Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 08, 2012, 09:05 PM
fly by night
BCSaltchucker's Avatar
Quote:
Originally Posted by typicalaimster
Hmm looks like they are out of stock. You guys bought up all the planes didn't you! I'd probably convert this over to a A tail vs the H tail they have going on. I'll keep an eye out for this plane and hopefully it'll come back in stock.

Sadly I'm a sucker for TBP's
their site says this
Quote:
First batches will be available from 15.11.2012
Nice looking kit.

I have thought of turning my Zephyr2 into a 'Boomer type' like this - but without a fuselage.
Sign up now
to remove ads between posts
Nov 09, 2012, 06:38 AM
TBS Crossfire or DragonLink?
BCsaltChuck

in terms of aeroflight dynamics, what is the point of dual boom design, as opposed to regular airplane single boom with Hori/Verti tail. Is this more efficient?

I see that countries around the world prefer this twin boom pusher setup for 'drones'....

What about for us Hobbiest that prefer efficient FPV plane for long fligh times and glide factor.
Nov 09, 2012, 07:35 AM
Registered User
typicalaimster's Avatar
The twin boom design breaks down into a smaller package vs your standard plane. It's a matter of portability. To me it's about looks.
Nov 09, 2012, 07:41 AM
KISS
hefest's Avatar
Than there is line of thrust issue with easy star like configurations compared to twin boom.
Nov 09, 2012, 08:58 AM
TBS Crossfire or DragonLink?
hefest,

what do you mean 'easy star' like configuration? pusher type?

So, the Twin Boom is just for transport/breaking down easily?

Also,
how hard will this be to convert to "A" tail (opposite of a 'V' tail).?
Nov 09, 2012, 10:41 AM
KISS
hefest's Avatar
Quote:
Originally Posted by LexusFPV
hefest,

what do you mean 'easy star' like configuration? pusher type?

So, the Twin Boom is just for transport/breaking down easily?

Also,
how hard will this be to convert to "A" tail (opposite of a 'V' tail).?
Yes, I mean pusher configuration like easy star.
In such configuration thrust line is usually tilted to compensate for the off-center position of motor. With this configuration that's not the case and I see it as advantage. Also you can fit quite large prop on this one.
Nov 09, 2012, 02:12 PM
Registered User
typicalaimster's Avatar
Quote:
Originally Posted by LexusFPV
Also,
how hard will this be to convert to "A" tail (opposite of a 'V' tail).?
Converting to an A tail is rather easy. I'd suggest just using some balsa and whacking some tails out yourself. The material is light weight and durable. The nice part about the booms is it allows for a larger prop. I'd love to run a 11x7 on my Skywalker but the tail boom restricts the size of prop. With a TBP you're limited to the space between the boom.

The magic number for a A-Tail from what I remember is 110-120 degrees. I'll attach the spread sheet I was using when I was designing TBP's back in the day. I'd love to start designing some TBP's again.. Just don't have anyone that I know that can make cheap molds.
Nov 10, 2012, 05:54 AM
Registered User
Twin boom allows for large prop / low kv motor, which always was the key of an efficient propulsion.
I would provide a foldable prop, though.
Nov 10, 2012, 04:18 PM
Registered User
Damm, another to add to the list.
Nov 10, 2012, 04:20 PM
Registered User
eroeder's Avatar
What are the specs on it?

What are the recommended motor/servo combo?
Last edited by eroeder; Nov 12, 2012 at 01:42 AM. Reason: edit
Nov 12, 2012, 01:43 AM
Registered User
eroeder's Avatar
I see there are two threads on this...
https://www.rcgroups.com/forums/show....php?t=1767087
Nov 12, 2012, 06:35 AM
TBS Crossfire or DragonLink?
eroeder, you asked whats a recommended motor/prop etc....

Someone mentioned that with pusher prop configuration,
its more efficient with "Low Kv motor, and big ass prop"
for very low cruising amps..... so it flight times will be longer:-)
Nov 12, 2012, 09:39 AM
Registered User

Skyhunter recommended setup


Quote:
Originally Posted by eroeder
What are the specs on it?

What are the recommended motor/servo combo?
T-Motor AS2820(3542) KV920 motor
11x7 or 12x6 APC propeller
T-Motor 60A ESC
8-15g metal digital servo x3
4S 14.8V 5000-25000mah li-po battery


Skyhunter - New 1.8m twintail FPV/UAV EPO platform Ground footage (1 min 33 sec)


Skyhunter - New 1.8m twintail FPV/UAV EPO platform Flight video (0 min 0 sec)
Last edited by fpvmania; Nov 12, 2012 at 10:04 AM.
Nov 12, 2012, 11:25 AM
Registered User
ashdec87's Avatar
The specs say it comes with a 12mmx 10mm spar. That might be ok, depends on how the wing loads I suppose. Definitely looks like a good plane at first glance. Like I said in the other thread, it needs landing gear. Otherwise the tail might get damaged on landing. Secondly, the FPV camera needs to sit higher up, so the deck is clear for a HD camera.
Nov 12, 2012, 11:40 AM
TBS Crossfire or DragonLink?
FPVmania

Can You post vids' of this plane landing?....so it clears up that the twin booms
are strong as advertised.... also, it will show how the twin 'FOAM' vert/ horizontal stabilizers
in the rear of the plane will hold up.....

I ask because, the grass around here is too long for ROG take off, and ROG landings'....
(I don't need landing gears)....a modified 'skid' will be cool though.
Something SIMPLE!!!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review FOX ST-Model /Kyosho /Hype /Ripmax 1.8m /71" EPO PnP/RTF BL/ Glider McMoron Electric Sailplanes 428 Dec 03, 2015 01:43 AM
Discussion EPO Global Hawk, possible fpv platform? Black Baron FPV Talk 4 Apr 04, 2012 10:19 AM
Discussion Eagle Wing EPO FPV platform - 150cm fidzi2002 FPV Talk 16 Nov 16, 2011 10:15 AM