26" Edge 540QQ 280 BNF by E-Flite - Page 10 - RC Groups
Thread Tools
Dec 02, 2012, 02:13 PM
certified crash instructor
Yeah, I notice the same thing you're talking about on mine too. I thought maybe the firewall was loose, glued it again and still vibrates.
Sign up now
to remove ads between posts
Dec 02, 2012, 06:30 PM
3D Enthusiast
Orem_Aeronut's Avatar
Kind of a noob question, but what does it mean when the motor is "cogging?"
Dec 02, 2012, 06:48 PM
The Earth got in the way!
kuczy's Avatar
When the motor bounces back and forth or shutters
Dec 02, 2012, 06:53 PM
3D Enthusiast
Orem_Aeronut's Avatar
Quote:
Originally Posted by turnerm
I can't seem to get the mount off. It appears to be one with the motor casing.
after you remove the set screws, there is a tiny horseshoe-shaped retainer at the end of the shaft that you can remove with some long nose pliers or tweezers. Hard to explain but easy to do.
Dec 02, 2012, 08:33 PM
The Earth got in the way!
kuczy's Avatar
No need to remove the C clip. It's just a tight fit. A pair of needle nose pliers and a firm twist and it'll come off. Did mine earlier.
Dec 02, 2012, 09:09 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by kuczy
No need to remove the C clip. It's just a tight fit. A pair of needle nose pliers and a firm twist and it'll come off. Did mine earlier.
But now it won't fit the Park 300 because the shaft diameters are different. That Park 280 won't fit over the Park 300.
Dec 02, 2012, 09:51 PM
certified crash instructor
Maybe this might work for the park 300? http://www.e-fliterc.com/Products/De...rodID=EFLM1157 0?
Dec 02, 2012, 10:08 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by slo-fly
Maybe this might work for the park 300? http://www.e-fliterc.com/Products/De...rodID=EFLM1157 0?
Really depends on whether those mounting holes fit to the stock mount. I'm guessing the Park 340 is the same width as the Park 300 which is too wide for the stock mounting "plate"
Dec 03, 2012, 07:21 AM
God is Good
TMAC4123's Avatar
On a side track note..... How are the servos that come with the plane?
Dec 03, 2012, 08:35 AM
The Earth got in the way!
kuczy's Avatar
I can't say. Only 6 flights before the motor went south.
Dec 03, 2012, 12:03 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
Quote:
Originally Posted by alexjschauer
Alright guys, Model Airplane news is sending me one of these babies to do a review on. I'm only 13
http://www.modelairplanenews.com/blo...shop-aj-slick/
There is my first one.
I am a little nervous on how to approach the QC issues (if they are present).....

They're also sending me a Spektrum Compter radio,(I run the Futaba 8FG)

I'll let you guys know when I have it done, and I would like some feedback from you. I will have to PM it since it is against the rules to post it......
Would like some feedback/suggestions when I'm done!!

P.S. I get to interview QuiQue too
Cool. How did you pull this off?
Dec 06, 2012, 02:05 PM
Team Twisted!
hone1er's Avatar
3D
edge 540qq (4 min 20 sec)
Dec 06, 2012, 07:17 PM
God is Good
TMAC4123's Avatar
Quote:
Originally Posted by hone1er
Was it windy? Lots of wing rocking!
Dec 07, 2012, 02:19 AM
Team Twisted!
hone1er's Avatar
Quote:
Originally Posted by TMAC4123
Was it windy? Lots of wing rocking!
It was breezy but not bad. It can get rocking pretty good at times but other times it gets pretty locked into the harrier. I've only been flying mine for a few days so i still have to get used to some things.
Dec 07, 2012, 08:27 PM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
Quote:
Originally Posted by hone1er
I went to get rid of a 3d helicopter that has been sitting on my shelf for over a year unrepaired, unused, even though I had the parts. I was going to try to trade for one of these, but they sold out.

I ended up trading $25 cash and the heli for a carbon cub instead. Turns out 3 of the servos were bad, so I am happy. It was a win/win deal. The CarbonCub will be something to goof around with when the flying field is busy, or maybe to take to work and fly around from the roof

But e-flite should thank you for that video...it will help sell a lot of planes seeing what that thing can do...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-Flite P-40 Warhawk 300 ARF - 25 inch WS kydawg1 Electric Warbirds 1979 Nov 11, 2016 05:53 AM
Sold E-flite Delta-V 15 69mm unit w/E-flite 15 BL 3200kv and E-flite 60A Pro micromantis Aircraft - Electric - Power Systems (FS/W) 0 Sep 11, 2012 06:01 PM
Discussion F-22 Raptor 24" WS kc2pxp Foamies (Scratchbuilt) 10 Aug 08, 2012 08:21 AM
Sold E-flite 22-Amp BL ESC Combo with the E-flite park 450 pnp 890kv outrunner. hobby-plane-rc Aircraft - Electric - Power Systems (FS/W) 2 May 08, 2008 11:13 PM
Sold E-Flite 450 w/ E-Flite 22 amp ESC Bob Shultz Aircraft - Electric - Power Systems (FS/W) 3 Dec 08, 2007 07:53 PM