Thread Tools
Old Oct 24, 2012, 05:51 AM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
Build Log

F-4 Phantom SA 35mm powered Video and Plans added


I've been wanting to do this for awhile but needed to get a handle on a good power set-up, after the "Experimental" jets the stock 35mm SkyAngels fans seem to have the poop to give it a go, Saturday and Sunday, off and on I sat down and drew up the plans, I have plans I did for a 70mm unit but scaling that down wouldnt be the same, I needed to do a few design mods to get it down to 16" span so I just went ahead and re-designed it from the ground up. tried to do my best to get the whole step by step pic sequence. its a simple build, started cutting Sunday eve and finished her up today.
so the specks are:

WS.................16"
LNTH..............28"
FAN................SA 35mm
Servos............2 X 5g
Batts...............350mah 2s or 460mah 3s
Cntrls..............tailarons
AUW...............? havent weight her but shes very lite

heres the build pics,

PS, forgot to mention that it is built from 5mm de-papered $tree foam, LokTite 200 spray adhesive and 5min epoxy.

Joe
Last edited by sloperjoe; Oct 28, 2012 at 04:37 PM.
Sign up now
to remove ads between posts
Old Oct 24, 2012, 06:59 AM
Hover or die is offline
Find More Posts by Hover or die
it wasn't me flying that plane
Hover or die's Avatar
Yes she is sweet..
Still trying to figure out how you build so fast Joe!
Incredible work and very very scale in shape!
Take care...............Chris
Old Oct 24, 2012, 09:14 AM
jahel is offline
Find More Posts by jahel
Registered User
you are the fastest builder even see!!! nice
Last edited by jahel; Oct 24, 2012 at 04:25 PM.
Old Oct 24, 2012, 01:37 PM
nadine is offline
Find More Posts by nadine
vtol fan
nadine's Avatar
What a beautty!!Do you have an PDF for this!?
Old Oct 24, 2012, 04:52 PM
Joe 1320 is offline
Find More Posts by Joe 1320
Registered User
Joe 1320's Avatar
Nice job..... I would love to do one that size.
Old Oct 24, 2012, 05:44 PM
ksqm is online now
Find More Posts by ksqm
Registered User
Well, at least I have a wing started. Scaled down to 12" WS from your original plans. Plan on going with a 25mm EDF for now. Will build to original specs for simplicity. But this is begging for full flying H Stabs and aileron. The project IS in the que. Been kind of stalled for the past week or so though. Time, time, time!!! I need build time.

Ksqm
Old Oct 25, 2012, 03:36 AM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
just waiting for some "stuff" to show up in the mail, should be here tomorrow, I would like to maiden hopefully Friday morning or Saturday, weather looks good for one of those days.

@Ksqm, fortunately for me finding build time isnt hard, I work swing so I usually have 3-4 hours in the mornings that I can spend building if I want, then sometimes a good 2 hours after I get home, I also build on the dining table naa naa naaa so I still have contact with the family pretty much the whole time....so my advice is just start building on the dining table, your wife will fall in love with you all over again, and you'll have more time to build....simple

thanks for the comments all

Joe
Old Oct 25, 2012, 05:59 AM
ksqm is online now
Find More Posts by ksqm
Registered User
Sloperjoe,

Right there witcha. If you take a closer look, I'm on granite counter top.

Ksqm
Old Oct 25, 2012, 02:54 PM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
ahhhhh...you too know the secret to wedded bliss

Joe
Old Oct 25, 2012, 05:12 PM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
Sweet mercy Joe!

A. Fast builder!
B. Sweet looking F4!

Looking forward to seeing this fly.

I barely scratched my butt this week and you've gone and made another jet! Nitro impressed!...
Old Oct 26, 2012, 04:54 PM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
hey Dave,
this one went pretty fast only because I have already built two in the 70mm size so I had a good idea of how to go about building this one...not to mention its half the size witch helps alot
installed the servos and links but still waiting for the fans I ordered, tracking says I should get em today, so hopefully I can get one in it tonight....or tomorrow if they show up...they are in town though



Joe
Old Oct 27, 2012, 03:07 AM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
they showed up, putting one in it now

Joe
Old Oct 27, 2012, 03:55 AM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
Giddyup!

Looks like a nice Sunday coming up tomorrow so some flying for me in the morning. Got lots of camera's this time too.
Old Oct 27, 2012, 02:47 PM
sloperjoe is offline
Find More Posts by sloperjoe
Registered User
sloperjoe's Avatar
here I sit.....watching it rain....once again feeling lied to by the weatherman
hurumph..

Joe
Old Oct 27, 2012, 05:27 PM
NitroCharged is offline
Find More Posts by NitroCharged
Team30 Micro EDF
NitroCharged's Avatar
Sunny and not a breath of wind here this morning Joe - I'm just about to head out the door.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion E-Flight F-4 Phantom Build/Fly Thread 1bwana1 Electric Ducted Fan Jet Talk 3310 Mar 14, 2016 07:47 PM
Question Which F-4 Phantom ? dlovett Electric Ducted Fan Jet Talk 26 Apr 24, 2012 09:32 PM
Found Great Planes "F-4 Phantom" Kit LKruse Aircraft - Fuel - Airplanes (FS/W) 6 Apr 21, 2012 02:08 PM
Sold Vintage Custom RC Aircraft/George Miller F-4 Phantom II kit $325.00 SHIPPED!! stevster Aircraft - Fuel - Jets (FS/W) 1 Apr 19, 2012 11:32 PM
Sold Great Planes F-4 Phantom rcnut1959 Aircraft - Fuel - Airplanes (FS/W) 0 Mar 11, 2012 11:09 AM