Parkzone Mini Vapor - Page 32 - RC Groups
Thread Tools
Dec 07, 2012, 09:52 AM
Registered User
TurboRacer's Avatar
I put one of these on my Christmas wish list! We'll see if Santa brings it

I always wanted an airplane I could fly in my house.
Sign up now
to remove ads between posts
Dec 07, 2012, 02:26 PM
QuAd FaNaTiC
Razors edge 29's Avatar
Did maiden today in a small room

Worked well

Already moved control surfaces to inner most hole for more throw

Experimenting with cg location

Not fond of side ways mounted lipo but ill life with it lol

Fun foyer - finally something to fly in a 8x8 room
Dec 07, 2012, 08:08 PM
I'd rather be flying!
turboparker's Avatar
Installed my new prop. The original was seriously warped. Now she's smooth as silk. Just finished two flights of figure-eights in a 10' x 16' space, with a few cw/ccw reversals thrown in. I then flew some fast, banked-turn circuits around the living room & kitchen up on the wing. Even 'jumped my own wake' a few times. Man this thing is a blast! I can hardly wait for my Hyp 70s to show up!

Joel
Dec 07, 2012, 08:25 PM
Registered User
pgoelz's Avatar
Has anyone successfully removed the wing yet? I got my replacement wing (the original was assembled incorrectly) today and set about trying to remove the original wing. HH suggested I use CA debonder on the glue, but that seemed to soften the plastic and the CF rod more than it softened the glue. I got the front post loose fairly easily but ended up destroying the rear dihedral bracket removing it in spite of using a home made slotted jig over the CF rod that provided a fulcrum to pry the wing bracket straight off.

Once I finally got the wing off, I found the front post was a loose fit in the new wing. A bit of thin CA on the post thickened it slightly and while it is not glued, it stays put just fine.

So far, the glide seems better and I don't need right rudder trim any more. I haven't tried flying under power yet..... that will happen on Tuesday unless I decide to give it a go in the family room again..

Paul
Dec 07, 2012, 10:38 PM
Citizen 46
rnettles's Avatar
Quote:
Originally Posted by turboparker
Installed my new prop. The original was seriously warped. Now she's smooth as silk. Just finished two flights of figure-eights in a 10' x 16' space, with a few cw/ccw reversals thrown in. I then flew some fast, banked-turn circuits around the living room & kitchen up on the wing. Even 'jumped my own wake' a few times. Man this thing is a blast! I can hardly wait for my Hyp 70s to show up!

Joel
I picked up my MV the other day and I too am having a blast with it. I do have a slight vibration that I couldn't track down, and just looked at the prop after reading your post, and it has a slight curve to it as well. I guess I'll add that to the list when I go in search of more of those dinky little batteries.

Also, I got sick and tired of the battery "tray" sliding around even during flight. I would launch it at the optimum CG and by the end of the flight with any semi aggressive maneuvers, it would be pushed up against the brick. To solve it, I pushed the tray all the way forward and very very lightly coated only the bottom of the main beam with a thick CA and let it dry. I then came back after it dried and lightly sanded the CA down until the tray would just slide the length only with a determined force moving it. With that solved, now I need to figure out a better alternative to that silly no-stick velcro. I was thinking maybe trying tiny rubber bands around the battery to hold it in place, similar to how prop savers hold the prop to the hub.
Dec 08, 2012, 06:49 AM
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by rnettles
...With that solved, now I need to figure out a better alternative to that silly no-stick velcro. I was thinking maybe trying tiny rubber bands around the battery to hold it in place, similar to how prop savers hold the prop to the hub.
I used a small piece of 10mm heatshrink which I formed over a 1/8"x3/8" piece of wood then glued to the tray. The batteries slide in and stay, no more danglers and dynamic CGs
Latest blog entry: BluFO-XL review by Tim...
Dec 08, 2012, 07:57 AM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by coreman
.....dynamic CGs
"dynamic" CGs

LOL

Dec 08, 2012, 08:26 AM
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by pugsam
"dynamic" CGs

LOL

Great example!!
Latest blog entry: BluFO-XL review by Tim...
Dec 08, 2012, 08:36 AM
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by coreman
Great example!!
Great new avatar photo you have there, too!

Dec 08, 2012, 08:47 AM
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by pugsam
Great new avatar photo you have there, too!

From our indoor holiday flying party last year. The lettering on the shirt ($5 at Wal-Mart) says, "does this suit make me look fat?"

Got to have fun with it!
Latest blog entry: BluFO-XL review by Tim...
Dec 08, 2012, 09:47 PM
Registered User
Notsogood's Avatar
Got this one on my Christmas list. Have the night vapor and love it. This will be fun in the bonus room.
Dec 09, 2012, 02:38 PM
Registered User
flyboy1001e's Avatar

mini vapor setup?


Hi Guys

I just got 2 of the Mini Vapors. The elevator is trimmed up a little, in the neutral position on both of them.
Is this normal? Is the purpose of this a attempt to make it fly slower?
The tail seems to be down in most of the videos.
It does not do the glide test very good this way.
I mechanically extended the linkage so it is neutral in the neutral position and it glides great. Cool little plane.

Just wondering.

Thanks Mike
Dec 09, 2012, 04:20 PM
Have fun
airpower's Avatar
Have you flown them?
Dec 09, 2012, 10:46 PM
Elfi Flyer
Doug Sipprell's Avatar
Will be flying my MV later this week at one of your InDoor events. Hopefully, I will finally "discover" this little plane and develop a bit more interest in it. I only have the original 30mAh lipo supplied with the plane, and LHS doesn't have any spares. My Embers will seem like hot rods compared to the Mini Vapor! . Then, there's the UM Champ with I also fly indoors at the InDoor events. Zoom-Zoom.......

RD
Dec 10, 2012, 05:33 PM
Registered User
I R Irv's Avatar

Doug here's a couple pics for you.


It flies a lot like an Ember, you just don't need near as much room. Mostly Mini-Vapor gear.
TODD


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted I Need a Parkzone (Vapor) DSM2 Rec/ESC/servo "Brick" *** Joe Pierson Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 2 Mar 25, 2012 11:27 PM
Sold parkzone vapor bnf original $50.00 shipped chrisb22 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 3 Mar 03, 2012 02:25 PM