T-Motor MT2814-10 770KV and 10 propellers - Efficiency test
Thanks to FPV Model to have made this test possible with his offer to provide four free motors to testers.
T-Motor MT2814-10 770KV 260W 25A motor working on 3S and 4S,
10 propellers: APC 10x4.7, 11x4.7, 12x3.8, 12x4.7 and 13x4.7, GemFan 10x4.5, 10x4.5 CF and 11x4.7, Graupner 10x5 and 11x5.
Test made with:
Turnigy Nano 3S 4000mAh 35-70C,
Hobbywing Pentium 30A, middle timing mode,
Turnigy Servo Tester and Micro Tacho, GWS Servo Tester MT-1,
Junsi PowerLog 6S Wattmeter - Soehnle scale - LogView software,
Friction free test bench, right angle 200mm arms.
- Mid throttle, 50%, usually used to hover
- WOT, 100%, maximum power and thrust
Turnigy Servo Tester offers mid throttle (1.5ms pulse width) and full throttle (2ms) positions.
Test results are below.
Best performing prop with this motor for hover is APC 12x3.8.
This combo seems perfectly suited to a 2kg quad, a 3kg hexa or a 4kg octo.
Pro: This motor is well made, balanced, silent and efficient. It should be durable.
Good efficiency means long running time.
Con: Somewhat heavy (135g with cables and prop adapter) and not cheap.
4S battery doesn't seem suitable, max power allowed being quickly exceeded.
To compare props' efficiency data with other motors, see my previous tests:
- Three motors tested: https://www.rcgroups.com/forums/show...1388583&page=3
- Five motors tested: https://www.rcgroups.com/forums/show...1388583&page=4
- Park480 and five propellers: https://www.rcgroups.com/forums/show....php?t=1557506
- DT700 and 24 propellers: https://www.rcgroups.com/forums/show....php?t=1594904
- Park450, Park480 and 10 propellers: https://www.rcgroups.com/forums/show...388583&page=11
- DT750 and 7 propellers: https://www.rcgroups.com/forums/show....php?t=1708731
Last edited by Mortimer; Nov 07, 2012 at 03:46 PM.
cronalex is looking for combos giving 420g thrust (2500g/6) or more at 50% throttle for his hexa.
Efficiency graphs of 4006 and 4822 are nice but don't seem to be the answer he is waiting for.
2500 or 3000g, MT2814 or MT2216, 10 or 11 turns, 3S or 4S, and after which props?
Play with eCalc, it will help you to make up your mind.
Hover throttle must be between 45 and 50%.
Battery capacity has a direct influence on flight time.
Last edited by Mortimer; Mar 04, 2013 at 09:15 AM.
Hello I am suffering here with my multi-rotor initially my setup was a octocopter with MT 2814-10 770 kv + 4S 5000mAh 20-30c + + ESCs hobbywings flyfun 30A controller WK-M. All was seemingly well until a bug in the controller and had several falls from inesplicáveis .. Now after losing an engine, built a hexacopter with what's left. I need to carry a Canon 5D Mark II, but not consifo fly more than 1.5 minutes and the hexa down alone .... evo give this my setup? Could you help me?
thanks , and sorry for my english precarious ...
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Data||DT750 and 7 propellers - Efficiency test||Mortimer||Multirotor Drone Talk||26||Dec 06, 2014 12:28 PM|
|Sold||Tiger Motors mt2814-10 770kv||pmp80||Aircraft - Electric - Multirotor (FS/W)||4||Oct 20, 2012 07:57 AM|
|Sold||NEW PRICE ! ONLY 4 LEFT Mt2814-10 770kv||pmp80||Aircraft - Electric - Multirotor (FS/W)||2||Oct 04, 2012 08:47 AM|
|Question||Tiger Motor MT2814 770kv||squigg||Multirotor Drone Talk||0||May 08, 2012 08:51 AM|
|Sold||NEW 9 x MT2814 770KV motors||tdmaros||Aircraft - Electric - Multirotor (FS/W)||2||Dec 16, 2011 04:41 AM|