Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Nov 05, 2012, 04:45 PM
rimshotcopter is online now
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
Awesome and thank you.

BTW, I placed an order for one piece for evaluation also shared the link. Hope you did not mind.
Sign up now
to remove ads between posts
Old Nov 05, 2012, 05:46 PM
HansAuf is offline
Find More Posts by HansAuf
Pass me some zip-ties!
HansAuf's Avatar
Quote:
Originally Posted by witespy View Post
that is a 3DR Radio. I take my netbook out to the field and have total control over the PID. EXPO, and RCRate settings so you can dial your quad exactly how you like it. Then I would take off until you improve and want to unleash the beast more.

http://witespyquad.gostorego.com/fli...it-915mhz.html

you and also do this with Bluetooth, but the range is limited, and you might have to keep re- reconnecting .
Yep. They work fantastic. I've been using them for a while for robotics stuff, but I just adapted it to use with a different board on Saturday and it literally saved me hours of time as an alternate to plugging in each time or waiting for bluetooth to reconnect after wandering out of range. I highly recommend getting these and Witespy's price on his store is a lot less than most of the resellers. You have some resellers beat by $25 (US).
Old Nov 05, 2012, 07:03 PM
AlanFlorida is offline
Find More Posts by AlanFlorida
Registered User
AlanFlorida's Avatar
Quote:
Originally Posted by HansAuf View Post
Yep. They work fantastic. I've been using them for a while for robotics stuff, but I just adapted it to use with a different board on Saturday and it literally saved me hours of time as an alternate to plugging in each time or waiting for bluetooth to reconnect after wandering out of range. I highly recommend getting these and Witespy's price on his store is a lot less than most of the resellers. You have some resellers beat by $25 (US).
Hello HansAuf! Hope all is great with you. It was nice seeing you at Hodges in Georgia.
Old Nov 05, 2012, 07:24 PM
HansAuf is offline
Find More Posts by HansAuf
Pass me some zip-ties!
HansAuf's Avatar
Quote:
Originally Posted by AlanFlorida View Post
Hello HansAuf! Hope all is great with you. It was nice seeing you at Hodges in Georgia.
Yeah man. Everyone reading this needs to make sure to be there next year (cough, cough.. paul). I'll post back when I get this and test it out some. You just cant beat the Multiwii for aerobatics. Just got a Sony NEX5N that takes some wicked video, so maybe I'll grab some video.
Old Nov 05, 2012, 07:44 PM
AlanFlorida is offline
Find More Posts by AlanFlorida
Registered User
AlanFlorida's Avatar
Quote:
Originally Posted by HansAuf View Post
Yeah man. Everyone reading this needs to make sure to be there next year (cough, cough.. paul). I'll post back when I get this and test it out some. You just cant beat the Multiwii for aerobatics. Just got a Sony NEX5N that takes some wicked video, so maybe I'll grab some video.
You will love it. We all need to get together here locally and fly some Quad Combat with these boards
Old Nov 05, 2012, 11:19 PM
Blucross is offline
Find More Posts by Blucross
Gravity is a cruel mistress...
Blucross's Avatar
Sweet looking little board, I'm in for one for a sport quad.
RCG Plus Member
Old Nov 06, 2012, 10:28 AM
AlanFlorida is offline
Find More Posts by AlanFlorida
Registered User
AlanFlorida's Avatar
Quote:
Originally Posted by Blucross View Post
Sweet looking little board, I'm in for one for a sport quad.
We will need to get all of us Florida guys together to do some Sport Quad Flying with our Flip Boards
Old Nov 06, 2012, 06:13 PM
witespy is offline
Find More Posts by witespy
Registered User
Here is a test flight video of the ready to fly FLIP quad, with the Flip FC. The arco settings are set mildy aggressive. Great thing is you have autolevel switch, so when you shoot way up in the sky, you know your not going to nose dive coming home. it is a life saver, or not this quad does not care.

Flip quad default settings (2 min 42 sec)
Old Nov 07, 2012, 02:57 PM
AlanFlorida is offline
Find More Posts by AlanFlorida
Registered User
AlanFlorida's Avatar
Quote:
Originally Posted by witespy View Post
Here is a test flight video of the ready to fly FLIP quad, with the Flip FC. The arco settings are set mildy aggressive. Great thing is you have autolevel switch, so when you shoot way up in the sky, you know your not going to nose dive coming home. it is a life saver, or not this quad does not care.

http://www.youtube.com/watch?v=S-xfPc3Vwg8
The first part of the video the wind was very strong!! I remember that day, it was 15-20mph+.
Old Nov 07, 2012, 09:07 PM
pug398 is offline
Find More Posts by pug398
Registered User
got it setup for a gimbal controller pretty quick and the front label does match the front for tilt when Flyduino MPU define is used. Only thing that was a hitch briefly was the programming usb socket is a micro not a mini. Got it programmed just as soon as I found out my Galaxy S3 usb cable fit it. Lot nicer than the board that I had just paid $5 more for
Old Nov 07, 2012, 10:09 PM
witespy is offline
Find More Posts by witespy
Registered User
Quote:
Originally Posted by pug398 View Post
got it setup for a gimbal controller pretty quick and the front label does match the front for tilt when Flyduino MPU define is used. Only thing that was a hitch briefly was the programming usb socket is a micro not a mini. Got it programmed just as soon as I found out my Galaxy S3 usb cable fit it. Lot nicer than the board that I had just paid $5 more for
sounds good.

I will upload the default file that is loaded the the board.

I feel #define MPU6050_LPF_42HZ should be on for smaller frames, and it works great.
Old Nov 08, 2012, 09:40 AM
AlanFlorida is offline
Find More Posts by AlanFlorida
Registered User
AlanFlorida's Avatar
Quote:
Originally Posted by pug398 View Post
got it setup for a gimbal controller pretty quick and the front label does match the front for tilt when Flyduino MPU define is used. Only thing that was a hitch briefly was the programming usb socket is a micro not a mini. Got it programmed just as soon as I found out my Galaxy S3 usb cable fit it. Lot nicer than the board that I had just paid $5 more for
Great to hear!! Man you got that fast
Old Nov 08, 2012, 03:13 PM
JWinNewPhila is offline
Find More Posts by JWinNewPhila
Registered User
JWinNewPhila's Avatar
Got mine today! It's even smaller than I expected....

Think I'm going to put it on a seriously over powered 330mm - 350mm size quad with 8" props and let the fun begin!

Do you guys think that I should enable the #define MPU6050_LPF_42HZ since it will be on a smaller sized frame?

Also... what rates are you guys using to do acro? (I usually use the KK2 for acro and just use the stick scaling)
Old Nov 08, 2012, 04:20 PM
witespy is offline
Find More Posts by witespy
Registered User
Quote:
Originally Posted by JWinNewPhila View Post
Also... what rates are you guys using to do acro? (I usually use the KK2 for acro and just use the stick scaling)
yes. I think you should always start with the LPF on 42HZ is a good start. then start knocking it down.

for starting PID settings defaults are great.

but you need to change these settings if you want mild flipping action, then move up from there; Make sure you setup your Autolevel on a switch, so you have both modes rocken for two awesome fly styles .

RCRate : move from .90 up to 1.30
RCExpo : move from .60 Down to .30
YAW RATE : move from 0 up to . 50 .
Last edited by witespy; Nov 08, 2012 at 04:30 PM.
Old Nov 08, 2012, 07:29 PM
JWinNewPhila is offline
Find More Posts by JWinNewPhila
Registered User
JWinNewPhila's Avatar
Quote:
Originally Posted by witespy View Post
yes. I think you should always start with the LPF on 42HZ is a good start. then start knocking it down.

for starting PID settings defaults are great.

but you need to change these settings if you want mild flipping action, then move up from there; Make sure you setup your Autolevel on a switch, so you have both modes rocken for two awesome fly styles .

RCRate : move from .90 up to 1.30
RCExpo : move from .60 Down to .30
YAW RATE : move from 0 up to . 50 .
Thanks for the tips!

After seeing how good my Quadrino flys I had to give this thing a try for acro. Unfortunately I have to work 12's all weekend starting tomorrow so no fun for me until Monday. (And of course it's suppose to be like 65-70 and sunny all weekend! Been in the 30's to 40's all week.)


Thread Tools