No way to save OSD parameters! HELP!! - RC Groups
Thread Tools
Nov 25, 2012, 03:05 AM
Check Your Six.
RedBaronFPV's Avatar
Help!

No way to save OSD parameters! HELP!!


I am trying to configure the ET OSD for the first time. I have my logger working and the eagle eyes working, however I am having a problem configuring the onscreen OSD parameters. For some reason, when I set up all of the parameters and I must hit ok to save, there isnt any bottom row on my OSD configuration page, without any bottom row of buttons, I have no way to save, thus making the OSD useless..

How can I get the bottom row to appear? Please see graphic for better explanation.
Thanks!
Sign up now
to remove ads between posts
Nov 25, 2012, 04:39 PM
Registered User
Soyrico's Avatar
I don't see anything that could have disabled that section. Have you tried a basic PC reboot? If that doesn't work try to reinstall the software. Save what ever config settings you may have to a different folder in case you have to do a uninstall.
Nov 25, 2012, 04:43 PM
Check Your Six.
RedBaronFPV's Avatar
Quote:
Originally Posted by Soyrico
I don't see anything that could have disabled that section. Have you tried a basic PC reboot? If that doesn't work try to reinstall the software. Save what ever config settings you may have to a different folder in case you have to do a uninstall.
Thanks for the reply, yes, rebooted a few times, just re-installed as well, latest elogger version, non-beta...ugh.

The second line of buttons isnt even listed, just the first row..
Nov 26, 2012, 12:59 PM
billpa's Avatar
funkman, that's strange. Can you confirm that the scrollbar to the right of the page won't let you scroll down to show the additional buttons? If not, what version of our software are you running, what is the screen resolution of your PC monitor, and what type of PC is it?
Nov 26, 2012, 01:02 PM
Check Your Six.
RedBaronFPV's Avatar
[QUOTE=billpa;23367901]funkman, that's strange. Can you confirm that the scrollbar to the right of the page won't let you scroll down to show the additional buttons? If not, what version of our software are you running, what is the screen resolution of your PC monitor, and what type of PC is it?[/QUOTE

Thanks, I have scrolled as far as it goes, can see the bottom of the window and nothing below. I am using a HP mini, which is in my GS. I am going to bring the plane inside and try it on my main computer and see if it makes any difference. I am using the latest version 10.4, just downloaded before trying to configure..
Nov 26, 2012, 03:03 PM
Registered User
Soyrico's Avatar
Can you change your HP mini graphic card resolution? I'd recommend the next higher resolution if possible just as a test.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question is there a automated way to save geotagged google earth images? cmulder UAV - Unmanned Aerial Vehicles 2 May 18, 2012 02:29 PM
Discussion A new way to "save" on health care... kf2qd Life, The Universe, and Politics 10 May 08, 2012 02:18 PM
Discussion Wookong question, please help. Advanced parameters in STEP 2 of the manual jasper7821 Multirotor Drone Talk 0 May 01, 2012 06:27 PM
Discussion Castle Link Software locks up when loading or saving parameters JohnM Castle Creations 16 May 17, 2006 08:49 AM