Armattan Quads Price List and FAQ - Page 41 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by bobepine, who may elect to delete unwanted replies.
Dec 14, 2012, 11:22 AM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by Borister
how long with this kit fly for? RXR DIY Kit- 205$
what battery do you recomend for longest flight time?
what would be the max flight time with a gopro, fpv setup, fpv battery and a gimbal (total 315g)?
would the 335 or 400 be better suited to my needs?
My quads are acro quads. Wgike they have a huge amount of thrust, they can easily lift a Go pro but flight time will be short. Flight time already is quite short given they are quads built to perform.

Please read the first page of this thread and come back with any questions you may have.

Best,
Chris
Sign up now
to remove ads between posts
Dec 14, 2012, 11:24 AM
Trader Rating: 206
bobepine's Avatar
OK guys, I added all the recent orders to the first page order list. Please let me know if your order is missing or incorrect. I'm disorganized as usual....
Dec 14, 2012, 11:41 AM
Trader Rating: 5
Team Armattan
Quote:
Originally Posted by bobepine
OK guys, I added all the recent orders to the first page order list. Please let me know if your order is missing or incorrect. I'm disorganized as usual....
#46 Chris should be marked Paid!

Thanks
Thurmond
Dec 14, 2012, 11:49 AM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by T3PRanch
#46 Chris should be marked Paid!

Thanks
Thurmond
Done.

Geez, too bad no one is as disorganized as me. Be nice to get paid twice.

Best,
Chris
Dec 14, 2012, 12:03 PM
Trader Rating: 2
Registered User
Payment sent.Let me know when you get it.Thank you.#48 Tmelvin2012.
Dec 14, 2012, 12:18 PM
Trader Rating: 2
Look out! Mayday! Mayday!
Chingus's Avatar
Quote:
Originally Posted by Th3UmBrA
FYI...Chris' email address is in the very first post under order procedure...Its step #6. You would have to actually read the first post to find this ;-).
Yes, he has his email posted but that's not his Paypal email address.. Wait for him to contact you with with the correct addy before sendin payment.
Dec 14, 2012, 12:32 PM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by Chingus
Yes, he has his email posted but that's not his Paypal email address.. Wait for him to contact you with with the correct addy before sendin payment.
That is correct. And PLEASE guys... Follow the ordering instructions posted on page 1... I had to chase 3 people for shipping addresses tonight.... This is a big waste of my time.

Thanks a lot.

Best,
Chris
Dec 14, 2012, 12:47 PM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by T3PRanch
Hi Chris,

I just noticed that the holes in the top plate of your new CNC 254 are triangular. I like this a lot since it will now allow an XT60 connector to pas through the hole to prevent routing the battery lead over the side of the center plates and allows extra space for esc wiring routing for a cleaner look. I hope this is planned for future builds and kits.

Thurmond
Hi Thurmond,

Nicely spotted.

Here's the CNC V2 design that is soon to replace the V1 model currently sold in this thread. The V2 center plates are compatible with the V1 center plates, by the way. This model (shown below) will be up for grabs in about a week.

The center plates on the V2 model have the mounting holes for the Open Pilot FC as you can see, as well as the KK2/Multiwii mounting holes.

I guess tech69 will have to scrounge to find these parts so he can try to copy them, too! Good luck to him.... I'll be posting a thank you thread in traders talk about him soon...

Best,
Chris.

Dec 14, 2012, 03:48 PM
Trader Rating: 5
Registered User
Birdman4498's Avatar
Chris, will the 355 also be updated to a V2 and be using these new centre plates?

Dave
Dec 14, 2012, 05:59 PM
Trader Rating: 5
Team Armattan
I believe that all of Chris's models will have the new plates!

Beautiful and functional!

Thurmond
Dec 14, 2012, 06:28 PM
Trader Rating: 1
Registered User
Chris,
I'd like to order a 355 CNC DIY kit with the black center plates if you are accepting orders.
Dec 14, 2012, 11:31 PM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by T3PRanch
I believe that all of Chris's models will have the new plates!
Thurmond
What he said.

Best,
Chris
Dec 14, 2012, 11:32 PM
Trader Rating: 206
bobepine's Avatar
Hi Ron,

You're on the list. Hope your paypal is ready because I'll have that in the mail on Tuesday. I'll contact you to request payment when it's ready.

Thanks!

Best,
Chris

Quote:
Originally Posted by Ron244
Chris,
I'd like to order a 355 CNC DIY kit with the black center plates if you are accepting orders.
Dec 14, 2012, 11:39 PM
Trader Rating: 2
Registered User
Quote:
Originally Posted by Banjo5
...
cheers,
Andrew

PS. Bob, how much for a CNC quad kit minus the ESC's and KK2 (happen to have both in "stock" already).
Assuming that this is the right place to ask questions before ordering?

What motors and props are you using on this one? Just want to make sure F20's would do the job.

cheers,
Andrew
Dec 15, 2012, 12:06 AM
Trader Rating: 206
bobepine's Avatar
Quote:
Originally Posted by Banjo5
Assuming that this is the right place to ask questions before ordering?

What motors and props are you using on this one? Just want to make sure F20's would do the job.

cheers,
Andrew
Hi,

The F20 will work fine. I used 2822 2600 and 2800KV. I like the 2826s but flight time is shorter- More oumff, though.

Props can be 8 or 9 inch, though I would not put 9 inch on the 2600kv motors.

Best,
Chris

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Armattan Quads Announcement: Upgrade Parts bobepine Product Announcements 20 Feb 27, 2016 09:07 AM
Sold RX Ready Custom Sports Quad: Armattan 362 bobepine Aircraft - Electric - Multirotor (FS/W) 9 Sep 24, 2012 02:24 PM
Sold Open Pilot CC quad with aluminum Frame/ leds.Update listing 18 Jan price lowered tc3wins Aircraft - Electric - Multirotor (FS/W) 8 Jan 18, 2012 08:35 PM
Sold Quad frame for sale!!! previously listed. as full quad. tc3wins Aircraft - Electric - Multirotor (FS/W) 3 Aug 25, 2011 09:56 AM