Thread Tools
Nov 18, 2012, 03:12 AM
Registered User

UM Stryker and dx6i setting help

Hi All.

Please help - I bought a UM Stryker yesterday and I cant program too the DX6 correctly.
Does anybody have any settings and what mixes are needed ?

Many Thanks

Sign up now
to remove ads between posts
Nov 18, 2012, 11:36 AM
Power Wheels Guru
UNGN's Avatar
You'll need to change the wing type to Delta/Elevon, then switch the aileron plugs on the Brick (this only applies to the DX6i... all other radios don't need a plug swap)

After that, it should work normal.
Nov 18, 2012, 01:52 PM
Have fun
airpower's Avatar
Read the manual, it will tell you what you need to do.
Nov 18, 2012, 02:22 PM
Registered User


Thanks for the advise - I wll have this in the air soon now..


Nov 18, 2012, 03:25 PM
Have fun
airpower's Avatar
There is a mix if you want full throw, dont know the particulars but i think its aileron to aileron 100%, and elevator to elevator 100%.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion dx6i settings for UM T-28 Trojan dge Beginner Training Area (Aircraft-Electric) 10 Jul 02, 2012 09:10 PM
Help! need dx6i settings for UM t-28 trojan dge Scratchbuilt Indoor and Micro Models 3 Jul 01, 2012 08:21 PM
Discussion Need help setting up stryker with dx6i. John S. Electric Plane Talk 2 Mar 28, 2012 03:35 AM
Discussion Need help setting up stryker with dx6i. John S. Beginner Training Area (Aircraft-Electric) 6 Mar 27, 2012 07:12 PM
Discussion Need help with DX6I and Stryker settings andre747 Pusher Prop Jet Models 2 Mar 08, 2009 10:06 PM