Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Feb 03, 2013, 03:58 PM
robertboxhoorn is offline
Find More Posts by robertboxhoorn
Flying Dutchman!
robertboxhoorn's Avatar
Cant make anything from the cad file :-(
Can you upload it in dwg or dxf
Last edited by robertboxhoorn; Feb 05, 2013 at 10:43 AM.
Sign up now
to remove ads between posts
Old Feb 03, 2013, 11:31 PM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Conversion of formats sometimes works, but I'm not having much luck at it with this project. I'll work some more on it.
Old Feb 05, 2013, 03:54 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
The best I can do for another version is an STL file. I'll try to figure out a way to get to DXF. All my attempts so far either fail, or butcher the part. I made these STL files in four parts so it will be easier to work with. Should look like the Jpegs, when assembled.
I'll keep working on the tabbed parts.
I posted a better Bobcad file in my previous post. https://www.rcgroups.com/forums/show...4#post23998633
Last edited by Roto Rob; Feb 09, 2013 at 04:35 AM.
Old Feb 09, 2013, 04:34 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Ok, All the parts are now uploaded in CAD. https://www.rcgroups.com/forums/show...4#post23998633
Hope its enough for some to make it.

Continued gluing the fans in place. Need to route the servo wires, then I can glue the fuselage halves together.
Last edited by Roto Rob; Feb 09, 2013 at 03:00 PM.
Old Feb 09, 2013, 01:56 PM
robertboxhoorn is offline
Find More Posts by robertboxhoorn
Flying Dutchman!
robertboxhoorn's Avatar
---
Last edited by robertboxhoorn; Feb 11, 2013 at 10:22 AM. Reason: Sorry I'm blind....
Old Feb 10, 2013, 03:00 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Decided to inlay the servo wire to the inside of the duct. Think I will tie it in with thread, and glue to keep it from coming loose.
Old Feb 10, 2013, 03:37 AM
pdawg is online now
Find More Posts by pdawg
Need 4 Speed!
pdawg's Avatar
That looks very nice RR! Not much room in there for wiring! Small models are tough!
Old Feb 10, 2013, 03:54 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Yes, I keep thinking I should not build anything small, but go ahead and do it anyway.
Old Feb 12, 2013, 04:58 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Got the electronics completed. Taped it together to do some test glides. I think it is ok on the CG. Was easy to throw into a glide. Might have been a little nose heavy, but not sure since I stopped after the second try. Hit the leg of the workbench. Scrunched the nose a little. Think I can get it straight, without having to make a new nose.
Old Feb 12, 2013, 02:47 PM
chester2240 is offline
Find More Posts by chester2240
Registered User
chester2240's Avatar
i kept breaking the nose on my last F-22, make sure when you put it in your car to set it on the floor .

If you want some good painting tips or help let me know! I have an air bursh and loads of paint
Old Feb 13, 2013, 04:47 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Might have to take you up on the paint help, you do nice work. I have an airbrush. I do ok on most painting, but need some practice on painting fine details.
The nose repair came out decent. After the fiberglass is on it, it should be hard to notice.
Glued the fuselage halves together tonight. Waiting for glue to dry. Weight is at 92 grams so far, (all parts including lipo).
Last edited by Roto Rob; Feb 14, 2013 at 03:38 AM.
Old Feb 13, 2013, 02:51 PM
chester2240 is offline
Find More Posts by chester2240
Registered User
chester2240's Avatar
I'll pm you my number.
I could even give you my last f22 airframe im not using it any more its pretty beat up but gives you the idea how i did it.
Im using the cheap hobbyking paintbrush it does good work but im looking forward to the day i can get a badger
Old Feb 18, 2013, 04:18 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
My airbrush is a Badger. Its good, have a little trouble getting a very fine spray. But usually I have sprayed acrylics with it, so not the best paint for that. It does work better than the cheapo plastic one I had before it.

I got the fiberglass finished. Started on filler, Probably mixed it to thin. So likely will need another coat. I'll see when it dries.
Old Feb 21, 2013, 04:03 AM
Roto Rob is offline
Find More Posts by Roto Rob
Registered User
Not pink anymore. Maybe a second coat, and I can work on the details.
Old Feb 21, 2013, 04:25 PM
robertboxhoorn is offline
Find More Posts by robertboxhoorn
Flying Dutchman!
robertboxhoorn's Avatar
That looks sleek! Great job



I've got a great color to spray ;-)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold TX LPU: 30mm EPO Nano F-86 Sabre - PNP w/batteries: $55 Roswalt Aircraft - Electric - Jets (FS/W) 2 Jul 28, 2012 05:03 PM
Sold LPU San Antonio TX: JPower 50mm MiG-15, F-86, F-22 and F-35. FoamJunkE Aircraft - Electric - Jets (FS/W) 3 May 09, 2012 01:00 PM
For Sale Great Planes F-86 Micro EDF 30mm with Anylink $85 Shipped tsever00 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Mar 28, 2012 04:01 PM
Alert HEY EVERYONE! the great planes 30mm f-86 foam parts are all in stock! Mason W. Micro EDF Jets and Power Systems 5 Mar 05, 2012 10:28 PM
Off Site Great Planes 30mm Brushless Micro EDF F-86 Sabre battery adapters glenn2626 Aircraft - Electric - Batteries & Chargers (FS/W) 0 Feb 26, 2012 02:17 PM