Eagle tree pro rth - RC Groups
Thread Tools
Oct 31, 2012, 12:45 AM
Registered User

Eagle tree pro rth

Thank you for any help..

New to the osd. So far have it all working well apart from the rth...
Fail safe works, trim the throttle back works to actervate. It say it is in return to home mode but no servos move no throttle.

It just falls from the sky till it is 100 meters under ground.
(in sim mode)..

I don't have a flight stabilizer yet, dose it need one? I know it helps but i don't think its a must. Its on order anyway
Sign up now
to remove ads between posts
Nov 02, 2012, 08:00 PM
billpa's Avatar
Hi, in the simulator (as well as in actual use) you need to be at least approx 60' above the home point for the throttle aspect of RTH to work. Also note that you'll need to have run the "safety wizard" for RTH to work correctly.

Regarding using the stabilizer, it is strongly recommended. But, in the simulator, it does not really affect things, so the simulated model should fly around correctly if RTH is configured correctly.

If you still have problems, can you post your OSD Pro config file (.TXT) and we can check your configuration. This is saved by clicking "Save configuration" on the OSD Pro setup screen.
Nov 19, 2012, 12:22 AM
FPV junkie
m_beeson's Avatar

If you need further assistance, there are many qualified people who frequent this thread.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product OSD PRO from Eagle Tree (RTH, AHI, Waypoints, Variometer, Voice, now shipping) billpa FPV Equipment 11447 Jun 20, 2017 10:48 PM
Discussion Wind and the Eagle Tree RTH hornant FPV Talk 21 Apr 08, 2013 09:24 AM
Help! Eagle Tree RTH ZII issue ? hotdog1 FPV Talk 9 Oct 24, 2012 11:59 PM
Discussion Where can I find RTH Manual Eagle Tree OSD pro? rapghsi FPV Talk 3 Oct 04, 2010 03:11 PM
Discussion Need help with Eagle Tree OSD RTH! Ellis108 FPV Talk 2 Nov 30, 2009 11:28 PM