Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 31, 2012, 07:32 PM
SCALEFAN is offline
Find More Posts by SCALEFAN
Done it all
Discussion

My conversation(s) with Mr. ET "Drama"


This thread is being started as a result of today's email exchange with Mr. ET. I should feel honored because most hobbyists don't have the honor of communicating with Mr. ET. I even communicated with him by phone several times, a supreme honor. He is a funny guy.

The following is my idea of an apology that Mr. ET keeps requesting. He has requested this several times over over a 6 year period. I feel that he finally needs closure on the matter.

History of Mr, ET and I goes back 6 years, we don' like each other and I carry a grudge against him. (reasons too long to type here and full of drama) That is approximately when Mr. ET got banned...lots of grudges, lots of members complaining.

Whenever I mention Mr. ETs real name I get a phone call or an email requesting retraction, post deletion and apology. This time I decided to comply, here it is:

I never bought a ET sold aircraft, so I can't comment on the quality directly.. However I did comment during a build thread posted along time ago by Punky who had a real problem with his kit. I thought that it was not of very good quality and it showed during the build. It turns out that Mr. ET thinks that it should be all about Punky, lousy build, nothing wrong with an ET kit, nobody should comment...My mouth is now sealed. Free speech is obviously wrong here.

I also commented when reading some negative posts here the last few days hinting that the fingerprints led back to Mr. ET. Mr. ET tells me that it was never him and asks for an apology. Apology Granted ( who really knows who posted?)

Also Mr. ET wanted me to apologize for mixing him up with Kirk, Curtis and Kirk sound the same to me. The person that told me the story speaks and writes with a heavy accent. (you know who) I cannot hear that well and in one conversation mixed the two up. Glad all is well with Kirk, from what I now know he is one heck of a good builder. I think that Curtis might also be a good builder, I like the picture of him and the flying Whale. But, he won't sell anything to me.

In summary, over the years I have discovered that in past years Mr. ET has written many articles that have have helped builders and contributed greatly to the hobby, he is a prolific writer and sometimes very funny. I suspect that at some point he was converted over to the dark side. I mentioned this today, and he again asked me to apologize. This is it. Mr ET, you are still one of the good guys.

Other points he wanted me to make in my apology:

He never posted as an alias, he'll tell you if he sneaks in.
He is not behind the The RC true?? hate web site.


I think I covered most of it, thanks for your time and I hope that you enjoyed this as much as I did typing this public apology. From my new perspective, to know him is to love him. I apologize if I ever said anything that should be taken in a negative way.

You others, you're not off the hook, don't get too cocky. I will break your balls at the lest provocation. Keep on posting crap about beginner stuff like servo installation and you become a target. This is the big time EDF forum, don't forget it.
Sign up now
to remove ads between posts
Old Oct 31, 2012, 09:01 PM
PAPE is offline
Find More Posts by PAPE
Registered User
Who is ET?
Old Oct 31, 2012, 09:03 PM
SCALEFAN is offline
Find More Posts by SCALEFAN
Done it all
Easy Tiger RC Products, out of New York. Curtis M. owner. Most people here know who he is.

RCG will not let me post the complete name http://www.e??ytigermodels.com/
Old Oct 31, 2012, 09:38 PM
AIR SALLY is online now
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
ok good cause he has some nice planes..one of his customers had some when we went to /vegas a couple of weeks ago ....it was so nice it made me want to buy one . hope he did'nt get too ruffed up by the "Hcane".
Old Oct 31, 2012, 10:01 PM
pbusa1400 is offline
Find More Posts by pbusa1400
Team Horizon/ BVM jets
ET has always treated me right. I have one of his 90mm Panthers just about ready for a maiden. A couple friends down here fly a couple of his giant scale models. Everything has worked Good. Quality is good.


Pablo
Old Oct 31, 2012, 10:14 PM
racer1 is offline
Find More Posts by racer1
5kW Club
racer1's Avatar
A friend of mine purchased products once and only once. Easy tiger has a large number complaints. So each customer must make up their own mind.

I did find out that he started his own forum. It was like reading mirror mirror on the wall. I swear it looked like he was writing all of the reponses.

But he was really good at flaming ever vendor out there.

I always believe each person will get what is due to them.

Clay
Old Oct 31, 2012, 10:50 PM
SCALEFAN is offline
Find More Posts by SCALEFAN
Done it all
I didn't drink when I made this apology thread, however tonight I did eat all the Holloween candy cause we got no trick or treaters.

Watch Out, Flying High, no sleep tonight.
Old Nov 01, 2012, 03:07 AM
Jayray123 is offline
Find More Posts by Jayray123
OUCH!!!
Jayray123's Avatar
He told me to my face at E-Jets this year that my Mig-15 was junk. After I had flown it a few times. With a lot of guys marveling that it came from HK. I was asked multiple times to fly it again and again. Then later on afterward he tried talking me into a 90mm panther he was selling. I actually considered it, being that there would be no shipping issues and it the kit was there to inspect beforehand. But the more I thought about it, he basically called me stupid, and I don't know what I am doing, before he thought I might be a possible customer. I voted with my wallet. There will be another bird to buy.....

Jay
Old Nov 01, 2012, 06:55 AM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
2017 EDF Jet Jam, June 15-18
Robert Belluomini's Avatar
Jayray your Mig 15 flew fantastic at EJets. You had the perfect setup.
Old Nov 01, 2012, 07:01 AM
Jayray123 is offline
Find More Posts by Jayray123
OUCH!!!
Jayray123's Avatar
Thank you Bob, means a lot to be recognized at such an event.

Jay
Old Nov 01, 2012, 10:29 AM
JohnathanSwift is offline
Find More Posts by JohnathanSwift
Suspended Account
What in the world is this whole thread about?
Old Nov 01, 2012, 10:33 AM
SCALEFAN is offline
Find More Posts by SCALEFAN
Done it all
Johnathan, do you know how to read? Try reading the first post
Old Nov 01, 2012, 10:35 AM
JohnathanSwift is offline
Find More Posts by JohnathanSwift
Suspended Account
Sure, I read it, but maybe I should say what motivated all this?

Some of what you posted is clear, and some is less than clear, at least to me.

Hey, maybe I can't read, or don't have your capacity, but it is a forum and I am curious about your motives, or what set this in motion.

I mean, did you just wake up and say to yourself, "I'm going to post an apology on RCG cuz...."?
Old Nov 01, 2012, 03:50 PM
Sites is offline
Find More Posts by Sites
Registered User
This is my apology to Mr. Sleazy Tiger. http://www.funny-games.biz/pictures/...me-a-kiss.html
Last edited by Sites; Nov 06, 2012 at 05:33 PM.
Old Nov 01, 2012, 04:00 PM
2012boxterS is offline
Find More Posts by 2012boxterS
Suspended Account
Quote:
Originally Posted by Sites View Post
This is my apology to Mr. SleazyTiger. http://www.123rf.com/photo_9993678_f...le-finger.html
I must say you look exactly the way I imagined.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Cox Tailwind 40 convered to EP with Floats $400 LPU be69ar Aircraft - Electric - Airplanes (FS/W) 0 May 04, 2012 12:01 PM
Discussion Hey Mr. President. Where's my phone call? MtnGoat Life, The Universe, and Politics 49 Mar 08, 2012 09:45 AM
Discussion Can I use my FMA co-pilot ONE with my ET OSD pro? tconners Eagle Tree Systems 2 Apr 03, 2011 08:18 PM
Discussion Help with my ET OSD Pro & RangeVideo Tx harness Cralis FPV Talk 122 Sep 11, 2009 11:35 AM