Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 26, 2012, 10:04 PM
E sailplane thermal hack
Quote:
Originally Posted by slo-fly
Ok, this is very important info, write it down. The eflm1920 is a 2mm collet that will fit master airscrew props without hub adapters, and apc props. It weighs 2.6g and is 3.99. It also has a little metal nose cone for those that don't want to use the stock spinner. The eflm1935 is a set screw adapter that is very similar to stock, fits the gws and stock props, only has one set screw and weighs 1.3g.
Just ordered these two,,, thanks!!
Sign up now
to remove ads between posts
Nov 26, 2012, 10:08 PM
Registered User
Quote:
Originally Posted by Planecraazy
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!

okay good to know

your 730 TP looks to weigh 57g

my 800/850's weigh 69g-- so I think I shall try em soon.


prop adapters
eflm1935 for GWS props and stock prop
eflm1920 for APC and MAS props

I also just ordered both from Quantum Hobby 8.93 shipped for both--they say they ship immediatly.
Nov 26, 2012, 10:13 PM
E sailplane thermal hack
Quote:
Originally Posted by Planecraazy
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!
So would I notice much of a difference using this battery
http://www.amainhobbies.com/product_...11V-480mAh-JST
Over my Zippy 500mah 35cs weighing 48G??
Nov 26, 2012, 10:44 PM
"Hey yall watch this"...
Planecraazy's Avatar
Quote:
Originally Posted by Airman74
So would I notice much of a difference using this battery
http://www.amainhobbies.com/product_...11V-480mAh-JST
Over my Zippy 500mah 35cs weighing 48G??
I don't have any past experience with zippy batterys, the zippy seems to have a higher c rating .... Close call... Idk....id go with the TP based on my past experience with them.
Nov 26, 2012, 10:54 PM
27 yrs. of Aircraft flying.
epoweredrc's Avatar
Quote:
Originally Posted by Planecraazy
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!
That's good to know and Thunder power are great batterys. I like Gen ace also. Billowy also.I am good with 4 minute flights so I shouldn't need any big batterys
Nov 26, 2012, 11:18 PM
certified crash instructor
I love the thunder power 325mah 65c, 12c charge rate, 35.5g and I'm still getting 4-5 minute flight times with a tad to spare.
Nov 26, 2012, 11:28 PM
certified crash instructor
You'll need a .05" standard allen wrench for the set screws on the stock prop adapter.
Last edited by slo-fly; Nov 26, 2012 at 11:55 PM.
Nov 26, 2012, 11:44 PM
certified crash instructor
Here's some more really good info for those using the gws props, the eflite prop adapter part number eflm1935 has a slightly longer shaft than the stock adapter. This allows you to fit a gws prop without sanding the hub.
Nov 26, 2012, 11:53 PM
Registered User
Quote:
Originally Posted by slo-fly
You'll need a .05 standard allen wrench for the set screws on the stock prop adapter.
.50mm ?
Nov 26, 2012, 11:54 PM
certified crash instructor
.05"
Nov 26, 2012, 11:58 PM
Registered User
Quote:
Originally Posted by slo-fly
.05"
.05" on stock prop adapter, got it

what sizes wrench on other adapters please?
Nov 27, 2012, 12:12 AM
certified crash instructor
The eflm1935 has one set screw that is also .05". The eflm1920 is collet with no set screws, there is a hole in the metal nose cone to stick a small screwdriver or allen wrench to tighten.
Nov 27, 2012, 12:16 AM
certified crash instructor
Here's what the eflm1920 2mm collet adapter looks like with an apc 7x4E prop.
Nov 27, 2012, 12:28 AM
certified crash instructor
Here's the eflm1935 set screw adapter with unmodified gws prop. The stock nose will fit this adapter too, just need a little nose cone trimming.
Nov 27, 2012, 05:23 AM
Registered User
mygeneration's Avatar
Quote:
Originally Posted by Airman74
Did I mention how cool the GWS 7x3.5 ORANGE prop looks?????
:-)
Did i mention i've got 5 gws orange props on my table!
But "STILL" no plane yet
Was hoping to collect one from LHS today, looks like that's not gonna happen, still not in stock!
Cheers


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite 300 A6M5 Zero BNF Basic Afraidtoregister Electric Warbirds 1261 Mar 11, 2017 08:12 AM
Sold BNIB E-flite UMX Beast 3D BNF Basic AS3X (EFLU4850) plus EXTRAS peterswolf Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Sep 14, 2012 07:43 PM
For Sale E-Flite MSR X BNF Basic edition daign Aircraft - Electric - Helis (FS/W) 0 Jun 01, 2012 08:59 PM
Sold Edge 540 3D ARF by E-Flite freirem Aircraft - Electric - Airplanes (FS/W) 2 Feb 28, 2012 06:38 PM
Discussion A6M5 Zero 300 BNF Basic by E-flite BlazingStar Micro Ready-to-Fly 2 Feb 03, 2012 02:22 AM