Those are fancy pants wheels
Torn between the new skywalker and this... Are the tail boom connections to the wing strong? Much waggling?

Where is the center of gravity exactly. Is there any testing.

95cm from leading edge. just before servo wire

Originally Posted by Locko

95cm from leading edge. just before servo wire

my SH 70mm

fix tail, Increase stability

yeah, more stable... tomorrow fly

Originally Posted by Daemon

Nothing complicated about my gear layout. I've been out 2.5 miles with this setup without issues,
and if I need to go long range, I'll probably put the RC Rx antenna some distance out on the wing.

ian

have you found a good way of mounting the RC RX antenna?
clearly out on the wing or back on the tail would be best ... but i haven't figured out how to do that if I want to be able to transport it with wing and tail detached from the body.
Any ideas?

Arkbird osd waypoint autopilot ....

set F/S to waypoint mode, turn off my radio when my SH after launching....

Originally Posted by skyhunter_1

my SH 70mm

Move it back some and you'll notice a difference. I was almost at the servo wire before I lost the other bird in a flyaway.

Originally Posted by skyhunter_1

yeah, more stable... tomorrow fly

that might get ripped off on a bad landing

Originally Posted by typicalaimster

Move it back some and you'll notice a difference. I was almost at the servo wire before I lost the other bird in a flyaway.

move back cg for my heavy SH is not good, I tried before it is not stable. maybe I love fly any planes with front CG.

Originally Posted by rcmonster99

that might get ripped off on a bad landing

my flying place is grass,

Originally Posted by subsonic

No comment on your country's VAT, but you ARE on the other side of the world bro...

From you, yeah. But from China? Finland is not much farther from China than Australia. The US are almost double as far from China than FIN is...

Hey guys, How does this look for a nose gear? It is fairly priced and looks sturdy. The only concern is how do we mount it and we need a main gear that is the same size to keep the plane level on the ground.

Link:
http://www.hobby-lobby.com/shock_abs..._1398_prd1.htm

Originally Posted by skyhunter_1

move back cg for my heavy SH is not good, I tried before it is not stable. maybe I love fly any planes with front CG.

Have to reduce elevator throws when you move the CG back. 70mm is severely nose heavy
and inefficient.

ian