Thread Tools
Dec 09, 2012, 12:16 PM
Registered User
carlostomasso's Avatar

Thamk you!


Quote:
Originally Posted by RCBABBEL
Thomas,

Welcome to RCG.
A great place to be!
And post.
Sooo much info!!

That elevator can be straightened a bit.
Take your time and bend the wire rod that connects the ele halves.
Grab the elevator right at the wire U bends and gently twist.
The trick is to make improvements not vice versa.

rc
Great thank you! having the feeling I know you all for ages :0,
Looking forward to share my knowledge
Tomas
Sign up now
to remove ads between posts
Dec 09, 2012, 01:19 PM
Scale Aerobatic Pilot
PropsnWings's Avatar
Quote:
Originally Posted by ForsheeMS
Never noticed that on mine but my right side looks just like yours. Left side is as it should be. Either way it fly just fine so I guess it's nothing to worry about.
Yep, one side of mine the elevator is slightly high on the hinge line. Nothing to concern yourself with "tearing" it off and fixing though. It wont effect the flight.
Dec 09, 2012, 01:23 PM
Scale Aerobatic Pilot
PropsnWings's Avatar
Quote:
Originally Posted by carlostomasso
This one is my friends damaged in delivery
IMO the box was not properly designed to protect the item in transit. The "open" top Styrofoam inside a thin cardboard box is just asking for troubles. I think had they put a "lid" on the Styrofoam, it would have added much more support and protection.
Dec 09, 2012, 01:23 PM
27 yrs. of Aircraft flying.
epoweredrc's Avatar
so if anyone is wondering the stock servo with arm. weigh 4.1grams
I am thinking about installing 2 ds75 e flite servos on my wings so i can fly this thing but not sure. if i had the right ends to plug in I would but one of these ds75 is 8.1grams so its double the weight.

I might just get my dad to order the Power HD DSM-44 and wait for them to get here anyone here ever order from Value hobby before?
Dec 09, 2012, 01:43 PM
Registered User
ForsheeMS's Avatar
Just finished up the mount for my 808 camera. Used a piece of 1/16" aluminum rod CA'd to the receiver cover. Rubber band holds the camera in place and can be pointed forward or rearward. Might be interesting to see how long I can watch the video without throwing up!
Dec 09, 2012, 01:50 PM
big ignore list
brushless55's Avatar
Quote:
Originally Posted by carlostomasso
This is my latest problem on the new edge, flight no 6. I have spend more time fixing mine, somehow i luv it & want give up on this one.

http://youtu.be/nXpmYEq2MiA
Sounds like a bad solder joint on the bullet connector
Easy fix
Dec 09, 2012, 01:52 PM
Registered User
carlostomasso's Avatar
[QUOTE=ForsheeMS;23483439]Just finished up the mount for my 808 camera. Used a piece of 1/16" aluminum rod CA'd to the receiver cover. Rubber band holds the camera in place and can be pointed forward or rearward.
great idea,

I would ad some soft foam inbetween the camera and the fuse to take off some shaking
Dec 09, 2012, 01:54 PM
Registered User
carlostomasso's Avatar
Quote:
Originally Posted by brushless55
Sounds like a bad solder joint on the bullet connector
Easy fix
yep will get my hands on it once I'm back home from work.
So far the working day is a piece of cake, whole shift on RCG
Dec 09, 2012, 02:07 PM
27 yrs. of Aircraft flying.
epoweredrc's Avatar
Okay finally got the Maiden flight uploaded. Nothing special since having servo issues was going easy. but here it is
Maiden flight of edge 540qq (6 min 25 sec)

FF to about 40 secs for the flying
Dec 09, 2012, 02:14 PM
Registered User
ForsheeMS's Avatar
[QUOTE=carlostomasso;23483504]
Quote:
Originally Posted by ForsheeMS
Just finished up the mount for my 808 camera. Used a piece of 1/16" aluminum rod CA'd to the receiver cover. Rubber band holds the camera in place and can be pointed forward or rearward.
great idea,

I would ad some soft foam inbetween the camera and the fuse to take off some shaking
Haha. Guess it doesn't matter now. The camera just died. Oh well, better luck next time!
Dec 09, 2012, 02:23 PM
27 yrs. of Aircraft flying.
epoweredrc's Avatar
[QUOTE=ForsheeMS;23483669]
Quote:
Originally Posted by carlostomasso

Haha. Guess it doesn't matter now. The camera just died. Oh well, better luck next time!
Sounds like my luck is rubbing off on you... lol.
Did you try to reset it? I had lot of trouble with mine thought was dead i took card out and formatted it put it back in and it went back to working
Dec 09, 2012, 02:27 PM
Registered User
Quote:
Originally Posted by bobly
turnerm - your comment makes it more interesting - do you still have the motor handy to test. Consider the esc is something that's been around for some time, but the motor is the new part of the picture, so maybe the most likely to be something different and getting the bad joints or even broken strands in the wire. Edit: he is for sure grabbing the motor side of the connection.
Don't confuse eflite's BL Controller, 10A in the 540qq with the eflite 10-Amp Pro brushless esc.
Same goes for the BL 280 vs the park 280 motors. Both are 1800kv
Dec 09, 2012, 03:43 PM
Scale Aerobatic Pilot
PropsnWings's Avatar
Quote:
Originally Posted by epoweredrc
so if anyone is wondering the stock servo with arm. weigh 4.1grams
I am thinking about installing 2 ds75 e flite servos on my wings so i can fly this thing but not sure. if i had the right ends to plug in I would but one of these ds75 is 8.1grams so its double the weight.

I might just get my dad to order the Power HD DSM-44 and wait for them to get here anyone here ever order from Value hobby before?
Yep, Value Hobby has been great. Had no issues this far.
Dec 09, 2012, 04:47 PM
Scale Aerobatic Pilot
PropsnWings's Avatar
Sorry to ask, but did someone post a link to Turnigy Nano Tech batteries from HK ? I cant find the post, but wanted to see what they picked to use.

Thanks
Dec 09, 2012, 04:55 PM
Registered User
ForsheeMS's Avatar
[QUOTE=epoweredrc;23483725]
Quote:
Originally Posted by ForsheeMS

Sounds like my luck is rubbing off on you... lol.
Did you try to reset it? I had lot of trouble with mine thought was dead i took card out and formatted it put it back in and it went back to working
You hit it. Not sure what went wrong but hit the reset button and its up and running again. Took video with the camera both fore and aft. Got to download it to the computer but I have to get this T-bone steak off the grill and get rid of it first!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite 300 A6M5 Zero BNF Basic Afraidtoregister Electric Warbirds 1261 Mar 11, 2017 08:12 AM
Sold BNIB E-flite UMX Beast 3D BNF Basic AS3X (EFLU4850) plus EXTRAS peterswolf Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Sep 14, 2012 07:43 PM
For Sale E-Flite MSR X BNF Basic edition daign Aircraft - Electric - Helis (FS/W) 0 Jun 01, 2012 08:59 PM
Sold Edge 540 3D ARF by E-Flite freirem Aircraft - Electric - Airplanes (FS/W) 2 Feb 28, 2012 06:38 PM
Discussion A6M5 Zero 300 BNF Basic by E-flite BlazingStar Micro Ready-to-Fly 2 Feb 03, 2012 02:22 AM