
I hope to get it before Xmas. but usually they just send within 24 hours,
4-5 days EMS shipping .
the cheap aluminum version doesn't seem to be attractive,
no folding landing gear, and the aluminum tube could soon be scratched or even broken at the lock piece.
nearly went for that one by mistake on ebay, wondered why it was cheaper than the others!! and 100g heavier I think!, the difference in price as well.......I paid 89 for mine but some are asking 149 for exactly the same thing.
Dec 10, 2012, 10:56 AM
Registered User

decals


had a go at designing my own decals!! of course there is no font like that so had to edit node by node a font that looked the best/easiest to mod, this is the very first attempt. I mirrored and flipped the word so as to make it a 'one go' application.
I think it needs a bit less height in the word and to come down a bit more from the centre line at the top. The orange vinyl that I had lying around seems to go well with the front e/mounts, will prob do the other 4 in a mid or light blue, might also do the others smaller to aid orientation.
wadaya think??
.
Last edited by madoldgit; Dec 10, 2012 at 11:02 AM.
Dec 10, 2012, 02:06 PM
Registered User
That looks pretty good! and adding the color coding to match the aluminum and aid orientation is a great idea.
Dec 10, 2012, 03:57 PM
Registered User
Quote:
Originally Posted by achiii
That looks pretty good! and adding the color coding to match the aluminum and aid orientation is a great idea.
Thanks!, have been refining the artwork and should look even better (radiusing the 3 lines both sides of the lettering)
Dec 10, 2012, 04:34 PM
Registered User
Quote:
Originally Posted by madoldgit
nearly went for that one by mistake on ebay, wondered why it was cheaper than the others!! and 100g heavier I think!, the difference in price as well.......I paid 89 for mine but some are asking 149 for exactly the same thing.
Where did you manage to find a FY680 that cheap?

Peter
Dec 10, 2012, 04:36 PM
Registered User
Quote:
Originally Posted by madoldgit
had a go at designing my own decals!! of course there is no font like that so had to edit node by node a font that looked the best/easiest to mod, this is the very first attempt. I mirrored and flipped the word so as to make it a 'one go' application.
I think it needs a bit less height in the word and to come down a bit more from the centre line at the top. The orange vinyl that I had lying around seems to go well with the front e/mounts, will prob do the other 4 in a mid or light blue, might also do the others smaller to aid orientation.
wadaya think??
.
Looks stunning!!

Could I persuade you to send a set all the way to Denmark, if I pay you the shipping expenses?

Peter


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Interested in getting a Mikrokopter hex or a droidworx hex. How hard is set up? LMAO Multirotor Drone Talk 8 Dec 28, 2010 08:47 AM
Discussion Tarot 450SE V2 GF helipr0 Mini Helis 12 Oct 19, 2009 05:47 PM
Discussion Tarot 450SE V2 GF Kit? carmen5.3 Electric Heli Talk 8 Sep 18, 2009 09:54 AM
Discussion Align, Tarot, CopterX edfardos Electric Heli Talk 4 Mar 14, 2009 12:15 AM
For Sale Tarot 450 V2 KIT KS-Model Aircraft - Electric - Helis (FS/W) 5 Nov 10, 2008 11:16 AM