New Products Flash Sale
Thread Tools
Old Nov 19, 2012, 10:07 PM
slo-fly is offline
Find More Posts by slo-fly
certified crash instructor
The apc 7x4E looks to be the best prop upgrade on 3s. It pulls 133 watts @ 11.7 amps, stock is 112 watts @ 9.9 amps. The 7x3.8 slow fly pulls 155 @ 13.9 amps. These tests were done static on a full battery, I'd say the 7x4E is pushing the limits but still safe with a little throttle management on a stock edge.
Sign up now
to remove ads between posts
Old Nov 19, 2012, 10:13 PM
BigEast is offline
Find More Posts by BigEast
Enjoying life through flight
So..... Just got the Edge. Have been having some troubles, especially with removing the aileron servo leads from the y-harness. After I finally separated them, the fuselage cracked from the recoil of separating the leads. Then after my first flight, a light landing in grass resulted in cracked/bent landing gear. Lastly, the manual doesn't give recommended differential!mixing. It says to go to the e-flite website for advanced settings but nothing is there. There aren't any program files for the Dx7/8/18 either. Someone please persuade me to keep this plane!
Old Nov 19, 2012, 10:22 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
This what MikeRX on Eflite zero thread said about the 340 motor

With a 460 mah 3s and 7x4" prop it pulls about 13amps at 130 watts static.
Now it has around 20 oz of thrust to pull the same 8.9 oz of weight!
(Stock is around 9oz thrust on 2s, and 14 on 3s)
Old Nov 19, 2012, 10:24 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
Quote:
Originally Posted by Fish99 View Post
Think I am all in on this one ... though I will definately blame you when I am explaining it to my wife Jerry!

Marlin
That's OK,,, just say Jerry MADE me do it. :-)
Old Nov 19, 2012, 10:29 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
Quote:
Originally Posted by BigEast View Post
So..... Just got the Edge. Have been having some troubles, especially with removing the aileron servo leads from the y-harness. After I finally separated them, the fuselage cracked from the recoil of separating the leads. Then after my first flight, a light landing in grass resulted in cracked/bent landing gear. Lastly, the manual doesn't give recommended differential!mixing. It says to go to the e-flite website for advanced settings but nothing is there. There aren't any program files for the Dx7/8/18 either. Someone please persuade me to keep this plane!
Yes those very small servo wires ARE a pain!! And the plugs take a bit of patience and some tweezers??? But the bent landing gear in grass??? I've accidentally landed mine in grass once with no issues,,, can't you just bend it back??? I think once you get past these issues,, I think you'll find it to be a GREAT flying plane
Old Nov 19, 2012, 10:33 PM
FlyWW1 is offline
Find More Posts by FlyWW1
Registered User
FlyWW1's Avatar
Does anyone have one of these to try out?

http://www3.towerhobbies.com/cgi-bin...?&I=LXHY14&P=7
Old Nov 19, 2012, 10:37 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
Quote:
Originally Posted by slo-fly View Post
The apc 7x4E looks to be the best prop upgrade on 3s. It pulls 133 watts @ 11.7 amps, stock is 112 watts @ 9.9 amps. The 7x3.8 slow fly pulls 155 @ 13.9 amps. These tests were done static on a full battery, I'd say the 7x4E is pushing the limits but still safe with a little throttle management on a stock edge.
Thanks Slofly!!!! Sounds like the apc 7x4 prop is the easy upgrade path,, works out to about 250watts/lb,,, should be just enough performance boost to make her Puuuuurfect!!! And,,, as you said,, with throttle management,, should be OK,, as stock ESC is rated for 12amps for 15sec burst,,, plus that's static, and once unloaded prob amp draw maybe lower ???
Although ,,,,,, the 340 motor on 4S ,,,, could be FUN ,, for those who dare. :-O
Last edited by Airman74; Nov 19, 2012 at 10:39 PM. Reason: Addition
Old Nov 19, 2012, 10:41 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
Quote:
Originally Posted by FlyWW1 View Post
Does anyone have one of these to try out?

http://www3.towerhobbies.com/cgi-bin...?&I=LXHY14&P=7
Looks cool,,, who's gona be first to try it???? :-)
I LOVE the looks of a wood prop,,, but I wonder how much it weighs compares to stock plastic??
Last edited by Airman74; Nov 19, 2012 at 10:44 PM. Reason: Addition
Old Nov 19, 2012, 10:42 PM
flyrtim is offline
Find More Posts by flyrtim
Registered User
Differential mixing help please

I can't help but thought I'd try too as
I've read at least 3 requests for this in past 2 days.
some have asked for dx6i, dx8, etc

thanks in advance

rate/expo settings here
http://www.e-fliterc.com/ProdInfo/Fi...-Manual_EN.pdf

High Rate Low Rate, high expo, low expo

Aileron 25mm / 15mm / Aileron 40% 30%
Elevator 35mm / 8mm / Elev 60% 20%
Rudder 20mm / 13mm / Rudder 35% 20%

EDITED--had wrong info
Last edited by flyrtim; Nov 20, 2012 at 10:32 AM.
Old Nov 19, 2012, 10:46 PM
Airman74 is offline
Find More Posts by Airman74
E sailplane thermal hack
Quote:
Originally Posted by Airman74 View Post
Thanks Slofly!!!! Sounds like the apc 7x4 prop is the easy upgrade path,, works out to about 250watts/lb,,, should be just enough performance boost to make her Puuuuurfect!!! And,,, as you said,, with throttle management,, should be OK,, as stock ESC is rated for 12amps for 15sec burst,,, plus that's static, and once unloaded prob amp draw maybe lower ???
Although ,,,,,, the 340 motor on 4S ,,,, could be FUN ,, for those who dare. :-O
Can you imagine if 3S on this 340 motor produces 20oz of thrust,, what 4S would do??!!! :-O
Old Nov 19, 2012, 10:48 PM
brushless55 is offline
Find More Posts by brushless55
big ignore list
brushless55's Avatar
so where the heck are all the videos of this one?
Old Nov 19, 2012, 10:49 PM
FlyWW1 is offline
Find More Posts by FlyWW1
Registered User
FlyWW1's Avatar
Quote:
Originally Posted by Airman74 View Post
Looks cool,,, who's gona be first to try it???? :-)
I LOVE the looks of a wood prop,,, but I wonder how much it weighs compares to stock plastic??
I looked today at both my LHS but no luck. They couldn't get it for me before the weekend because of Thanksgiving. I was hoping someone would have it on hand to try. As far as weight goes this thing can easily handle a little extra plus wood props are more efficient. So lower amps and more power
Old Nov 19, 2012, 10:50 PM
erkq is online now
Find More Posts by erkq
Registered User
Quote:
Originally Posted by Airman74 View Post
Can you imagine if 3S on this 340 motor produces 20oz of thrust,, what 4S would do??!!! :-O
I'm sure... with this crowd... we're gonna find out! And that's the first time I've used that icon!
RCG Plus Member
Old Nov 19, 2012, 10:58 PM
Drewkc is offline
Find More Posts by Drewkc
Registered User
Can anybody share there differential settings im running a dx6i never had to run ailerons on a different channel before. Also would like to fly this plane more sport like what would be good dual rates and expo. The expo on low rates still seem alittle wild to me. Anybody out there care to help with the differential and maybe some help with dual rates are the low rates insane or do they tame this beast down abit? I have a dx6i thanks for any help. DrewC
Old Nov 19, 2012, 11:02 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by Fish99 View Post
Think I am all in on this one ... though I will definately blame you when I am explaining it to my wife Jerry!

Marlin
I'm out of town or I would've posted a video by now. I'll have one on Tuesday night and hope for a Wednesday maiden.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite 300 A6M5 Zero BNF Basic Afraidtoregister Electric Warbirds 1257 Nov 21, 2016 09:59 AM
Sold BNIB E-flite UMX Beast 3D BNF Basic AS3X (EFLU4850) plus EXTRAS peterswolf Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Sep 14, 2012 08:43 PM
For Sale E-Flite MSR X BNF Basic edition daign Aircraft - Electric - Helis (FS/W) 0 Jun 01, 2012 09:59 PM
Sold Edge 540 3D ARF by E-Flite freirem Aircraft - Electric - Airplanes (FS/W) 2 Feb 28, 2012 07:38 PM
Discussion A6M5 Zero 300 BNF Basic by E-flite BlazingStar Micro Ready-to-Fly 2 Feb 03, 2012 03:22 AM