belated mCX2 canopy and CF tail boom LED blog entry
Never did get around to adding this here to my blog...
adding the LEDs back to the mCX2 after doing the Carbon Fiber Tail Boom "upgrade"...
I'm taking the lazy way out on this one and just putting links to stuff I already wrote up about it in the forum, hopefully in chronological order...
Last edited by North_of_49; Nov 16, 2014 at 09:29 PM.
Thanks for the kind words.
Just want to add that the reason I cut and spliced in sections of wire to lengthen them is because I didn't want to solder directly on the little thin wafer pc boards the stock LEDs are surface mounted on... the LED is mounted really close to one of the wire solder pads and I did dislodge and lost forever one of the tiny SMD LEDs on my first try and had to buy a new light kit. I did buy new SMD LEDs locally and tried to fix it but at this size they're just too tiny to work with and try to solder onto the board.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted||Align 450 SE tail belt(s), CF tail booms, other email@example.com||Aircraft - Electric - Helis (FS/W)||1||Nov 08, 2012 06:34 PM|
|Discussion||Source for CF Tail Booms?||acetech09||Electric Sailplanes||3||Sep 05, 2012 01:58 PM|
|Question||how to fix this? cf tube tail boom||getmeoutofiraq||Hand Launch||9||Jun 23, 2012 02:22 AM|
|For Sale||Superb Blade MCX2 BNF w/carbon fiber tail boom, extra swash plate ($68 shipped)||flyrtim||Aircraft - Electric - Helis (FS/W)||0||May 13, 2012 08:21 PM|
|Sold||Walkera 4#3B 2.4Ghz RTF w/4G3 canopy solid CF tail boom,tuff skids||Z06 Tony||Aircraft - Electric - Helis (FS/W)||4||Nov 30, 2008 12:34 AM|