Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 30, 2013, 12:43 AM
iBoat is offline
Find More Posts by iBoat
Registered User
The mast is a foil section with miniature harken track on the back side for sail slides. The prototype cost about $70usd to layup. With boom and other fittings around $100. Version2.0 will be slightly different, but pretty similar.

Sidetracked with a ten foot open type boat we are starting. This is a "sit in" model. Writing on some components for the deck to arrive so we can lay that out.

We're close to releasing some pics of the hulls.
Sign up now
to remove ads between posts
Old Feb 25, 2013, 02:38 AM
Rssailor is offline
Find More Posts by Rssailor
Registered User
Any updates? Still interested in a kit when you get em ready. Ryan
Old Mar 09, 2013, 11:53 AM
iBoat is offline
Find More Posts by iBoat
Registered User
Hull number 1 has been pulled from the mold. We'll have detailed pics this afternoon of the hull, the layup, the plug and the mold. Just need to clean up the PVA residue. Deck should be on tomorrow, or close to being on. At least dry fit in place so we can get internal issues worked out. check out for details later today/tonight.

glass boats we are looking at about $100 for the hull and deck. carbon about $250.

I have four carbon boats ordered, and one glass hull we'll start laying up next week. We want to check hull number one first. Unfortunately this project dragged out a little longer than expected. but the wait has been WELL worth it for us. We have an amazing looking clear coat carbon hull for our first model.
Old Apr 28, 2013, 09:38 AM
canno1797 is offline
Find More Posts by canno1797
Registered User
Hi iboat,

I would like to have a go at building one of your hulls but I can not find a link to the hull file down load. I have been to your blog that shows all of the great work but just can't find a link. I'm I blind or just a bit thick ?.
Last edited by canno1797; Apr 29, 2013 at 05:28 AM.
Old Jun 29, 2013, 01:23 PM
fizzzy is offline
Find More Posts by fizzzy
Registered User

TP 52 progress

just wondering how progress is coming on the TP52s
Old Jan 25, 2014, 10:33 PM
Rssailor is offline
Find More Posts by Rssailor
Registered User
Very interested to see if your project has built any boats? Post some updates here Iboat. Ryan
Old Mar 15, 2014, 06:24 PM
Rythem1 is offline
Find More Posts by Rythem1
Registered User
Yes I would like to hear some news on this project or one like it. Looking for a new boat.
Old May 12, 2015, 10:56 AM
SeattleRCSailor is offline
Find More Posts by SeattleRCSailor
The Salish 475 Sailor
SeattleRCSailor's Avatar
Hi Chris,

Thanks for commenting on my new Salish 475. It is sort of similar to the idea that you're going after here with the TP52. I'm very excited to see the finished boat.

I'm sure I'll have loads of questions when I finally read through this thread. When might a completed boat be ready? Any pics? How much will the builder need to complete on the carbon hull?

Good luck!

Old May 12, 2015, 11:25 AM
Rssailor is offline
Find More Posts by Rssailor
Registered User
Did the TP 52 class ever get started? Still interested out here in SF, sounds like a very cool boat.
Post a few pictures when you can. PM me kit prices to. Ryan

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Crack Yak Builder in So Cal Wanted Moparbob Aircraft - Electric - Airplanes (FS/W) 4 Sep 22, 2012 11:22 PM
Help! Builder Wanted for Octocopter Project Canoctocopter Multirotor Talk 0 May 02, 2012 04:04 AM
Question Sailor man onfinal32 Steam Boats 6 Apr 26, 2012 08:25 PM
Build Log R/c Tp52 isobaryachts Sailboats 2 Jul 24, 2009 03:25 AM
Build Log Tp52 deddie Sailboats 1 May 07, 2009 11:48 PM