EP Concept - Bell 222 body - RC Groups
Thread Tools
Dec 04, 2003, 09:50 PM
A-4 nut!!
skyhawk's Avatar

EP Concept - Bell 222 body


Just finished a full install of the Darth Bell 222 onto my newly re-build Ep concept. Body fits perfectly and requires no mods. This first picture is the body mount that I made.
Sign up now
to remove ads between posts
Dec 04, 2003, 09:51 PM
A-4 nut!!
skyhawk's Avatar
Another view...
Dec 04, 2003, 09:53 PM
A-4 nut!!
skyhawk's Avatar
This is a bottom view of the mount. It is screwed to the bottom of the heli using the stock screws. Mount is made from 1/16 lite ply.
Dec 04, 2003, 09:55 PM
A-4 nut!!
skyhawk's Avatar
This view shows the main body mounted to the body mount.
Dec 04, 2003, 09:57 PM
A-4 nut!!
skyhawk's Avatar
Full body pic 1 ....
Dec 04, 2003, 09:58 PM
A-4 nut!!
skyhawk's Avatar
Full body pic 2...
Dec 04, 2003, 09:59 PM
A-4 nut!!
skyhawk's Avatar
Body pic 3. The tailfin just bolts on! Nice change from gluing it on.
Dec 04, 2003, 10:00 PM
A-4 nut!!
skyhawk's Avatar
Cleared for takeoff!
Dec 04, 2003, 10:01 PM
A-4 nut!!
skyhawk's Avatar
My favorite pic. Too bad it came out slightly blurry.
Dec 04, 2003, 10:05 PM
A-4 nut!!
skyhawk's Avatar
You don't need to remove the nose of the body to get at the battery. There is enough room on the bottom to install and remove the pack. The pack also sits high enough that it is almost completely hidden in the fuse.
Dec 04, 2003, 10:29 PM
Registered User
gregw's Avatar
Wow... Very Nice

How about a video?
Dec 04, 2003, 11:21 PM
Registered User
thazy2's Avatar
All I can say is...............DAMN EXCELLENT!


where do I get one?

How are you flying that w/ the brushed motor? mine barely got out of ground effect.
Dec 05, 2003, 12:51 PM
Scale Builder, RCAPA #29
Rob Schaffer's Avatar

Darth's Website,...


Here's Darth's website, where he advertizes the bodies he has made for the LMH Corona. There are a limited number that will fit other heli's without problems, so check here on the EZone for those that have tried others out. The Bell 222 is a great example. These bodies are nice and lightweight, and can be painted with nearly any model paints.

Great looking Heli,....

Darth's Magnificent Heli Bodies - Click Here
Dec 05, 2003, 03:00 PM
A-4 nut!!
skyhawk's Avatar
Thanx guy's.
The only thing I would advise is to keep the upper deck removable and cut it down the backside so you can take it off without removing the rotorhead. This is due to the fact that the CP rod conections on the swash are difficult to install and remove when removing/installing the rotorhead. It can be done with the upper deck on but it's difficult.


Thread Tools