New Products Flash Sale
Thread Tools
Old Dec 07, 2012, 06:13 AM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
Sam....Any update on any new firmware for the gyro to allow satellite rx use?
Sign up now
to remove ads between posts
Old Dec 07, 2012, 06:17 AM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
Quote:
Originally Posted by beenflying View Post
Align have been trying for a long time to get their gyro to fly more like this gyro, without success.
BF...We both have tried a good amount of 3 axis gyros and quite frankly I have never had one fly this good and sim like out of the box...And so hands off too...already saved me over 100 bucks in parts in saves vs crashes...

Just to keep this a gyro only thread, I created a new thread for the 550e in the large heli section and removed some posts related to it. Sorry for the minor detour BF...
Old Dec 07, 2012, 07:05 AM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
No problem with me. I'm just as likely to start talking about something off topic, plus it was great to see that new VCTRC 550DFC combo. If I hadn't already spent too much on my helis recently, I could be very tempted.
Old Dec 07, 2012, 09:34 PM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
It was really gusty today, but as promised here's a short video of the ALZRC Devil 450 FAST using the VCTRC 3GX. Just cruising around at home, to show you how smooth it is, and to test out the fixed hat cam.

The entire flight was at 88% flat throttle. See the video description for more details about the heli.

ALZRC Devil 450 FAST with the VCTRC 3GX (3 min 31 sec)
Old Dec 07, 2012, 09:43 PM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
I'll tell you.That Devil 450 body kit makes the 450 frame look so much bigger. The gyro flies as smooth as the HB800 and for less at the moment.
Old Dec 08, 2012, 04:05 AM
mrmarc is offline
Find More Posts by mrmarc
Not da momma!
mrmarc's Avatar
Really liking the look of that kit, in particular the color scheme you chose. If I weren't so set on my 550 upgrade, I'd be getting that...or maybe even one of the 480's.
Old Dec 08, 2012, 04:15 AM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
The Deveil 480 Rigid looks great too for a more classic look.
http://www.rc711.com/shop/alzrc-devi...it-p-7033.html
Old Dec 11, 2012, 08:54 PM
mhills51 is offline
Find More Posts by mhills51
Registered User
mhills51's Avatar
I just watched a friend fly his devil 450 today. Now he is using the old 3cell packs and he has a micro servo on the tail, but his balanced with no problems and still had room to move the pack forward. Maybe you need heavier 6cell packs lol!
Old Dec 11, 2012, 09:52 PM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
Interesting. My WinMax 50C batteries are up there in weight.

Yes, probably the micro servo helped. I was thinking I might try the Fitec FS9357D, instead of the DS520 with the part metal case.

Also the new V2 tail pitch slider setup must be heavier as well. Anything back there, really adds up. Perhaps I should also try some CF tail blades.
Old Dec 11, 2012, 11:46 PM
Madog71 is offline
Find More Posts by Madog71
Frogfish
Madog71's Avatar

VCTRC 3GX gyro...


Hi bf,

Nice video, smooth flight, after some fine tuning my VCTRC 450 Pro FBL is flying now as smooth as yours, I really like this VCTRC 3GX beastX clone really really nice. I decide now to convert my V450D01 with this gyro ASAP. No more RX2702 headache...
Old Dec 12, 2012, 03:22 AM
Samhobby is offline
Find More Posts by Samhobby
Registered User

vctrc main blades from 450-600 sizes


vctrc main baldes are greater too , i have listed some spec for you to view ,

such as

vctrc trex 450 rc helicopter 3G main baldes 325mm
vctrc trex 550 rc helicopter 3G main baldes 520mm
vctrc trex 600 rc helicopter 3G main baldes 600mm

Go to attachments ,see more images
Old Dec 12, 2012, 06:37 AM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
The first set of 3G blades had perfect CG and only needed a little tape to balance the weights. Blades seem very stiff too. Well made.
Old Dec 12, 2012, 06:43 AM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
Quote:
Originally Posted by Madog71 View Post
Hi bf,

Nice video, smooth flight, after some fine tuning my VCTRC 450 Pro FBL is flying now as smooth as yours, I really like this VCTRC 3GX beastX clone really really nice. I decide now to convert my V450D01 with this gyro ASAP. No more RX2702 headache...
Thanks Madog. I'm glad to hear your VCTRC 3GX is flying well also. It certainly makes this hobby more affordable with these good quality low priced units. I hope your V450D01 flies well with it, also.
Old Dec 12, 2012, 06:45 AM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
Quote:
Originally Posted by Samhobby View Post
vctrc main baldes are greater too , i have listed some spec for you to view ,

such as

vctrc trex 450 rc helicopter 3G main baldes 325mm
vctrc trex 550 rc helicopter 3G main baldes 520mm
vctrc trex 600 rc helicopter 3G main baldes 600mm

Go to attachments ,see more images
Great looking blades, Sam. I might have to try some of these, as well.

I see there is also a 430mm version for the 500.
Old Dec 12, 2012, 09:50 AM
mhills51 is offline
Find More Posts by mhills51
Registered User
mhills51's Avatar
Quote:
Originally Posted by Samhobby View Post
vctrc main baldes are greater too , i have listed some spec for you to view ,

such as

vctrc trex 450 rc helicopter 3G main baldes 325mm
vctrc trex 550 rc helicopter 3G main baldes 520mm
vctrc trex 600 rc helicopter 3G main baldes 600mm

Go to attachments ,see more images
Oh sure put those out right after I spent all my money on black Friday on blades that I thought were a good deal lol! Timing is everything!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ALZRC 3GY V2/Robird G31 Flybarless 3-Axis Gyro beenflying Mini Helis 1974 Aug 07, 2016 12:24 PM
New Product Vctrc 3gx fbl keris Mini Helis 2 Sep 20, 2012 12:41 AM
Alert Hobby King NEW 3 Axis Gyro Flybarless system w/USB Programmer $45 Mahu Hot Online Deals 6 Jun 20, 2012 04:45 AM
Discussion Hobbyking ZYX 3-Axis Flybarless System Gyro old4570 Electric Heli Talk 4 Mar 15, 2012 11:18 PM