E-flite Edge 540QQ 280 BNF Basic - Page 209 - RC Groups
Thread Tools
Dec 15, 2012, 08:25 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by erkq
Well, as long as they come out with a Beast in this size, I'll be a happy camper. But with 3S like the Edge!
Agreed!!
Sign up now
to remove ads between posts
Dec 15, 2012, 08:31 AM
Way to many airplanes!
Quote:
Originally Posted by Tomdomification
If he was talking about the Piper Archer then Parkzone is correct. That plane looks awesome but is almost the opposite of this plane :-)
There's no promo vid up yet though...

Tom
Good old Chuck as already posted an un-boxing video of the Archer, if anybody is interested....

Parkzone Archer Un-Boxing/Build/review (9 min 13 sec)
Dec 15, 2012, 08:46 AM
Registered User
FlyWW1's Avatar
Quote:
Originally Posted by carlostomasso
E-flite on this one...
Parkzone!

http://parkzone.com/Products/Default...ProdID=PKZ6180
Dec 15, 2012, 11:41 AM
Registered User
carlostomasso's Avatar

Today


Qqweekend flying
Dec 15, 2012, 11:43 AM
Registered User
carlostomasso's Avatar

Luv the edge


Great day
Dec 15, 2012, 12:24 PM
Gone Huckin'
turnerm's Avatar
I lost my tail wheel today. What replacement are you guys using? I just resorted to doing hover catches but I'd like to have a tail wheel back on there.

Here's a quick video of some flying this morning.

Edge 540 QQ - Hover Catch (6 min 20 sec)
Dec 15, 2012, 12:45 PM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by turnerm
I lost my tail wheel today.......I just resorted to doing hover catches.....
What a show-off!



(I am so envious of that skillz level.........)

Dec 15, 2012, 12:51 PM
Registered User
FlyWW1's Avatar
Nice flying!!!
Dec 15, 2012, 12:59 PM
Team Twisted!
hone1er's Avatar
Quote:
Originally Posted by turnerm
I lost my tail wheel today. What replacement are you guys using? I just resorted to doing hover catches but I'd like to have a tail wheel back on there.

Here's a quick video of some flying this morning.

http://www.youtube.com/watch?v=hf5IF...ature=youtu.be
Niiice dude!

I just bent the wire for the tail wheel back so it drags easily along the ground(as suggested by another member after i lost my tail wheel too)
Dec 15, 2012, 01:20 PM
Registered User
shastamike's Avatar
Quote:
Originally Posted by turnerm
I lost my tail wheel today. What replacement are you guys using? I just resorted to doing hover catches but I'd like to have a tail wheel back on there.

Here's a quick video of some flying this morning.

http://www.youtube.com/watch?v=hf5IF...ature=youtu.be
Someday when I get my Edge I'm gonna learn all those moves, but about 10 times higher in the air. Excellent control turnerm. Thanks for the vid.
Mike
Dec 15, 2012, 01:22 PM
Registered User
ForsheeMS's Avatar
Quote:
Originally Posted by turnerm
I lost my tail wheel today. What replacement are you guys using? I just resorted to doing hover catches but I'd like to have a tail wheel back on there.

Here's a quick video of some flying this morning.

http://www.youtube.com/watch?v=hf5IF...ature=youtu.be
Sullivan makes a tail wheel the works perfect. Aluminum hub with a nice rubber tire. I CA'd a small plastic piece on to hold I in place.

On a side note, I think I'm going to call HH because my Edge has something wrong with it. Won't do any of the stuff in you video.
Last edited by ForsheeMS; Dec 15, 2012 at 01:28 PM.
Dec 15, 2012, 01:24 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by hone1er
Niiice dude!

I just bent the wire for the tail wheel back so it drags easily along the ground(as suggested by another member after i lost my tail wheel too)
Unfortunately I lost the wheel, wire and everything!!

I figure I should be able to find a small wheel on a wire and just glue it up in to the rudder. Or... I could just harrier it into the soft grass or hover catch it.
Dec 15, 2012, 01:25 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by pugsam
What a show-off!



(I am so envious of that skillz level.........)

Quote:
Originally Posted by FlyWW1
Nice flying!!!
Quote:
Originally Posted by hone1er
Niiice dude!
Quote:
Originally Posted by shastamike
Someday when I get my Edge I'm gonna learn all those moves, but about 10 times higher in the air. Excellent control turnerm. Thanks for the vid.
Mike
Thanks guys! I realized after that flight that I had too much expo on my ailerons which was making me chase it around a little. I dropped it down and got much smoother flying...
Dec 15, 2012, 02:13 PM
Beast 60E Maniac
SLK Count's Avatar
nice vid .. what was the setup in this video (Lipo pack/motor ?)
Dec 15, 2012, 02:30 PM
Flying addicted and lovin it!
Fish99's Avatar
Quote:
Originally Posted by turnerm
Thanks guys! I realized after that flight that I had too much expo on my ailerons which was making me chase it around a little. I dropped it down and got much smoother flying...
Yeah I could see how rough and out of control your flying was LOL ... NOTTTTT! That was some fantastic flying, again, turnerm. Great video. You're selling this plane and the 3DHS Slick ... they both look awesome!

Marlin


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite 300 A6M5 Zero BNF Basic Afraidtoregister Electric Warbirds 1261 Mar 11, 2017 09:12 AM
Sold BNIB E-flite UMX Beast 3D BNF Basic AS3X (EFLU4850) plus EXTRAS peterswolf Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Sep 14, 2012 08:43 PM
For Sale E-Flite MSR X BNF Basic edition daign Aircraft - Electric - Helis (FS/W) 0 Jun 01, 2012 09:59 PM
Sold Edge 540 3D ARF by E-Flite freirem Aircraft - Electric - Airplanes (FS/W) 2 Feb 28, 2012 07:38 PM
Discussion A6M5 Zero 300 BNF Basic by E-flite BlazingStar Micro Ready-to-Fly 2 Feb 03, 2012 03:22 AM