Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Nov 20, 2012, 04:59 AM
Antonior is offline
Find More Posts by Antonior
Registered User
Antonior's Avatar
Help!

Engine identification


Please help me to identify this engine



Thanks
Sign up now
to remove ads between posts
Old Nov 20, 2012, 06:30 AM
earlwb is offline
Find More Posts by earlwb
Registered User
earlwb's Avatar
It looks like a Cox Queen Bee .075 radio control engine to me.
It is sort of a big bore Baby Bee with a rear mounted RC throttle carburetor on it.
It has a reed valve in the back, so it can run forward or in reverse as needed.
RCG Plus Member
Old Nov 20, 2012, 06:33 AM
Antonior is offline
Find More Posts by Antonior
Registered User
Antonior's Avatar
FOUND!! It is a Cox Queen Bee 0.74. Now I need the worksheet. Can anybody provide it?

Thanks again from Italy
Old Nov 20, 2012, 01:40 PM
coriolan is online now
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Here is a pdf of the QB manual:
http://coxengines.ca/files/074%20Queen%20Bee.pdf
You can also get some spare parts here:
http://coxengines.ca/cox-074/
Lot of Cox infos here:
http://www.mh-aerotools.de/airfoils/cox_frameset.htm
Old Nov 20, 2012, 02:29 PM
Antonior is offline
Find More Posts by Antonior
Registered User
Antonior's Avatar
Quote:
Originally Posted by coriolan View Post
Here is a pdf of the QB manual:
http://coxengines.ca/files/074%20Queen%20Bee.pdf
You can also get some spare parts here:
http://coxengines.ca/cox-074/
Lot of Cox infos here:
http://www.mh-aerotools.de/airfoils/cox_frameset.htm
Thanks, Coriolan. You are very kind
Old Nov 20, 2012, 02:51 PM
surfer_kris is online now
Find More Posts by surfer_kris
Registered User
surfer_kris's Avatar
Here is a little video of one of mine on the bench; Queen Bee
Last edited by surfer_kris; Nov 20, 2012 at 03:02 PM.
Old Nov 20, 2012, 03:37 PM
Brutus1967 is online now
Find More Posts by Brutus1967
the great Gassif´er
Runs beautiful! Too bad I cannot read the RPM at idle.... Really curious how low it will go.

Brgds, Bert
Old Nov 20, 2012, 06:35 PM
earlwb is offline
Find More Posts by earlwb
Registered User
earlwb's Avatar
Well with the little 1/2 A size engines, they can idle at 6,000 or so RPMs and the plane will still land just fine. The air density doesn't change as the plane gets smaller, so it has to overcome more drag in relation to a larger size plane and engine.

But the Queen Bee engines aren't really bad, they run quite well. But unfortunately they weren't all that popular though.
RCG Plus Member
Old Nov 21, 2012, 12:44 AM
surfer_kris is online now
Find More Posts by surfer_kris
Registered User
surfer_kris's Avatar
Quote:
Originally Posted by Brutus1967 View Post
Runs beautiful! Too bad I cannot read the RPM at idle.... Really curious how low it will go.
In the video it goes down to about 5000rpm, but it runs very rich. The fix for that is to add an airbleed hole and it will run better.
Old Nov 21, 2012, 02:40 AM
Brutus1967 is online now
Find More Posts by Brutus1967
the great Gassif´er
It's a shame, Graupner, who carried the Cox engines in Europe, did not have the full range. As far as I know the RC engines were never in their line-up, or I would have had one for sure....

Brgds, Bert
Old Nov 24, 2012, 11:34 AM
DarZeelon is offline
Find More Posts by DarZeelon
Registered User
DarZeelon's Avatar
Antonior,


It is not a .74; it is a .074 (cubic inches); roughly 1.2cc in metric displacement.
Old Nov 24, 2012, 12:27 PM
Antonior is offline
Find More Posts by Antonior
Registered User
Antonior's Avatar
Quote:
Originally Posted by DarZeelon View Post
Antonior,


It is not a .74; it is a .074 (cubic inches); roughly 1.2cc in metric displacement.
Thanks for the precise statement


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Mystery Engine Identification Chuck12563 Engines 2 Jul 01, 2008 10:52 AM
Help! Need some help identifing a 4S engine. sneasle Engines 5 Apr 30, 2007 10:04 PM
Help! Fox Engine Identification Hydrocat Engines 9 Dec 16, 2006 12:14 AM
Discussion Engine Identification Part 1 poppymann Engines 4 Oct 17, 2006 03:09 PM
Help! Vintage OS and Enya 2s Engines identification stebar Engines 4 Jul 06, 2006 03:26 PM