V-tail with OSD Pro-- possible? - RC Groups
Thread Tools
Nov 12, 2012, 08:05 AM
Registered User
wazoo22's Avatar

V-tail with OSD Pro-- possible?

Tried two external mixers, with elevator through the osd pro and rudder direct. One worked, but had a big lag time. The other worked, but twitched, as if it were counting to seven, then started over. some weird timing issue.

How can I use a v-tail with the osd pro?
Sign up now
to remove ads between posts
Nov 12, 2012, 01:40 PM
billpa's Avatar
Hi, I would recommend posting your v-tail question to the OSD Pro thread here, listing the types of mixers you have tried, brand of model & radio, etc. Chances are someone has set up the same config before.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted EzOSD, OSD PRO with GPS or Dlink OSD Juninou FPV Equipment (FS/W) 1 Oct 23, 2012 03:35 PM
Discussion Eagle Eyes Ground Station with other OSD than OSD Pro ? BillyJo FPV Talk 3 May 26, 2012 10:56 AM
Discussion Updating/flashing OSD Pro firmware without data logger, possible? sleziak Eagle Tree Systems 1 Jan 10, 2012 01:50 PM
Sold Sharon Pro 3.7 V Tail with additional X Tail fuse and stabs lestingoy Aircraft - Sailplanes (FS/W) 7 May 23, 2010 11:22 PM