Thread Tools
Feb 03, 2013, 01:12 PM
Registered User
Hey all, been following this thread since the start and having a lot of fun with the Phantom I've had for a few weeks now. Some great helpful info in this thread

Quick question? Been looking to buy some extra batteries and after deciding on the Turnigy Nano-Tech's with a 25-50c discharge rating I spotted two other Nano-Tech's with higher discharge ratings, 45-90c + 35-70c.

Will these work ok with the Phantom? I noticed the DJI specs are stated as 20c.

http://www.hobbyking.com/hobbyking/s...arehouse_.html

http://www.hobbyking.com/hobbyking/s...arehouse_.html
Sign up now
to remove ads between posts
Feb 03, 2013, 01:14 PM
Registered User
Hi guys, been lurking a while and following this thread. What an inventive lot you are ! Brilliant, however being a complete noob and I realise this may not be technically the right place to post but,

Here goes I have ordered aPhantom, yet to arrive. This is solely for hobby use, tomorrow I have to make a quick decision on a Gopro 2hd, can I with the addition of a cable use this for fpv should I choose to go that route or do I need the 3 black.

Thanks roy
Feb 03, 2013, 01:16 PM
DJI Support
Tahoe Ed's Avatar
Some have posted that they have actually gotten shorter flight times with the higher C lipos than the lower C. My feeling is with the Phantom, 20-50C will be just fine for your needs.
Latest blog entry: M200 FAQ's
Feb 03, 2013, 01:21 PM
Registered User
Quote:
Originally Posted by Tahoe Ed
Some have posted that they have actually gotten shorter flight times with the higher C lipos than the lower C. My feeling is with the Phantom, 20-50C will be just fine for your needs.
Thanks for the swift response
Feb 03, 2013, 01:22 PM
Registered User

Moose Encounter


I thought I'd share some footage I got of two moose last week. We spotted them while we were driving, and we were able to fly our Phantom over and get some pretty spectacular video!

DJI Phantom - MOOSE! - DJIguy (1 min 42 sec)
Feb 03, 2013, 01:26 PM
HGT
HGT
Suspended Account
Quote:
Originally Posted by CSpaced
http://www.centuryheli.com/products/...?prtnm=DJIPH10

Here you go, can't beat the price either - $3 a set.
Century should have their shipment some time this week. That's where I purchased my Phantom and have some spares on order also.
Feb 03, 2013, 01:28 PM
HGT
HGT
Suspended Account
Quote:
Originally Posted by kallend
Are you sure of that? I bought some 1038 DJI props from them a few weeks back and the price was for 2 PAIRS.
The page says 1CW+1CCW
Feb 03, 2013, 01:33 PM
HGT
HGT
Suspended Account
Quote:
Originally Posted by DJIguy
I thought I'd share some footage I got of two moose last week. We spotted them while we were driving, and we were able to fly our Phantom over and get some pretty spectacular video!

http://www.youtube.com/watch?v=KSSTO2LSY2Q
NICE! They didn't seem to mind it much... More ideas for my video library.
Feb 03, 2013, 02:06 PM
Registered User
Quote:
Originally Posted by Eric Harris
This is a video I took last night. I still need to balance the props, but with a little stabilization I was able to make a cool shot out of it. The GoPro 2 gets a lot of noise and quality loss at night.

http://www.youtube.com/watch?v=YVKcF3QpwUI
Amazing shot! That was with the old GoPro? Stock Phantom setup?
Feb 03, 2013, 02:22 PM
Registered User
Quote:
Originally Posted by Quad Head
I am now the proud owner of a real Du Bro prop balancer! It didn't start out easy at my LHS, but it ended up being just fine and learned a lot in the process.

For anyone reading any of these threads thinking about balancing their props, DO NOT WASTE YOUR MONEY BY BUYING ANYTHING OTHER THAN A DU BRO PROP BALANCER!

The difference is quite simple it is night and day, period.

Now I'm off to go balance a few sets of props.
I've never balanced props before, does this balancer come with directions on the proper way to do it?
Feb 03, 2013, 02:26 PM
Flying Phantom
Quote:
Originally Posted by rcpilot23
Dont fly indoors if you have little experience flying

It will end in tears
Yeah, figured that now, also...hehe
fortunately no damage done to man or machine, so I just let it "House-FLying" wise...
all went pretty well, till i tried to hard

better train outside, or see if I can sneak the Phantom into the gymnasium, since as a sportsteacher i have a key to it...

thanks for the Video on how you mounted it!
man, why didnīt i think of that?
have tons of those GoPro 3M pads laying around and mounted that way should really help bringing the Cam at/closer to the CG
guess it will also help with vibration?
since they have quite an amount of insulation between both adhesive areas.

@Casperhyde:
I wasn`t flying GPS mode at all!
the 3-4 Testflights i have done so far were all in Atti Mode and the Phantom flew quite nice actually despite the windgusts, but i could withstand them pretty good, would have thought it to be much worse.

Unfortunately the next 2-3 days it is said to blow from 22-40 knots!
severe wheather warning for our area, so no flying i guess...

I will focus on balancing the Probs properly and getting ahold of 1 or 2 spare-batteries, my dealer said he should have the original DJI ones in stock this coming week

Alex
Feb 03, 2013, 02:54 PM
Registered User
Here's some clips of much smoother flight once I balanced the props! (Until today when I shredded them getting the last shot!). Tech details on the video but here it is in a nut shell:
1)Balance Props!
2) GoPro Hero 3 Black-1080 60p medium view
3) In FCPX, import footage to a 30p timeline and slow clip to 50%.
4) Use FCPX stabilization feature (I forgot to on the one clip at 1:05-for an idea of what a non-stabilized shot looks like).
5) Fly in as straight a line as possible in ATTI mode.

I'm only looking for short smooth shots to use in my video productions. Not in capturing complete flights.

Still some warble, mostly in the sunny clips, I think it's the GoPro3 making an adjustment to battle the brighter light. Either cranking up shutter speed internally or lowering ISO? Not sure but on a bright day some kind of ND would help. Maybe adding a Gimbal but most of those that I have seen shows the props in the shots too much. Making the footage unusable for my purposes.

DJI Phantom-Smoother Flying! (2 min 38 sec)
Feb 03, 2013, 03:11 PM
Head in the Clouds
Quote:
Originally Posted by GGoodrum
No, not from a weight standpoint. Andrey says he can do a small cage-type setup for the RX100, and the Phantom should still be fine carrying this. There's not a huge weight difference between the RX100 and the H3B with the plastic case.

-- Gary
If this ever comes to fruition I would order one in a heartbeat, as I'm sure many other Phantom/RX100 owners would do.
Feb 03, 2013, 03:39 PM
Videographer/Product Reviews
daskim's Avatar
Quote:
Originally Posted by camera_man
If this ever comes to fruition I would order one in a heartbeat, as I'm sure many other Phantom/RX100 owners would do.
Also something I would be interested in as well Gary.
Feb 03, 2013, 03:43 PM
Registered User

Frame Drop?


Quote:
Originally Posted by Pfreddy
Here's some clips of much smoother flight once I balanced the props! (Until today when I shredded them getting the last shot!). Tech details on the video but here it is in a nut shell:
1)Balance Props!
2) GoPro Hero 3 Black-1080 60p medium view
3) In FCPX, import footage to a 30p timeline and slow clip to 50%.
4) Use FCPX stabilization feature (I forgot to on the one clip at 1:05-for an idea of what a non-stabilized shot looks like).
5) Fly in as straight a line as possible in ATTI mode.

I'm only looking for short smooth shots to use in my video productions. Not in capturing complete flights.

Still some warble, mostly in the sunny clips, I think it's the GoPro3 making an adjustment to battle the brighter light. Either cranking up shutter speed internally or lowering ISO? Not sure but on a bright day some kind of ND would help. Maybe adding a Gimbal but most of those that I have seen shows the props in the shots too much. Making the footage unusable for my purposes.

http://youtu.be/w3zYXwtqbVs
I notice you are getting an odd jerk forward from time to time throughout the footage. This is something I've seen with raw footage out of the Canon 5D MKII. It generally goes away when rendering but I've also used Cineform/Neoscene as a mid-step to resolve. Not sure if it's the same thing but just a data point for you

Regards,
Fred


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI Quadcopter Frame BUILD Thread Quad_Addict Multirotor Drone Talk 78 Mar 17, 2014 10:20 PM
Mini-HowTo POSTING VIDEO: How to Upgrade a Gaui 330x quadcopter with a DJI NAZA Lucidity47 Multirotor Drone Talk 5 Jun 07, 2012 12:31 AM
Video Multiwii Quadcopter Dji F-450 frame Updated Video Anda Inc. Electric Heli Talk 1 May 23, 2012 02:51 PM
Discussion DJI S800 Spreading Wings has landed at Quadcopters UK Headquarters QuadcoptersUk Multirotor Drone Talk 8 May 14, 2012 01:27 PM