Turnigy Talon V2 - Part Deux! - RC Groups
Thread Tools
This thread is privately moderated by mark_q, who may elect to delete unwanted replies.
Nov 18, 2012, 11:43 PM
KG7TTQ - Las Vegas
mark_q's Avatar

Turnigy Talon V2 - Part Deux!

After flying, crashing and learning a whole bunch using this platform, I have rebuilt it with some customization.

(Re)Build Notes


Last edited by mark_q; Jan 11, 2016 at 08:21 PM. Reason: Fixed link
Sign up now
to remove ads between posts
Dec 16, 2012, 04:20 PM
aka JetMan Joe
MCSGUY's Avatar
Nice job cutting out the replacement lower frame plate, where did you buy the CF plate?
Dec 16, 2012, 04:36 PM
KG7TTQ - Las Vegas
mark_q's Avatar

Hobby King has the worst shipping but the best prices for small stuff. So if I have to place an order there, I include one or two of these "just to have around". It's really high quality stuff and very easy to work with. Now, if only I had a CNC...

1mm x 300mm x 100mm ($10.79)

1.5mm x 300mm x 100mm ($13.51)

2mm x 300mm x 100mm ($17.95)
Dec 16, 2012, 05:08 PM
aka JetMan Joe
MCSGUY's Avatar
Thanks, those are good prices.

I got a couple of "smart" servos that would be ideal for building a CNC router. They run about $1600 each with the integral controller module installed. Search www.jvl.dk for the Mac141's to get details. I also have the software written that supports basic control and point to point motion. What I don't have is the code to fill the "points buffer" function that enables interpolated multi axis motion. If your able to write the code to accomplish that and build an app for CNC routing I'll give you a functional 2 servo bench setup and some code to get you started if you'll build the app for both of us.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Turnigy Talon Quadcopter V2 Build rubenhak Multirotor Drone Talk 17 May 18, 2014 01:01 PM
Discussion Turnigy Talon V2, weight help plz .Joel Multirotor Drone Talk 2 May 12, 2012 09:50 AM
Help! What prop for Turnigy SK3 3530 with Talon V2? MitchellY Multirotor Drone Talk 2 Apr 28, 2012 02:00 PM