The new Double Horse 9116 Heli Thread - Page 392 - RC Groups
Thread Tools
Jul 09, 2015, 06:11 AM
Registered User
I am trying to understand what might have broken. The tx controls throttle through the pcb. I replaced the pcb. Does that mean I broke the tx somehow? Is there something inside the tx that I should look at or test?
Sign up now
to remove ads between posts
Jul 10, 2015, 10:05 PM
Registered User
9116 has horrible TX. I stoped flying mine a couple years ago due to TX was so sloppy. Heli flew ok, but TX has alot of dead spots. You might check to see if you are in right mode. I think it can be mode 1 also. Mine would reverse contols on its own and had to check it all the time. Reverse ch's etc.
Jul 11, 2015, 12:23 AM
Registered User
I am in the right mode. Everything works I just cant stop the rotor. This is my first heli and I am not ready to move up yet. I am just looking for suggestions that would cause me to not be able to not stop the main motor
Jul 15, 2015, 04:07 AM
Registered User
Stomper 103,

This is probably a dumb question but is the throttle trim tab all the way down to the bottom position?
Jul 15, 2015, 05:48 AM
Registered User
Yes it is. I also reset all the settings on the tx according to set up settings. Then I split the tx in half hoping to find a wire off or something, I have never had one apart before but could find anything obviously wrong.
Jul 19, 2015, 06:13 AM
Registered User
kashifsmalik's Avatar
Quick question: Can the PCB take a 3S battery (that is, 11.1/12.6 volts vs. 7.4/8.4 volts)?
Jul 19, 2015, 09:53 AM
Wicked, tricksy, false!
mikefromgermany's Avatar
No.
Jul 21, 2015, 06:18 AM
Registered User
I ran the the throttle trim tab all the way and all the way down 3 times and now it is working fine Thanks Guys
Jul 23, 2015, 12:11 PM
Registered User
I have my 9116 from past. flys ok for what it it. If you have interest let it go for $20.00/ plus postage. I have extra new tail assembly/ extra set of blades. Battery is most likely tired. Repack into smaller box. great for parts or fly. i lighten excess plastic from bottom . Hurts nothing and made heli a little lighter. Heli has not been crashed and flys.
Aug 12, 2015, 06:39 PM
Registered User
Jerm357's Avatar
Quote:
Originally Posted by lonerider
can anyone tell me where I can find servos for the double horse 9116 anymore I looked on Amazon they don' have any, are parts becoming hard to find for that model
These Emax servos fit in the 9116...
http://www.banggood.com/Emax-ES9051-...l-p-79261.html



Oct 28, 2015, 11:51 AM
An RC Yachtie.
Rajah235's Avatar
Hi,
Very late but if you're still looking for them, try HK...
> http://www.hobbyking.com/hobbyking/s...AL&idCategory=
They are a direct replacement & fairly cheap.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New Double Horse 9116 RC Helicopter 4 Channel 2.4Ghz RTF with Gyro thercguy Electric Heli Talk 4 Apr 16, 2013 03:13 AM
Question Double horse 9116 Heli capo58 Beginner Training Area (Heli-Electric) 3954 Dec 26, 2012 07:40 AM
Discussion New to Heli's - Double Horse 9116 or 9118 kamma1124 Coaxial Helicopters 19 Sep 28, 2012 10:08 PM
Question Starting with a new Double Horse 9116 Scotticism101 Beginner Training Area (Heli-Electric) 3 May 15, 2012 01:36 PM
Discussion 9116 Double Horse Daza1964 Beginner Training Area (Heli-Electric) 1 Mar 26, 2012 09:22 AM