Thread Tools
Jan 11, 2013, 09:14 PM
Registered User
Quote:
Originally Posted by ridge_racer View Post
Keep us updated on this until it is resolved. I have been back and forth too with Sam in regards to some spare parts for my crashed 500. Every email he states that he is shipping it out and will send me the tracking later to no avail... Not a good sign. I wish when something is going on with a company they would be forthecoming with information vs the runaround.
Hello Ian ,your 500 parts have been sent , as we are updating system , now some problems are with my e-mails , DHL Number is 7746475155. please have nice days .
Sign up now
to remove ads between posts
Jan 11, 2013, 09:28 PM
Registered User
mhills51's Avatar
Quote:
Originally Posted by Samhobby View Post
Dear mhills51 , Servos have been sent to you via DHL express as we can offer the good service and promise , tracking numnber is 7746475030, During these days ,we are still updating our system ,if we don't give you respond in time , please kindly understand.have nice days .
Well my optimism was well founded.
Jan 11, 2013, 10:12 PM
Registered User
Quote:
Originally Posted by Samhobby View Post
Hello Ian ,your 500 parts have been sent , as we are updating system , now some problems are with my e-mails , DHL Number is 7746475155. please have nice days .
Thanks for the update Sam. You had me a little worried. Looking forward to the parts..
Jan 12, 2013, 12:21 AM
Registered User
Quote:
Originally Posted by mhills51 View Post
Well my optimism was well founded.
we have sent you our new high voltage servos for VCTRC 550 DFC helicopter , please see the swashplate servos VCTRC VT710M HVspec here :

FEATURE:
--High Voltage digital Programmable servo
--standard size
--Aluminium and titanium gears
--Coreless motor
--Dual ball bearings
--CNC aluminium middle hull
--Waterproof
SPECIFICATIONS:
Dead band: 2μs
Control System: +Pulse Width Control
Working frequence: 1520μs / 330hz
Operating Voltage: DC6.0~8.6 V
Operating Temperature Range: -10 to + 600C
Operating Speed (6.0V): 0.11sec/60 degrees at no load
Operating Speed (7.4V): 0.09 sec/60 degrees at no load
Stall Torque (4.8V): 11.62 kg.cm (161.40 oz/in)
Stall Torque (7.4V): 15.22kg.cm (211.41oz/in)
Potentiometer Drive: Direct Drive
Dimensions: 40.5X20.2X40.2mm /1.59 X0.80X1.42 in
Weight: 63.5 g (2.24oz)
Connector Wire Length: JR 265 mm (10.43in)


tail servo VCTRC VT780M HV spec :


FEATURE:
--High Voltage digital Programmable servo
--standard size
--Aluminium and titanium gears
--Coreless motor
--Dual ball bearings
--CNC aluminium middle hull
--Waterproof

-- Ideal for550 600-700 helicopter tail

SPECIFICATIONS:
Dead band: 2μs
Control System: +Pulse Width Control
Working frequence: 1520μs / 330hz
Operating Voltage: DC6.0~8.4 V
Operating Temperature Range: -10 to + 60 degree
Operating Speed (6.0V): 0.061sec/60 degrees at no load
Operating Speed (8.4V): 0.043sec/60 degrees at no load
Stall Torque (6.0V): 5.92 kg.cm (82.23 oz/in)
Stall Torque (8.4V): 7.53kg.cm (105.59 oz/in)
Potentiometer Drive: Direct Drive
Dimensions: 40.5X20.2X35.5mm /1.59 X0.80X1.40 in
Weight: 57.5 g (2.03oz)
Connector Wire Length: JR/FUTABA 265 mm (10.43in)
Jan 12, 2013, 01:51 AM
Registered User
mhills...you might need an rx battery to get the most from these servos..
Jan 12, 2013, 08:42 AM
Registered User
mhills51's Avatar
Quote:
Originally Posted by ridge_racer View Post
mhills...you might need an rx battery to get the most from these servos..
That is what I am using, but now I can dump the regulator
Jan 13, 2013, 07:42 PM
Registered User
Hello Everybody!

Good News ! The new 3.0 version 3AXIS gyro is coming soon ,it has been developed through VCTRC Co.,LTD efforts and all testings .
3.0 version 3AXIS gyro will be finished on 15th,March or in April , Welcome all people to enquire about it . Thanks so much !
Last edited by Samhobby; Jan 14, 2013 at 12:13 AM.
Jan 13, 2013, 09:55 PM
Registered User
Quote:
Originally Posted by Samhobby View Post
Hello Everybody!

Good News ! The new 3.0 version 3AXIS gyro is coming soon ,it has been developed through VCTRC Co.,LTD efforts and all testings .
300 version 3AXIS gyro will be finished on 15th,March or in April , Welcome all people to enquire about it . Thanks so much !
Is it going to be just a firmware update for the current 3GX gyro or is it 100% new? Do you have any specifications or early pictures?
Jan 13, 2013, 11:32 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by Samhobby View Post
Hello Everybody!

Good News ! The new 3.0 version 3AXIS gyro is coming soon ,it has been developed through VCTRC Co.,LTD efforts and all testings .
300 version 3AXIS gyro will be finished on 15th,March or in April , Welcome all people to enquire about it . Thanks so much !
Sounds very interesting, Sam. Any more information about it would be much appreciated.

Gosh, HV servos and now a new 3.0 version FBL gyro. Very exciting!

I think the VCTRC 1200kv motor would be a good choice for the new Goblin 500, as well.
Jan 14, 2013, 03:53 AM
Mallcopterist
2Doggs's Avatar
Quote:
Originally Posted by Samhobby View Post
Hello Everybody!

Good News ! The new 3.0 version 3AXIS gyro is coming soon ,it has been developed through VCTRC Co.,LTD efforts and all testings .
3.0 version 3AXIS gyro will be finished on 15th,March or in April , Welcome all people to enquire about it . Thanks so much !
Does it use the Invensense ITG-3200 chip?
Jan 14, 2013, 08:14 PM
Registered User
It's a copy of BeastXV3,the chinese manufacturer is BigaOle,check the news:
http://www.bglmodel.com/news_read.asp?id=157
Jan 14, 2013, 08:38 PM
Registered User
Quote:
Originally Posted by Bigbond View Post
It's a copy of BeastXV3,the chinese manufacturer is BigaOle,check the news:
http://www.bglmodel.com/news_read.asp?id=157
Wow...V3 already?? Scary..
Jan 14, 2013, 08:57 PM
Registered User
mhills51's Avatar
I would not get hopes up for V3. It is most likely V2 in matching beast software. That just means it will work with s-bus and sat's plus less vibration problems. V3 software is programmable for blade phasing and computer programming.

To most of us V2 is what we have been waiting for.
Jan 15, 2013, 11:32 AM
Registered User
Quote:
Originally Posted by ridge_racer View Post
Thanks for the update Sam. You had me a little worried. Looking forward to the parts..
Got my parts today. Everything looks well made. Will rebuild my 500 next week. I just need to get a set of blades.
Jan 22, 2013, 01:04 AM
Registered User
http://www.bglmodel.com/news_read.asp?id=159

the chinese factory is looking for 3D pilots now,good opportunity to get free one,jeje


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ALZRC 3GY V2/Robird G31 Flybarless 3-Axis Gyro beenflying Mini Helis 1974 Aug 07, 2016 11:24 AM
New Product Vctrc 3gx fbl keris Mini Helis 2 Sep 19, 2012 11:41 PM
Alert Hobby King NEW 3 Axis Gyro Flybarless system w/USB Programmer $45 Mahu Hot Online Deals 6 Jun 20, 2012 03:45 AM
Discussion Hobbyking ZYX 3-Axis Flybarless System Gyro old4570 Electric Heli Talk 4 Mar 15, 2012 10:18 PM